A novel control method for turboshaft engine with variable rotor speed based on the Ngdot estimator through LQG/LTR and rotor predicted torque feedforward

In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed, a cascade PID control method based on the acceleration estimator of gas turbine speed (Ngdot) and rotor predicted torque feedforward is proposed. Firstly, a two-speed Dual Clutch Transmission (DCT) model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed. Then, an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR) is proposed for power turbine speed cascade control. Finally, according to the cascade PID controller based on Ngdot estimator, a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network (MGD-NN) is put forward to compromise the influence of rotor torque interference. The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control, the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%, which possesses faster response, superior dynamic effect and satisfactory robustness performance. The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.     

K8V变稳飞机飞行试验验证系统

介绍了Ｋ８Ｖ变稳飞机飞行试验验证系统的组成及功能,分别阐述了该系统的飞控软件综合验证子系统、机上地面试验数据采集与处理子系统和飞行试验数据处理分析子系统等三部分的组成、工作原理、以及在飞行试验各个阶段的不同特点和作用。通过Ｋ８Ｖ变稳飞机飞行试验的应用,表明该系统能够满足变稳飞机的软件维护、系统验收试飞及后续的应用研究,具有实时,快速,准确,自动化等优点,可为Ｋ８Ｖ变稳飞机应用研究提供重要的支持手段     

动能拦截器变结构自动驾驶仪设计方法研究

介绍了动能拦截器自动驾驶仪回路组成和动力学模型 ,重点研究了动能拦截器自动驾驶仪的变结构控制律设计 ,并进行了原理性的数学仿真计算。数学仿真表明 ,变结构自动驾驶仪具有很好的快速性和很高的姿态控制精度 ,可以满足动能拦截器对姿态控制的要求     

旋转固体火箭发动机随质量变化的姿态运动分析

旋转固体火箭发动机是否稳定主要取决于其微小的侧向角速度是否被耗散或被放大。就发动机内部随燃烧而质量发生变化,且使飞行器整体质心前移的圆柱形装药结构进行姿态动力学分析,得到在几种典型装药形式下侧向角速度随时间的变化情况。结果指出,质量的减小对飞行角速度的变化是有影响的,由于误差等因素所引入的初始侧向角速度也会被逐渐耗散掉。此外,在某些装药形式及燃烧方式下,其侧向角速度在燃烧过程中会以指数规律增加,通过对计算结果的分析,提出了对发动机设计的稳定性要求。     

一种特殊梯度分布的功能梯度矩形板弯曲问题解析解

研究了一种特殊梯度分布功能梯度材料矩形板弯曲问题。假设材料的弹性模量在板厚度方向上呈幂函数分布,泊松比为常数,引入PLEVAKO解,利用分离变量法,导出四边简支功能梯度材料矩形板弯曲问题的解析解。通过算例分析了材料组分变化时,功能梯度板应力和位移的变化规律。结果显示不同梯度分布板结构中的应力、位移的变化规律是不同的,有时甚至差别很大。该方法为发展针对功能梯度材料特点的数值算法和简化理论提供依据。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

旋转状态柔性附件航天器振动及其变结构控制

基于Hamilton变分原理,采用Mindlin厚板理论,研究了旋转状态中心刚体—悬臂厚板振动及其变结构控制问题。采用Hamilton状态空间法,应用弹性波与振动模态理论,确定了Mindlin厚板中的振动模态。针对该模型系统设计了控制器,采用滑模变结构控制理论,实现了对系统实施渐近稳定控制的设计。采用的变结构控制能使系统达到所期望的振动状态,有效地抑制了平板振动。最后,给出了数值模拟结果,讨论了中心刚体—悬臂厚板位移的动力学控制规律。该方法和计算结果可望能在带有柔性附件航天器的动力学控制中得到应用。     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

一种步长为对角阵的正交数据投影算法

针对传统子空间跟踪算法正交性和稳定性差的问题,基于数据投影算法(DPM),提出了一种步长为对角阵的正交DPM算法。算法运算复杂度较低,能提供标准正交的子空间,运行时无累积性误差;采用"自适应"而非固定搜索步长,能更好地匹配子空间的动态收敛速度,可进一步提高收敛速率并具有更佳的跟踪性能。仿真结果证明了新算法的有效性和正确性。