中等后掠机翼平面参数设计与实验研究

采用Euler数值计算方法,对60多种中等后掠角及展弦比的切尖菱形机翼、双三角机翼纵向气动力特性进行了计算、分析和比较,从中筛选出16种切尖菱形机翼、14种双三角机翼进行了全机高速风洞实验研究,给出了机翼的展弦比、前缘后掠角、根梢比(后缘前掠角)及几何扭转变化对全机升力、阻力及俯仰力矩的影响曲线和数据分析,在此基础上提出了用于定量估算两类机翼纵向气动力特性的关系式及修正因子。本文研究结果为建立战斗机机翼气动力设计数据库及飞机气动布局设计提供了实用的数据和设计参考。     

反求工程中经济型快速测量装置的研究

设计了结构简单经济实用的快速测量装置,采用分区域数据补偿方法进行误差补偿,提高了系统的测量精度,将有助于反求工程中测量效率的提高。     

FLOLS误差源建模与仿真研究

菲涅尔光学助降系统(FLOLS)是典型的舰载机光学着舰引导系统。分析了影响FLOLS着舰引导精度的指示误差源和光学误差源,包括稳定平台跟踪误差、光源位置与理想着舰点位置偏差、光源温度、飞行员视觉误差,研究了FLOLS相关系统的工作原理和着舰引导误差的产生机理,建立了各误差源的数学模型。通过对FLOLS着舰过程进行重复仿真,使用标准偏差统计方法,得到各着舰引导误差的统计特性,进而得出各误差源影响着舰精度程度比较。     

Orbit insertion error analysis for a space-based gravitational wave observatory

Constellation is required to be highly stable over several years for a space-based gravitational wave observatory. However, the stability of the constellation can be affected by orbit insertion errors. The effects of orbit insertion errors on the constellation are mainly studied in this paper. Firstly, Monte-Carlo, Unscented Transformation Covariance Analysis Method (UTCAM) and Spherical Simplex Unscented Transformation Covariance Analysis Method (SSUTCAM) are used for simulation. The results indicate that UTCAM and SSUTCAM are highly efficient in calculating, with a relative error of less than 6%. Therefore, it is concluded that because of their accuracy and high efficiency, UTCAM and SSUTCAM can be adequately used in orbit insertion error analysis for a space-based gravitational wave observatory. Secondly, SSUTCAM is used to study the effects of position and velocity errors on the constellation. For the case in this paper, when the position error does not exceed 300 km, and the velocity error does not exceed 4 cm/s, the constellation remains stable.     

基于距离相关分析的航空维修差错影响因素分析

针对一般航空维修差错因素分析中只将相关因素各自独立分析,并将其影响程度进行排序分析方法的局限性,对航空维修差错因素的分类和综合分析,建立基于距离相关分析的航空维修差错影响因素综合分析模型,并通过实例数据分析计算得出航空维修差错相关系数,该相关系数可应用于航空维修差错影响因素的综合关联分析,将航空维修差错因素间的相关性以相关系数定量表示,弥补了传统方法单一性的缺陷.     

Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

A deformation model of flexible,HAMR objects for accurate propagation under perturbations and the self-shadowing effects

A new type of space debris in near geosynchronous orbit (GEO) was recently discovered and later identified as exhibiting unique characteristics associated with high area-to-mass ratio (HAMR) objects, such as high rotation rates and high reflection properties. Observations have shown that this debris type is very sensitive to environmental disturbances, particularly solar radiation pressure, due to the fact that its motion depends on the actual effective area, orientation of that effective area, reflection properties and the area-to-mass ratio of the object is not stable over time. Previous investigations have modelled this type of debris as rigid bodies (constant area-to-mass ratios) or discrete deformed body; however, these simplifications will lead to inaccurate long term orbital predictions. This paper proposes a simple yet reliable model of a thin, deformable membrane based on multibody dynamics. The membrane is modelled as a series of flat plates, connected through joints, representing the flexibility of the membrane itself. The mass of the membrane, albeit low, is taken into account through lump masses at the joints. The attitude and orbital motion of this flexible membrane model is then propagated near GEO to predict its orbital evolution under the perturbations of solar radiation pressure, Earth’s gravity field (J₂), third body gravitational fields (the Sun and Moon) and self-shadowing. These results are then compared to those obtained for two rigid body models (cannonball and flat rigid plate). In addition, Monte Carlo simulations of the flexible model by varying initial attitude and deformation angle (different shape) are investigated and compared with the two rigid models (cannonball and flat rigid plate) over a period of 100?days. The numerical results demonstrate that cannonball and rigid flat plate are not appropriate to capture the true dynamical evolution of these objects, at the cost of increased computational time.     

基于飞行参数的双发飞机发动机疲劳损伤差异分析

为给飞机发动机单机寿命监控提供依据,对两个用户的同型飞机发动机进行疲劳寿命分析。应用雨流计数法统计分析两个用户飞行参数,获得发动机使用载荷谱。应用线性累积损伤理论计算出关键件的疲劳损伤,将其与标准循环疲劳损伤比较,得到发动机飞行换算率。将同侧发动机的飞行换算率、同一飞机左右发的飞行换算率以及两个用户之间的发动机飞行换算率进行比较。计算表明:同一用户同侧发动机飞行换算率之间和两个用户之间的飞行换算率差异较大,同一飞机左右发飞行换算率之间存在一定差异,部分飞机左右发相差较大;两个用户总体的发动机飞行换算率和各个用户内部的发动机飞行换算率均服从对数正态分布;发动机在实际使用中的高低压转子飞行换算率均服从对数正态分布。     

Optimal guidance of extended trajectory shaping

To control missile＇s miss distance as well as terminal impact angle, by involving the timeto-go-nth power in the cost function, an extended optimal guidance law against a constant maneuvering target or a stationary target is proposed using the linear quadratic optimal control theory.An extended trajectory shaping guidance（ETSG） law is then proposed under the assumption that the missile-target relative velocity is constant and the line of sight angle is small. For a lag-free ETSG system, closed-form solutions for the missile＇s acceleration command are derived by the method of Schwartz inequality and linear simulations are performed to verify the closed-form results. Normalized adjoint systems for miss distance and terminal impact angle error are presented independently for stationary targets and constant maneuvering targets, respectively. Detailed discussions about the terminal misses and impact angle errors induced by terminal impact angle constraint, initial heading error, seeker zero position errors and target maneuvering, are performed.     

孔壁通透率对平面附壁射流的影响

本文研究了不同壁面通透率对平面附壁射流动态特性的影响。实验结果表明孔壁减弱、甚至消除了流场中的低频摆动现象。随着孔壁通透率的增加,射流时均附壁点向下游逐渐移动,射流和壁面之间的回流区长度逐渐增大,而射流内侧剪切层内的涡旋与壁面之间的相互作用减小,壁面压强脉动强度变小,附壁射流的动态特性逐渐向自由射流转化。当孔壁通透率为40％左右时,射流与二维平面自由射流类似。距离射流出口不同位置上的壁面脉动压强之间的互谱表明,当孔壁通透率增大以后,射流内侧剪切层中的旋涡向下游传播距离变得更长,传播速度加快,这说明低孔壁通透率情况下的附壁射流中存在的低频摆动现象阻碍了剪切层高频旋涡向下游的发展。