A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

基于MSP430点光源跟踪系统设计

提出了一种基于MSP430的点光源跟踪的具体设计方案,并对设计方案的硬件组成、程序设计、调试进行了介绍,实验证明,所设计的光源自跟踪系统有较强的适应能力,反应迅速,灵活性大。     

飞机大部件自动对接同步调姿方法

提出了飞机大部件自动对接同步调姿方法,实现了大部件调姿基准点的连续自动跟踪测量和位姿连续调整.在此基础上开发了集测量场构建、大部件位姿解算和调整等功能于一体的大部件自动对接集成控制软件,并在ARJ21飞机翼身自动对接现场进行了应用试验,结果证明该方法能有效完成飞机翼身自动对接过程,提高测量和对接效率.     

基于FPGA的DDR2缓存控制器在 无线链路图像跟踪系统中的应用

图像跟踪系统是机载光电吊舱的重要组成部分,其对目标捕捉的成功率直接决定了机载光电吊舱的性能.而作用于机载光电吊舱与地面站之间的无线链路系统,有着不可消除的的延时特性,这极大地降低了目标捕捉成功率.本文设计了一种基于FPGA的DDR2缓存控制器,通过缓存控制器可以轻松实现高清视频图像的快速存储和调用,从而实现图像跟踪算法对无线链路延时的补偿.该缓存控制器成功应用于某型机载光电吊舱图像跟踪系统,有效消除了无线链路延时的影响,提高了图像跟踪系统对目标捕捉的成功率.     

基于强跟踪EKF的组合导航系统故障检测方法

针对大方位失准角的机载SINS/GPS组合导航系统,为保证在高动态环境下实现高精度、高可靠的导航,利用强跟踪EKF滤波残差设计了一种基于残差统计特性的坏值检测算法,对导航信息进行估计和跟踪.仿真结果表明,该算法能够实时检测出GPS量测信息中的坏值信息,隔离后可显著提高组合导航精度,具有较高的可靠性、出色的容错能力和重要的工程应用价值.     

多飞行器再入段时间协同弹道规划方法

提出了一种多飞行器再入段时间协同弹道规划方法。首先,在纵向平面内规划满足航程与终端约束的纵向标称轨迹。随后,在采用轨迹跟踪律跟踪纵向标称轨迹的同时,运用考虑初始横侧向状态的多边界航向偏差角走廊策略控制飞行器的横侧向机动,以满足到达时间约束与终端约束,进而实现单枚飞行器到达时间约束下的轨迹规划。在此基础上,完成了飞行器的到达时间分布与飞行能力分析,给出了最小与最大到达时间的分析计算方法,并根据多飞行器协同再入的任务需求完成了协同飞行时间决策。最后,多飞行器协同再入与扰动条件下的仿真结果表明,该方法能够规划出满足到达时间与终端约束的协同再入轨迹,具备良好的计算精度与鲁棒性。     

集成式随动装置目标引导信息动态校准方法研究

光电对抗系统在机动状态下搜索和跟踪目标时，必须用位置陀螺代替码盘来确定目标方位角。但是，由于搜索轴陀螺存在漂移和累积误差，导致跟踪转台按照引导信息调转到位后目标无法进入跟踪视场，而且陀螺的漂移和累积误差是随时间和温度非线性变化的，很难直接进行修正。为了解决这个问题，提出了一种对引导信息进行间接动态校准的方法。     

Method of virtual trajectories for the design of gravity assisted missions

A method of virtual trajectories is proposed for the design of multiple gravity assist trajectories. The method comprises two principal stages. First, for a chosen planetary sequence, a database of virtual trajectories is tabulated. Then the database screening and refinement are performed. The design of trajectory to Jupiter is presented.     

Reachable domain of spacecraft with a single tangent impulse considering trajectory safety

The reachable domain of the two-body transfer orbit with a single upper-bounded tangent impulse is studied. Three cases are analyzed for either the magnitude of the tangent impulse or the initial impulse point being free, or both being free. For a fixed impulse magnitude and a free initial impulse point, the initial orbit is proved to be one of the envelopes of the reachable domain. Moreover, the trajectory safety for the transfer orbit requires a lower bound on the perigee altitude and an upper bound on the apogee altitude. Then the ranges of the impulse magnitude and the initial true anomaly can be obtained by solving quadratic and cubic inequalities, respectively. If both constraints are required for an arbitrary impulse point, the range of the impulse magnitude is obtained with impulses at the perigee and the apogee. Several numerical examples with different eccentricities are provided to show the geometry of the reachable domain and to verify the proposed method.     

对某装备任务系统软件故障的研究

通过对任务系统软件故障进行定位和分析，提出了基于互斥信号量对获取数据进行现场保护及在任务管理区增加对时间的容错处理的解决措施，并对其进行了分析和验证。