肋角度对气膜冷却特性的影响

在光滑二次流通道的基础上,分析对比了两种带肋通道(135°肋和45°肋)对气膜冷却特性的影响.采用瞬态液晶测试技术获得了气膜孔下游表面传热系数比与气膜冷却效率分布.使用Fluent软件RANS数值方法对相应结构进行了数值模拟,并使用了realizable k-ε湍流模型.光滑二次流通道模型中,气膜孔内流线呈螺旋状分布,导致较大的孔内速度分离与流动损失.冷气射流分成两部分,其中一股形成一对偏斜的对转涡.135°肋结构中,二次流通道上部分的旋转涡为顺时针方向,使得气流易于流入气膜孔,气膜孔内流线呈直线分布.45°肋结构中,二次流通道上部分旋转涡为逆时针方向,增强了气膜孔内旋转涡.45°肋结构中冷气流入气膜孔之后的流动结构与光滑二次流通道结构相似.135°肋结构气膜冷却效率最大而表面传热系数比最低.     

基于任务分析的飞行机组失误预测研究

在过去的20年内有多起严重事故由机组失误引起,采取措施防止或减少飞行机组失误成为降低航空事故率的关键.通过使用人误预测技术预测机组在执行飞行任务时的失误,寻找失误原因,进一步改进驾驶舱设计或增加培训来降低航空事故率是可行的方法.本研究以民航领域飞行安全需求为背景,在原有人误预测技术基础上,开发了基于任务分析的飞行机组失误预测模型,以某型飞机起飞任务为例,对飞行机组在操纵飞机起飞过程中可能发生的人误进行分析,实现了飞行机组失误的定性和定量预测.     

激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。     

飞机下滑波束导引系统设计及仿真

下滑波束导引系统是飞机在自动着陆时所采用的一种重要无线电波束导引系统。首先,简要阐述了下滑波束导引系统的基本工作原理;然后,对导引系统的运动学环节及下滑耦合器进行分析,对飞机下滑波束导引系统结构进行设计;最后,在MATLAB平台下,对所设计的下滑波束导引系统进行大量仿真研究。仿真结果显示。所设计的下滑波束导引系统结构是合理的,其控制系统是稳定的,且其稳态性能也得到改善。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Auxetic materials have previously been shown to enhance various performances due to its unusual property of becoming fatter when uniaxially stretched and thinner when uniaxially com-pressed (i.e., the materials exhibit a negative Poisson’s ratio). The current study focuses on assessing the potential of an auxetic material to enhance the buckling capacity of a rectangular plate under uniaxial compression. The in-plane translational restraint along the unloaded edges that was often neglected in open literature is taken into consideration in our buckling model proposed in this study. The closed-form expressions for the critical buckling coefficient of the rectangle are provided and the predicted results agree well with those determined by the finite element method. Further-more, the results indicate that the buckling performance of a rectangular plate under uniaxial com-pression can be significantly improved by replacing the traditional material that has a positive Poisson’s ratio with an auxetic material when there is in-plane translation restraint along the unloaded edges.     

歼×飞机攻角位置误差校准的试验研究

本文简述了目前歼×飞机的攻角位置校准的试验方法。通过分析比较 ,认为采用微波空间定位校准法进行攻角位置误差校准优于目前风洞试验校准法     

手持式激光测距仪"测距标准偏差综合评定"的扩展不确定度

在确定的函数关系(数学模型)中,因变量(输出量)随自变量(输入量)的变化规律完全由数学逻辑所确定,自变量到因变量的传递系数(灵敏系数)也可由因变量的标准差和自变量的标准差之比所决定,而与自变量的来历(测量的或者给定的)没有关系[1].本文根据这一基本原理,采用模拟自变量随机变化的方法,成功计算了手持式激光测距仪的测距固定偏差和比例偏差系数的测量不确定度,从而计算出测距标准差综合评定的扩展不确定度,同时解决了复杂的数学模型中多个输入量到输出量的灵敏系数和输出量的不确定度的计算问题.     

Evolution of the orbital elements for objects with high area-to-mass ratios in geostationary transfer orbits

A new population of uncatalogued objects in geosynchronous Earth orbits (GEO), with a mean motion of about 1 rev/day and eccentricities up to 0.6, has been identified recently. The first observations of this new type of objects were acquired in the framework of the European Space Agency’s (ESA) search for space debris in GEO and the geostationary transfer orbit (GTO) using the ESA 1-m telescope on Tenerife. Earlier studies have postulated that the perturbations due to the solar radiation pressure can lead to such large eccentricities for GEO objects with a high area-to-mass ratio (A/M). The simulations showed that the eccentricities of GEO objects with large A/M exhibit periodic variations with periods of about one year and amplitudes depending on the value of A/M. The findings of these studies could be confirmed by observations from the ESA 1-m telescope on Tenerife.