Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

EPB威胁下的地空导弹火力单元生存性研究

分析了电磁脉冲弹(EPB)威胁下地空导弹火力单元的弱点。根据电磁脉冲炸弹对目标的毁伤特点及其搭载对象(武器平台)的特点,建立了电磁脉冲炸弹威胁下的地空导弹火力单元生命力模型,可作为进一步研究电磁脉冲弹威胁下地空导弹火力单元抢修、伪装的理论参考。     

弹道导弹落点精度分析与仿真方法研究

通过对影响弹道导弹的落点精度的因素分类和影响分析,提出了利用仿真技术预测和修正弹道导弹落点偏差的方法。综合诸影响因素对导弹进行全弹道仿真试验设计和分析,为改进设计提供一定的依据。     

基于自定义组件的故障诊断过程显示

针对导弹控制系统结构复杂,信号线繁多,难以在故障诊断软件设计中实现诊断过程图形化实时显示的问题,提出了一种基于自定义组件开发故障诊断软件的方法.根据导弹控制系统的故障诊断流程及实时显示需要,对其结构进行了分析,抽象出了主要组成元素--信号通道和部件,由此提出了需要定义的相应组件.用Borland C Builder6.0开发环境进行了应用实践,证明使用这种方法可快速开发出能图形化实时显示故障诊断过程的导弹控制系统故障诊断软件,开发出的软件还具有运行稳定、修改升级方便等优点.     

质量矩导弹固定时间二阶滑模控制方法

针对三轴稳定的双滑块质量矩导弹,基于动态系统零点配置原理提出一种快速固定时间二阶滑模控制方法。首先建立具有完整耦合动力学特征的质量矩导弹姿态动力学模型;其次,基于典型动态系统进行零点配置原理分析和收敛时间估计;在此基础上,提出动态过程可调节的固定时间二阶滑模控制方法,并对系统收敛时间的上界进行估计;最后,针对质量矩导弹的仿真校验了设计方法的有效性。     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

基于鲁棒变结构控制方法的非线性导弹自动驾驶仪设计

对一类非线性不确定导弹控制系统,采用自适应方法进行了基于滑模理论的变结构控制器设计。该方案使得采用反演手段产生的微分爆炸问题得到较好的回避,同时构造自适应律,消除了不确定性对系统的影响,最后通过构造Lyapunov函数方法,确保了系统的鲁棒稳定性。文末仿真结果表明了该方案的有效性。     

基于线化稳定性理论的后掠翼边界层内横流稳定性研究

采用Mack方法求解忽略曲率和压缩性的三维线化稳定性方程（Orr-Sommerfeld方程）,针对无限展长后掠翼,计算分析边界层内不同波长横流驻波沿弦向的放大率,确定最不稳定波的波长。计算结果与参考文献中的实验结论和计算结果符合较好,表明该方法能够准确的预测出最不稳定波的波长,可以用来指导横流驻波主导下的后掠翼流动稳定性问题研究。     

低雷诺数条件下微型无人机机翼形状的研究

利用CFD软件FLUENT,通过Spalart-Allmaras模型、低Reynolds和二层模型这3种湍流模型对正八边形机翼平面布局进行绕流分析并与试验数据进行对比,选择了低Reynolds湍流模型对4种微型无人机机翼平面形状的低雷诺数气动特性进行模拟分析,结果表明,矩形布局和反齐默曼布局是微型无人机比较理想的设计选择.