Inertial parameter estimation and control of non-cooperative target with unilateral contact constraint

In this paper, the relative sliding motion between the target and the manipulator’s end-effector is considered and characterized as a unilateral contact constraint. A new possible solution is presented to estimate the inertial parameters of a non-cooperative target while the relative sliding motion exists. First, the detailed analysis of the dynamical model is presented, and a parameter-explicit linear time-varying model is obtained. Then, an extended state observer is constructed based on the new model, which can effectively estimate the unknown inertial parameters of the target when relative sliding motion exists. As the modified reactionless controller requires the knowledge of inertial parameters, a hybrid post-capture control scheme is also established based on the switch law between different controllers. The correctness and efficiency of the proposed algorithm are validated by numerical simulation, which proves a potential framework for the non-cooperative target post-capture operation.     

基于闭环解析解的可重复使用运载器轨迹在线生成方法

The relationships between path constraints such as heating rate, dynamic pressure and aerodynamic load and velocity during entry flight are analyzed in  r-V  plane for an entry vehicle with mediate high lift to drag ratio. Through derivation and integration, a unified formula for path constraints is obtained in  r-V  plane. Based on the unified formula and several characteristics an analytical solution is obtained,and an online trajectory generation method is developed. In the method, the coupled longitudinal and lateral motion is considered, and can make the best use of flight capability and satisfy path constraints. Trajectory generation cases with different flight mission and downranges are tested. Simulation results demonstrate the capability and efficiency of the trajectory planning method in dealing with path constraints.     

资源约束突变的航天器观测快速重调度优化算法

针对航天器对地观测调度中资源约束发生突变的情况,提出了一种基于蚁群算法的启发式重调度算法。首先对重调度过程中的资源约束进行分析,给出了资源约束发生变化的重调度模型。然后,结合原调度优化结果,给出重调度任务集合更新方法,对任务集合进行剪裁。最终,基于最大限度利用原调度方案信息的思想,结合任务集合更新及优先级等启发式信息,给出了一种改进的重调度优化算法。数值计算结果表明,所设计的算法可以快速有效的提高重调度过程的收益。     

考虑等待时间约束的不完美生产系统的产出优化

针对某些生产系统存在等待时间约束及设备劣化引起产品质量损失这2个问题,构建了系统的缓冲区控制和预防性维护的联合优化模型。首先,利用伽马过程对下游瓶颈工作站的劣化过程进行建模,并考虑由于其状态劣化引起的产品质量损失;其次,在此基础上,将工件的到达、中间缓冲区及下游工作站的加工过程视为一排队系统,引入M/G/1/K排队模型分别求解了在制品(WIP)被阻塞和超出等待时间约束的概率;最后,以最大化系统的"有效产出"为目标,对系统的预防性维护和缓冲区控制作了联合优化。数值实例表明:本文所提模型是切实、有效的,对带等待时间约束的生产系统的缓冲区控制、预防性维护以及产出提高具有一定的指导意义。     

基于3RRS-Bricard复合空间捕获系统运动学分析

面向跨尺度、目标多样化的空间捕获任务,融合Bricard和3RRS机构的折展特性和几何特点对复合捕获系统运动学进行了分析。基于捕获系统的自由度和构型特点分析,通过构建Bricard与3RRS间的转换关系实现了捕获系统各机构间的运动学解耦。根据六棱柱模型,引入Bricard虚拟顶点,设计了面向复合空间捕获系统的运动学求解方法。在仿真环境下搭建捕获系统的运动学和动力学模型,并开展针对动态捕获目标的轨迹跟随实验。通过与基于闭环约束的阻尼最小二乘法（DLS）对比,验证了该运动学求解算法的有效性和先进性。实验结果表明,捕获系统可实现平稳的协同控制,运动过程中位置跟随精度优于4 mm,姿态精度优于0.035 rad。     

Preparation of the Biochip experiment on the EXPOSE-R2 mission outside the International Space Station

Biochips might be suited for planetary exploration. Indeed, they present great potential for the search for biomarkers – molecules that are the sign of past or present life in space – thanks to their size (miniaturized devices) and sensitivity. Their detection principle is based on the recognition of a target molecule by affinity receptors fixed on a solid surface. Consequently, one of the main concerns when developing such a system is the behavior of the biological receptors in a space environment. In this paper, we describe the preparation of an experiment planned to be part of the EXPOSE-R2 mission, which will be conducted on the EXPOSE-R facility, outside the International Space Station (ISS), in order to study the resistance of biochip models to space constraints (especially cosmic radiation and thermal cycling). This experiment overcomes the limits of ground tests which do not reproduce exactly the space parameters. Indeed, contrary to ground experiments where constraints are applied individually and in a limited time, the biochip models on the ISS will be exposed to cumulated constraints during several months. Finally, this ISS experiment is a necessary step towards planetary exploration as it will help assessing whether a biochip can be used for future exploration missions.     

多导弹齐射攻击协同制导(英文)

Cooperative guidance problems of multiple missiles are considered in this article. A cooperative guidance scheme, where coordination algorithms and local guidance laws are combined together, is proposed. This scheme actually builds up a hierarchical cooperative guidance architecture, which may provide a general solution to the multimissile cooperative guidance problems. In the case of salvo attacks which require missiles to hit the target simultaneously, both centralized and distributed coordination algorithms are derived based on the impact-time-control guidance （ITCG） law. Numerical simulations are performed to demonstrate the effectiveness of the proposed approaches.     

关于约束分类问题的研究

约束条件的分类对于简化数学规划问题的求解具有重要意义，对于凸函数ｇｉ（ｘ）（ｉ＝１，２，…，ｎ）给出了约束ｇｉ（ｘ）≤０是必要约束或多余约束的充要条件，对于一般约束，定义了约束相关矩阵，给出了约束是必要的或多余的充要条件，对相对多余约束给出了分类。     

满应力优化设计方法的集约几何规划法

将集约几何规划法应用在连续梁和刚架的主体优化设计中，计算了两跨连续梁和门式钢框架，均得到满意结果。     

复合材料层合锥壳非线性稳定性的有限元分析

本文根据稳定性分析的前屈曲完全理论和修正型的Ｈａｈｎ－Ｔｓａｉ非线性本构关系，采用有限元法分析了复合材料层合回转壳的非线性稳定性，讨论了屈曲产壳体法向与面内支承条件和复合材料的横向和剪切非线性性能对壳体结构总体稳定性的影响，为工程结构设计者们提供了一些有益的参考意见。