A novel system parameters design and performance analysis method for Distributed Satellite-borne SAR system

As a promising new technology emerged in recent years, the Distributed Satellite-borne SAR (DSS) system with Interferometric Synthetic Aperture Radar (InSAR) imaging capability has been recognized by the remote sensing community as an integrated part of the spaceborne earth observation system. However, most researches on DSS were focused on individual aspects of system design/analysis and data processing, while few studies have been dedicated to establishing a standard methodological framework for universal DSS system design. Aiming at this problem, the topics of DSS system error analysis and design method are investigated in this paper. Firstly, a rigorous error propagation model of height measurement is theoretically derived from the DSS InSAR imaging geometry, and the impact of each error sources in this model on the height measurement accuracy is analyzed individually. In particular, the baseline length and its measurement error in the InSAR imaging plane are identified as the dominant factors. Second, a new method for DSS system design is proposed based on our analyses with the error propagation model. This method consists of two important phases, namely collaboration design and monostatic design. The major objective of collaboration design is to determine the configuration and parameters for the coordination between satellites in the DSS system. Afterwards, the key parameters for single satellite and the payload are determined by the monostatic design. Thirdly, a system performance analysis method is developed to comprehensively evaluate the performance of the pre-designed DSS system. In the next section, a typical example of DSS system design is given to demonstrate the effectiveness of the proposed system design and analysis methods. The target DSS system has the same goal and hardware configuration as the TanDEM-X mission. Finally, the conclusion is drawn with our major findings are presented.     

Self-similar flow of a rotating dusty gas behind the shock wave with increasing energy, conduction and radiation heat flux

A self-similar solution is obtained for one dimensional adiabatic flow behind a cylindrical shock wave propagating in a rotating dusty gas in presence of heat conduction and radiation heat flux with increasing energy. The dusty gas is assumed to be a mixture of non-ideal (or perfect) gas and small solid particles, in which solid particles are continuously distributed. It is assumed that the equilibrium flow-condition is maintained and variable energy input is continuously supplied by the piston (or inner expanding surface). The heat conduction is expressed in terms of Fourier’s law and the radiation is considered to be of the diffusion type for an optically thick grey gas model. The thermal conductivity K and the absorption coefficient α_R are assumed to vary with temperature only. In order to obtain the similarity solutions the initial density of the ambient medium is assumed to be constant and the angular velocity of the ambient medium is assumed to be decreasing as the distance from the axis increases. The effects of the variation of the heat transfer parameters and non-idealness of the gas in the mixture are investigated. The effects of an increase in (i) the mass concentration of solid particles in the mixture and (ii) the ratio of the density of solid particles to the initial density of the gas on the flow variables are also investigated.     

增强RRAM可靠性的热通量压缩算法

为提高阻变存储器(RRAM)的可靠性,研究了RRAM中的热串扰问题,提出了一种热通量压缩(TFC)算法,通过在RRAM读写电路之前加入TFC算法,降低在RRAM中产生的焦耳热,从而减弱RRAM中的热串扰问题,提高RRAM的可靠性。TFC算法通过分析计算写入数据流产生的真实焦耳热热量进而判断是否对写入数据流进行翻转编码,即TFC算法会在原始写入数据流和翻转编码数据流二者中选择热通量较小者通过算法层,从而达到减小RRAM存储器中焦耳热热量的目的。理论分析和仿真结果表明:以字节为单位数据块条件下TFC算法平均可降低30%以上的写入焦耳热,阻变单元的保持时间估值平均增加了35%以上。      

涡轮叶冠换热特性实验与数值模拟

利用数值模拟及实验方法对涡轮叶冠间隙流场换热特性进行了研究,分析静止状态下叶尖泄漏流雷诺数、前后孔岀流比、叶尖间隙等参数对叶冠的表面传热系数的影响.结果表明:叶冠转速的变化对表面传热系数影响较小;随着泄漏流雷诺数的增加,叶冠的平均表面传热系数增大;平均表面传热系数随前、后孔岀流比增大而增大,其中前孔出流比的影响较为明显;叶尖间隙减小,平均表面传热系数增大,并且随叶尖间隙的减小,增长越来越快.将计算与实验结果进行了比较,吻合良好,误差小于10%.      

基于网格细化技术的地球-火星转移轨道优化

文章从细化效率、易用性和适应性等角度对基于数据压缩原理的网格细化算法进行改进,与基于局部配点法开发的通用轨迹优化方法（考虑非线性规划的规范化处理、稀疏特性和数值微分算法）相结合,构建出一种非光滑轨迹优化方法。对地球—火星转移轨道进行了优化,结果表明：所述方法能够高精度、快速求解地球—火星转移轨道优化问题,能够在轨道变化剧烈区域加密网格,在轨道变化平坦区域采用较稀的网格,具有较好的适应性和在线优化的潜力;采用控制变量作为网格细化函数即可捕捉到状态变量的剧烈变化;对于地球—火星转移轨道优化问题,推力方向角定义在[0°,360°)比定义在[-180°,180°)更利于数值优化。     

大型反射面天线温度分布规律及变形影响分析

针对高频段大型反射面天线对电性能的高要求,必须降低太阳热辐射对天线的影响。先计算一天中太阳入射角度的变化规律,再基于I\|DEAS软件仿真,得到一天中各时刻天线反射面上的温度、热应力场、热变形分布,然后针对阴影对天线结构的重要影响,以“分点分段”的形式给出不同时刻温度在反射面上的分布及其影响程度和规律,为工程人员进行天线的温度补偿和结构优化提供了依据。     

多斜孔壁与机加环气膜冷却燃烧室面换热特性数值研究

数值研究了在燃烧室实际工作条件下,多斜孔壁冷却燃烧室和机加环气膜冷却燃烧室的流动、换热特性,比较分析了内、外壁温度场以及冷却流量的变化.研究发现,采用多斜孔壁后,壁面冷却效果得到强化,相比机加环气膜冷却燃烧室,燃烧室前段壁温略有升高,而后段受到气膜冷却效果增强的影响,壁面温度有所降低,壁面温度梯度明显减小.流量系数明显减小,冷却空气量降低23%,用于组织燃烧用气量增加.多斜孔壁冷却技术可以为高温升燃烧室的发展提供有效的冷却技术.      

气动加热下光学窗口传热特性的数值模拟

针对气动加热条件下光学窗口辐射导热耦合传热开展研究,以了解光学窗口的热辐射发射规律及热防护性能。采用有限体积法、蒙特卡罗法、谱带模型建立了具有镜反射界面的光学窗口辐射传输及辐射导热耦合传热计算模型,对具有两层SiO2玻璃的光学窗口传热特性进行了模拟。结果表明处于高温区玻璃向外发射热辐射,低温区玻璃吸收热辐射;除了加热面附近外的玻璃区域,辐射热流密度远大于导热热流密度,在2.9～4.2μm谱带内的辐射热流密度大于0.4～2.9μm谱带内的;在0.4～2.9μm谱带内,可见光波长内的出射辐射热流密度最小,中红外波长范围内出射辐射热流密度最大。在光学窗口总厚度一定的情况下,降低玻璃层厚度和玻璃夹层气体热导率能够有效降低光学窗口非加热面稳态温度。     

舰载机惯导系统大方位失准角传递对准建模与仿真

为解决舰载机惯导系统在大方位失准角条件下的初始对准问题,建立舰载机惯导系统传递对准误差模型。该模型通过载舰坐标系与舰载机标称坐标系之间方向余弦矩阵,将载舰坐标系与实际舰载机坐标系之间的大方位失准角问题．转化为舰载机标称坐标系与实际舰载机坐标系间的小方位失准角问题,建立了舰载机传递对准的线性化数学模型,并采用“速度”匹配法建立了传递对准滤波器模型,利用轨迹发生器对模型进行仿真验证。     

利用上游斜坡改善气膜冷却效率的数值研究

为了获得气膜孔上游放置斜坡对气膜冷却效率的影响规律,采用数值模拟方法研究了斜坡的台阶高度分别为0.3D,0.5D,0.75D,1.0D和1.5D时不同吹风比下的流动过程和冷却效率分布情况,并与常规气膜孔冷却结构形式进行对比,以揭示斜坡对气膜冷却效率改善作用的影响机理。研究表明,在气膜孔上游设置斜坡,延缓了主流通过反向涡对对冷却气流的掺混作用,反向涡对强度减弱,冷却气流出流后的贴壁效果更好,提高了气膜冷却效率,随着吹风比的增加,斜坡高度较高时无论是在气膜孔中心线处还是在两气膜孔之间区域的冷却效率值都得到大幅度的提高。