Charge exchange interactions on near-Earth proton radiation for orbit perturbation of high area-to-mass ratio objects

This novel concept expels neutral gas in the presence of geomagnetically-trapped protons in near-Earth orbit. The expelled neutral gas acts to induce charge exchange collisions with the geomagnetically-trapped protons and induce drag on objects which pass through it. The charge exchange collisions between the neutral gas and the geomagnetically-trapped protons create neutrals with similar kinetic energy that are not confined by the geomagnetic field. The charge exchange neutrals are able to collide with orbital objects and perturb their orbits. The delta-v applied by the charge exchange neutral flux is greatest on high area-to-mass objects. Numerical simulation shows charge exchange neutral impacts produce a delta-v on objects on the order of 3.8 x 10⁻¹¹ m/s at a distance of 1 km from the center of the expelled gas in a 1,000 km orbit. The impulse imparted by charge exchange neutral impacts is at least six orders of magnitude smaller than that provided by the induced drag caused by gas expulsion. The localized drag increase can force a majority of small objects into the orbit of the expelled gas cloud, even if that orbit is retrograde to the initial orbit of the objects. This new technique can be applied to the remediation of space debris.     

风扇出口导向叶片低噪声设计Ⅰ:方法与优化

作为"风扇出口导向叶片（Outlet Guide Vanes，OGV）低噪声设计"系列文章的第1篇，本文在现有压气机气动设计流程的基础上，加入了噪声评估过程，建立了基于通流设计的气动/声学一体化设计方法。为提高设计阶段的评估速度，以三维升力面理论与管道声学理论为基础，从通流设计和造型设计输出中提取参数，结合转子尾迹模型，建立了转/静干涉噪声的解析预测模型。以现代大涵道比涡扇发动机风扇/增压级为对象，采用该模型系统分析了OGV轴向掠形与周向倾斜对转/静干涉噪声的影响，获取了轴向掠形角与周向倾斜角等三维设计参数与风扇噪声的关系图谱，初步确定了低噪声设计较优降噪量的掠和倾组合方案。以此为基础，在保持叶尖子午投影位置和弦长不变的前提下，将叶片前缘和径向积叠进行参数化，采用遗传算法进一步开展了OGV的低噪声优化设计，最终获得了2个优化方案，预估的降噪量达到了8 dB。     

AHP中判断矩阵元素最优估计值的误差分析

在AHP模型中，请一组专家对某一属性进行评价，通过适当的数学处理方法，可得判断矩阵元素的最优估计值，并根据残差来确定所求估计值是否达到精度要求，若不符合精度要求则需返还给专家进行重新评估。这是AHP中构造判断矩阵的一种新方法。     

空心长轴深孔加工工艺研究

以某发动机空心长轴零件深孔加工为研究对象,设计了长径比为15,长度超过1米的整体硬质合金刀杆,在某加工项目试验中,应用这种超长整体硬质合金刀杆,在细长比大于10的空心长轴的深孔镗削加工中,改变了传统的深孔加工工艺,满足了空心长轴深孔加工中严格的壁厚差要求,取得了明显的效果.     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.     

小直径深孔加工技术在航空机载行业中的应用

分析总结了国内外小直径深孔加工技术后,介绍了小直径深孔加工技术在航空机载行业中的应用,及其小直径深孔加工时设备选型需注意的问题。     

距离信息对DDFRC算法定位误差的影响与分析

在固定单站无源定位算法中,基于角度(Direct of Arrival)、角度变化率(Direct of Arrival Rate-of-Change)、多普勒频率(Doppler Frequency)和多普勒频率变化率(Doppler Frequency Rate-of-Change)4个观测信息实现定位(即DDFRC定位)算法仅通过单次观测即可实现对目标辐射源的定位。文中通过转移观测的卡尔曼滤波对定位结果进行平滑,较原有算法拥有更好的跟踪效果。同时,对定位误差进行了定量分析,并将距离信息引入算法的仿真分析之中,详细讨论了各个观测量误差在不同距离时对算法定位性能的影响,根据仿真结果,结合定位误差的定量分析对算法性能做出评价。通过仿真分析,得到了定位算法对不同距离下各参数的精度要求,从而为在实际系统中使用该定位算法提供了参考。     

严防通话失误确保航空安全

重点讨论了如何防止空地通话失误，确保飞行安全。分三个问题进行研究：１、因空地通话失误造成的特别重大飞行事故；２、当前中国民航空地通话存在的问题；３、空地通话语言一定要标准化。     

外围投篮命中率的概率分析

利用几何概率的方法，解决投篮命中率问题，为将概率论应用到体育中去提供了新的思路。     

检波器谐振频率数学模型及其频响误差的修正

峰值检波器的频响误差在高频段主要是由分布参数产生的高频谐振误差。本文利用实测数据建立了检波器谐振频率数学模型，根据模型的预测值对检波器和了频响误差修正。计量检定表明修正后的频响误差大大减小。