旋转蛇形通道内冷气流动和换热的数值模拟

对于具有近真实发动机参数的涡轮叶片蛇形内冷通道,数值模拟了旋转状态下光滑、前后缘带肋及环肋结构的内流场和温度场分布,对比分析了其流动和换热特性。结果表明,带肋通道各面换热均明显好于光滑面通道;旋转对各通道进气段的影响比出气段明显;哥氏力在环肋通道中产生了最为强烈的截面二次流;光滑通道出气段换热受弯管效应的影响最为显著。      

采用二维贝叶斯方法求解旋转盘腔导热反问题

为了研究压气机旋转盘腔换热特性,实现准确求解转盘表面传热系数,引入二维贝叶斯方法,此方法采用先验分布优化测温误差,并且更加符合转盘的二维特性。通过加入噪声的模拟数据验证方法的可行性,结果表明无测温误差时方法的平均误差是3.2%,有测温误差时方法的平均误差是10.6%,并分析了误差来源。通过与已有实验结果对比,发现方法更适用于计算转盘迎风面与背风面传热差异较大时的表面传热系数,平均相对误差为9.6%,满足实际工程精度的要求。通过改变盘面温度测点数量,发现测点增加会提升计算精度,并采用统计抽样理论分析原因,发现在可接受误差为10%时,所需要的测点数量比较合理。     

结合TEC的泵驱两相温控系统的空间应用

为满足天舟一号货运飞船(T Z1)蒸发冷凝科学实验的控温需求，采用半导体制冷片(TEC)和泵驱两相回路结合的控温系统实现了冷凝台-5~40 ℃(±0.2 ℃)的控温要求。对TEC和平行流换热器进行了研究，结果表明该系统能够满足环境温度等于30 ℃工况下的制冷和散热要求。测试结果表明，平行流换热器在地面和在轨的换热相当，说明重力的影响几乎可以忽略。     

Parallel algorithm and its convergence of spatial domain decomposition of discrete ordinates method for solving radiation heat transfer problem

To improve the computational efficiency and hold calculation accuracy at the same time,we study the parallel computation for radiation heat transfer. In this paper, the discrete ordinates method(DOM) and the spatial domain decomposition parallelization(DDP) are combined by message passing interface(MPI) language. The DDP–DOM computation of the radiation heat transfer within the rectangular furnace is described. When the result of DDP–DOM along one-dimensional direction is compared with that along multi-dimensional directions, it is found that the result of the latter one has higher precision without considering the medium scattering. Meanwhile, an in-depth study of the convergence of DDP–DOM for radiation heat transfer is made. Analyzing the cause of the weak convergence, we relate the total number of iteration steps when the convergence is obtained to the number of sub-domains. When we decompose the spatial domain along one-,two- and three-dimensional directions, different linear relationships between the number of total iteration steps and the number of sub-domains will be possessed separately, then several equations are developed to show the relationships. Using the equations, some phenomena in DDP–DOM can be made clear easily. At the same time, the correctness of the equations is verified.     

Effect of blade sweep on inlet flow in axial compressor cascades

This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general understanding of the inlet flow field that is induced by sweep.A computational fluid dynamics(CFD) package was used to simulate the cascades and obtain the required three-dimensional(3D) flow parameters. A circumferentially averaged method was introduced which provided the circumferential fluctuation(CF) terms in the momentum equation.A program for data reduction was conducted to obtain a circumferentially averaged flow field.The influences of the inlet flow fields of the cascades were studied and spanwise distributions of each term in the momentum equation were analyzed. The results indicate that blade sweep does affect inlet radial equilibrium. The characteristic of radial fluid transfer is changed and thus influencing the axial velocity distributions. The inlet flow field varies mainly due to the combined effect of the radial pressure gradient and the CF component. The axial velocity varies consistently with the incidence variation induced by the sweep, as observed in the previous literature. In addition, factors that might influence the radial equilibrium such as blade camber angles, solidity and the effect of the distance from the leading edge are also taken into consideration and comparatively analyzed.     

三阶HWCNS的构造及其在高超声速流动中的应用

对网格质量要求高、计算稳定性差和计算效率低是制约高阶精度格式应用于高超声速复杂流动模拟的重要因素。针对这些问题,发展了三阶精度的混合节点半节点加权紧致非线性格式(HWCNS3),改进其光滑测试因子和非线性权得到了HWCNS3-OP,并给出了它们的频谱特性。利用Lax和Osher-Shu算例测试了格式对间断和高频波的捕捉能力;通过钝锥和航天飞机的高超声速绕流算例,考察了HWCNS3-OP在真实流动模拟中热流和气动力的预测精度及其计算效率。研究结果表明:HWCNS3-OP具有较高的分辨率和良好的间断捕捉能力,高频波捕捉能力相对HWCNS3提高了约3倍,相对守恒律的单调迎风中心格式(MUSCL)提高了约4倍;HWCNS3-OP计算稳定性较好,计算效率相对五阶HWCNS提高了2~3倍,HWCNS3-OP是一种较适合高超声速复杂流动模拟的高阶精度格式。     

Tangent-impulse transfer from elliptic orbit to an excess velocity vector

The two-body orbital transfer problem from an elliptic parking orbit to an excess veloc-ity vector with the tangent impulse is studied. The direction of the impulse is constrained to be aligned with the velocity vector, then speed changes are enough to nullify the relative velocity. First, if one tangent impulse is used, the transfer orbit is obtained by solving a single-variable function about the true anomaly of the initial orbit. For the initial circular orbit, the closed-form solution is derived. For the initial elliptic orbit, the discontinuous point is solved, then the initial true anomaly is obtained by a numerical iterative approach; moreover, an alternative method is proposed to avoid the singularity. There is only one solution for one-tangent-impulse escape trajectory. Then, based on the one-tangent-impulse solution, the minimum-energy multi-tangent-impulse escape trajectory is obtained by a numerical optimization algorithm, e.g., the genetic method. Finally, several examples are provided to validate the proposed method. The numerical results show that the minimum-energy multi-tangent-impulse escape trajectory is the same as the one-tangent-impulse trajectory.     

环境压力对双组分运动液滴蒸发特征影响的理论研究

为获得亚临界条件下,环境压力对双组分运动液滴蒸发特性的影响规律,基于多组分液滴蒸发模型,对癸烷—乙醇二元混合液滴在高温氮气环境下的运动蒸发过程开展模型研究。通过模型计算,获得了液滴内部浓度分布、温度分布和液滴速度随时间的变化;分析了在环境压力0.1MPa和2MPa下,不同浓度液滴温度、尺寸及表面乙醇浓度的变化特征。结果表明:双组分液滴运动蒸发过程中,内部存在显著浓度和温度梯度,传热扩散快于传质扩散。常压环境下,液滴温度经历瞬态加热和平衡蒸发两个阶段,而高压环境下,液滴温度逐渐升高至接近环境温度。双组分液滴蒸发过程中由于组分浓度随时间变化,其无量纲尺寸随时间变化明显偏离"d 2理论";环境压力越高,液滴运动的贯穿距离越短,蒸发速率越慢。乙醇浓度对液滴蒸发速率的影响有两方面:蒸发前期,乙醇浓度越高,液滴蒸发速率越快;而蒸发后期,乙醇浓度越高,液滴蒸发速率反而越慢。     

热处理对AZ80镁合金疲劳性能的影响

通过对AZ80镁合金进行总应变幅控制下的室温低周疲劳实验,研究其在热锻、时效态(T5)、固溶时效态(T6)三种不同热处理状态下的循环应力响应、疲劳寿命和循环应力-应变行为。结果表明:在三种不同的热处理制度下,AZ80镁合金大体上都表现为循环应变硬化现象;此外,AZ80镁合金的应变疲劳寿命与塑性应变幅、弹性应变幅之间的关系分别服从Coffin-Manson和Basquin关系式。随着外加总应变幅的不断增大,其疲劳寿命减少。在0.3%的最小外加总应变幅下,AZ80热锻态的疲劳寿命最长;在0.9%的最大外加总应变幅下,AZ80-T5的疲劳寿命最长,而热锻态最短。此外,对疲劳断口形貌的观察结果表明,疲劳裂纹萌生于疲劳试样表面,并以穿晶方式扩展。     

主子惯导坐标系失调动态估计补偿方法研究

本文研究了船体静态变形角、动态变形角引起的主子惯导坐标系失调角动态补偿方法。研究表明：速度加姿态匹配能够在线估计补偿船体静态变形引起的主子惯导坐标系失调角,角速度匹配传递对准方法能够在线估计补偿船体静态变形、动态变形引起的主子惯导坐标系失调角,两种匹配传递对准方法适用条件均受海况环境影响。