风洞试验中风剖面的模拟及近流场特性分析

首先简单介绍了日本东京工艺大学风工程研究中心新建的开环流低速边界层风洞中风剖面模拟的试验情况.基于试验结果,采用被广泛应用的三角尖劈加上布置粗糙元的方法,成功地模拟出日本建筑学会定义的四类不同场地对应的风剖面.通过对试验数据的比较分析,就所采用的立方体粗糙元及三角尖劈对最终模拟得到的风剖面特性的影响进行了比较分析.其次,对风剖面模拟及特性判定中的几个重要问题,如三角尖劈的形状优化、风速功率谱的一致性、积分尺度的分析方法等进行了分析.最后,基于以上分析,对在边界层风洞中模拟预定的风剖面提出几点参考意见.     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

含滑行时间约束的真空段弹道设计研究

由于动力系统及测控资源的约束,工程中存在着末级两次点火但滑行时间受限的运载火箭真空段弹道设计问题。基于线性引力场的假设,引入含滑行时间约束的切换条件,从而将含固定滑行时长的弹道优化问题转换成对两点边值问题的迭代求解和对运动方程的积分,并通过多个算例仿真验证了该方法的正确性和有效性。同时,研究了迭代过程中滑行段不同弹道预报方法对弹道设计的影响,结果显示较高的预报精度可以获得更优的弹道设计结果。该方法提供了一种新的弹道设计思路,在总体方案论证或初步设计阶段可以替代传统设计方法,以有效提升弹道设计效率,优化火箭方案。     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

燃气发生器结构对燃烧性能的影响

为了确定最佳的燃气发生器结构,对不同结构的燃气发生器进行了对比试验,考察了喷嘴尺寸、燃烧室长度、燃烧室构型等因素对燃气发生器燃烧性能的影响.研究结果表明:在一定范围内增大喷嘴尺寸,燃烧性能基本不受影响,但却可以缩短燃气发生器的点火延迟时间,并且增大流量调节范围;增加燃烧室长度可以明显的提高燃烧效率;燃烧室的构型对燃烧性能有很大影响,收缩-扩张型着火段影响了燃烧过程,降低了燃烧效率,燃气发生器设计不宜采用这种构型.      

定容燃烧弹实验系统及C7燃料火焰速度测量

设计并搭建了适用于测量高温、高压条件下层流火焰传播速度的定容燃烧弹实验系统。详细介绍了定容燃烧弹实验系统的主要子系统的构成和功能,并阐述实验数据处理方法。测量初始温度为400K、压力为0.1MPa和0.3MPa,C7燃料(甲苯、甲基环己烷、正庚烷)/空气层流火焰传播速度,并与现有文献结果进行了对比。结果表明:该定容燃烧弹实验系统具有较高的可靠性,不仅能够准确测量较高初始温度、不同初始压力条件下燃料/空气的层流火焰传播速度,而且能够拓宽测量火焰传播速度当量比的范围。      

针栓式喷注器锥形液膜破碎特性试验

采用高速摄影获得了针栓式喷注器在不同喷注压降和结构参数下的表面波破碎图像,测量了锥形液膜的破碎长度和破碎时间,研究了变工况时液膜破碎长度和破碎时间的变化规律.试验结果表明:在喷注压降不变的条件下,针栓式喷注器能够实现流量的线性调节.针栓式喷注器设计时,在合理的推进剂动量比范围内,狭缝宽度应尽量取小.液膜在低工况时破碎得更快.液膜破碎长度和破碎时间均随喷注压降的增加而减小.