用阻抗均匀过渡法研制高分辨力换能器

分辨力是超声探伤用换能器的关键指标,本文从理论和实验两方面探讨了如何利用机械阻抗均匀过渡法提高换能器分辨力的有关问题。     

时间代价启发式多月基装备协同任务规划方法

针对月球科研站构建中优化整体任务用时的需求,提出时间代价启发式多月基装备协同任务规划方法。面向月球科研站构建过程中的原位和路径任务,构建双类型任务关系图,并提出多位置转移时间代价启发式策略引导此图的搜索方向,使规划器沿局部最短耗时任务路径逐个处理任务,降低装备路径转移的时间代价;提出时间代价启发式装备选择策略,从而均衡月基装备任务负载,缩短装备工作时长。最后,以包含资源开采、物料运输、设施建设等任务的月球科研站构建场景为例,对规划算法进行仿真验证。结果表明,此算法能够生成满足复杂约束的多装备协同规划序列。与传统规划方法相比,本文方法得到的月基装备任务序列冗余路径少、任务用时短,可实现多装备在多任务中的高效分时复用。     

Experimental investigation of boundary layer transition over a delta wing at Mach number 6

An experimental study on the boundary layer transition over a delta wing was carried out at Mach number 6 in a quiet wind tunnel. The Nano-tracer-based Planar Laser Scattering(NPLS) and Temperature-Sensitive Paints(TSP) techniques were used to measure the fine flow field structure and the wall Stanton number of the delta wing. The influence of factors such as the angle of attack and the Reynolds number was studied. The following results were obtained. The boundary layer transition between the le...     

适用于深空探测器的时间线转移路标启发式规划方法

针对深空探测器各子系统状态并行及约束耦合的特点,设计了最大转移代价计算方法,并在此基础上提出了时间线路标提取方法。然后,针对路标集合重复计算耗时长的问题,提出了路标增量式搜索算法实现路标集合动态快速更新,并进一步结合最大目标节点筛选策略提出了时间线转移路标启发式规划方法。仿真结果表明,时间线转移路标启发式规划方法能够有效减少冗余规划步数,提高规划求解效率。     

调制电子束弛豫长度对哨声波辐射的影响

在发射调制电子束的主动空间试验中,电子束与背景等离子体的线性和非线性相互作用将产生哨声波辐射.影响辐射特性的因素很多,调制电子束的弛豫长度是其中一个重要因素.本文研究了呈指数衰减的调制电子束弛豫长度对电子束产生的哨声波辐射特性的影响.结果表明,当电子束弛豫长度与背景等离子体非均匀特征尺度相当时,有利于提高调制电子束产生的波辐射强度.     

A three-equation transition model with mechanical considerations

A three-equation transition model based on the transition V-model is proposed for subsonic flows in this study. Considering the mechanical approximation of the generation process of the pre-transitional vorticities, the value of laminar Reynolds shear stress related to the mean shear deformation was calculated in the original transition V-model. Then a new transition model, named V-SA model, was proposed, which considered the phenomenological process of transition and presented great results for flows with and without pressure gradient. It is well-known that the baseline Shear Stress Transport (SST) turbulence model shows excellent performance of accuracy and robustness in plentiful flow cases, but it is important to predict boundary layer transition. The current model (V-SST) successfully couples the V-model to the SST turbulence model by introducing the effective turbulent viscosity and additional correction terms into the transport equations. A thorough evaluation of its ability to predict transition features is performed versus the well-documented flat plate of ERCOFTAC, including T3A and T3B without pressure gradient, T3L2 and T3L3 with semi-circular leading edge, the three-dimensional 6:1 prolate-spheroid under two angles of attack, and the NLR-7301 airfoil under different Mach numbers. Numerical results show that the current model has an attractive and superior performance in the simulation of boundary layer transition processes     

Physics-based model for boundary layer transition prediction in a wide speed range

A new physics-based model employing three transport equations is developed for the simulation of boundary layer transitions in a wide speed range. The laminar kinetic energy is used to represent pretransitional streamwise velocity fluctuations, taking account of different instability modes. The fluctuation velocity components normal to the streamwise direction are modeled by another transport equation. Transition is triggered automatically with the development of the pretransitional velocity fluctuations. In the fully turbulent region, the model reverts to the k-ω turbulence model. Different test cases, including subsonic, supersonic and hypersonic flows around flat plates, airfoils and straight cones, are numerically simulated to validate the performance of the model. The results demonstrate the excellent predictive capabilities of the model in different paths of transition. The model can serve as a basis for the extension of additional transition mechanisms, such as rotation and curvature effects, roughness-induced transition and crossflow-induced transition.     

热交换对喷气发动机过渡过程影响分析

给出一种用于估算气流与零部件间热交换对过渡过程影响的方法。利用该方法计算了某双轴涡扇发动机在加速过程中各主要零部件与气流间的热交换随加速时间的变化，各部件热交换对推力响应的影响；计算和分析了该发动机在相同供油规律下“冷”和“热”两种加速过程，估算了典型部件换热面积和质量对加速性的影响。计算结果的分析表明：高温部件与气流的热交换对喷气发动机的过渡过程有不容忽视的影响；相同供油规律下由于热交换使“冷”和“热”加速过程的差异十分显著，“冷”加速过程允许采用补偿供油改善加速性；零部件换热面积和质量的估算精度对加速性有一定的影响，但不显著。     

用曲面过渡法成形高锥形件

介绍了用曲面过渡法成形高锥形件的原理及确定过渡形状的方法。采用该方法成形的零件，表面光滑、无压痕。