基于多学科综合的MAV鲁棒飞行控制器设计

气动、结构、推进和环境等学科设计参数变化与耦合对微型飞行器(MAV)性能影响明显，MAV飞行控制器设计应考虑这些因素。将MAV多学科模型集成在统一框架下，提出了基于各学科设计参数变化的线性化建模方法，研究了利用μ综合手段进行MAV飞行控制器设计的方法和步骤，并将此方法应用于某MAV纵向控制器的设计与评估中。     

欧洲返回舱CTV气动特性综述

研究分析了欧洲航天局天地往返运输系统之载人飞船返回舱CTV的气动特性，并与第一代联盟号飞船返回舱的气动特性作了对比研究。该返回舱为钝双锥外形，与联盟号飞船返回舱相比，它具有升阻比高、机动性强、稳定性好等特点。本文还对两类返回舱的气动热特性、防热材料重量、飞行弹道及通讯中断问题进行了对比分析研究。     

废气排放塔尾流区随机游动扩散模拟研究

本文对一种建筑结构与形式特异的废气排放源－过江隧道风井塔，进行了如下研究：（１）在环境风洞中通过风井塔后流场的测量，分析给出塔后尾流特征，并进行示踪气体扩散模拟试验和烟云照相；（２）在上述工作基础上，建立一个先进的随机游动扩散模式，模拟尾流区污染物扩散的基本规律，模式计算结果与实验结果吻合较好。建筑物的存在使得地面最大浓度增大３￣４倍，且出现位置离源更近。研究表明，随机游动方法研究对有明显湍流不均     

空气中微细电火花沉积铜合金工艺方法

提出了一种在空气中将工具电极丝黄铜材料沉积到工件上的新工艺方法。实现该方法的基本条件为:(1)工具电极接脉冲电源正极;(2)在空气中放电;(3)窄脉宽配合宽脉间。通过大量实验对微细电火花沉积加工的工艺规律进行了系统深入的研究,得出各主要工艺参数对沉积工艺效果的影响规律。最终以黄铜电极丝为工具电极,在高速钢工件表面上沉积出直径为0.19 mm、高度为7.35 mm的微小圆柱体。利用SEM、能谱分析和X射线衍射及显微硬度测试等方法对沉积物进行分析,得出该沉积物的组织结构、化学成分和硬度等方面的基本性质,为进一步研究三维沉积加工奠定了基础。     

空中受油管的绕流特性研究

空中加油是提高飞机航程、活动半径的重要方法。通过对四种固定受油管的数值模拟,从流动特性的改进方面说明了合适的截面及倾角会降低受油管绕流的压力脉动,进而使噪声降低。     

冲压空气涡轮性能的局部改进升力线算法

将现代螺旋桨的改进升力线算法应用于空气涡轮性能计算，结合冲压空气涡轮结构特性对叶片模化作了局部改进，对一个冲压空气涡轮模型作了计算，与实验结果和改进升力线法的对比表明，局部改进后的叶片环量和诱导速度分布合理，计算精度和宽度有明显改善，与实验符合较好。     

燃烧室头部进气规律对煤粉燃烧效率的影响

用实验方法研究了火焰筒式煤粉燃烧室头部进气规律对燃烧效率的影响。通过对6种结构的头部配气方案的分析比较,得出了煤粉燃烧室合理的头部配气方案,为今后煤粉燃烧室的设计和工作状态的选择提供了重要的实验依据。     

Suggestion for aircraft flying qualities requirements of a short-range air combat mission

Owing to the lack of a direct link with the operations in short-range air combat,conventional aircraft flying qualities criteria are inappropriate to guide the design of a task-tailored flight control law.By applying the mission-oriented flying qualities evaluation approach,various aircraft with different control law parameters are evaluated on a ground-based simulator.This paper compares the evaluation results with several conventional flying qualities criteria,and discusses the appropriate parameter combination to reflect the flying qualities requirements of short-range air combat,The comparison and analysis show that a short-range air combat mission requires a higher minimum short period mode natural frequency and a smaller maximum roll mode time constant,and allows a lower minimum pitch attitude bandwidth and a higher maximum short period mode damp ratio than those of conventional flying qualities criteria.Furthermore,a combination of the pitch attitude bandwidth,the pitch attitude magnitude at the bandwidth frequency,and the pitch attitude transfer function gain can define the flying qualities requirements of short-range air com bat.The new metric can successfully predict the flying quality levels of aircraft in a short-range air combat mission.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

波音737NG飞机大气数据探头自动加温功能测试的替代方法研究

根据波音AMM手册要求,在更换波音737NG飞机上的大气数据系统传感器后,需通过试车测试其自动加温功能。本文研究了波音737NG飞机大气数据系统探头自动加温的工作原理,并提出避免试车的解决方案。