火星探测直接转移轨道精确求解研究

针对火星探测直接转移轨道精确求解问题, 提出了一种快速微分修正算法. 基于二体模型建立控制参数和目标参数偏差关系的数学模型, 并由此求解系统的偏导数矩阵; 采用B平面参数作为中间变量, 对算法进行两层迭代设计, 有效地减少了求解过程中的积分运算次数. 以2018年火星探测机会为例对算法进行了验证, 仿真结果表明, 利用圆锥曲线拼接法得到的轨道初值, 求解一条标准轨道只需6~9次积分迭代. 通过STK对计算结果进行了对比和验证.      

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

基于本体映射的产品概念设计方案生成新方法

将本体与本体映射引入产品概念设计方案生成领域,提出了一种基于本体映射的产品概念设计方案生成新方法,有助于解决传统概念设计方案生成算法中由于知识描述不一致而导致的产品设计知识重用困难,以及设计方案生成准确性低的问题.该方法使用本体知识表示方法建立产品设计知识库;使用本体映射算法自动地搜索产品设计知识库中符合设计需求的产品概念设计方案.通过起重机起升机构驱动装置设计实例,验证了基于本体映射的产品概念设计方案生成新方法的正确性和有效性.     

LALR(1)分析器快速生成

根据LR(0)自动机的构造理论及Deremer和Pennello的LALR(1)向前看符号集计算公式,提出求解公式中的lookback关系和includes关系的高效算法. 研究过程表明,LR(0)项目集闭包计算和项目集的查找是LR(0)分析器构造过程中的主要性能瓶颈.对这两个计算过程给出了高效的数据结构和算法设计,实现了LALR(1)分析器的快速生成.系统实现及实验数据表明,LALR(1)分析器的生成速度超过了自由软件基金会的LALR(1)分析器生成器Bison.      

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use

Ceramics can keep their mechanical characteristics up to 2 000℃ or higher.In this paper,A model to predict ultimate strength of continuous fiber-reinforced brittle matrix composites is developed.A statistical theory for the strength of a uni-axially fiber-reinforced brittle matrix composite is presented.Also a semi-empirical frictional heating method for estimating in-situ interfacial shear in fiber-reinforced ceramic matrix composites was improved.Local uneven fiber packing variation as well as uneven micro-damage during fatigue can be expected to have effects on the composites:generation of frictional heating,thermal gradients,and residual stresses around local fiber breaks.This study examined those engineering interests by the finite element method.      

新型混合励磁电机技术研究与进展

混合励磁电机是对传统单一励磁方式电机的发展,力求综合永磁电机和电励磁电机的优势和特点,有利于减少稀土永磁体用量、拓宽永磁电机调速及调压范围,在航空电源、新能源发电与驱动系统等领域有重要应用前景。本文从励磁结构和磁路原理两个角度对混合励磁电机进行分类和阐述,系统总结了提出的新型转子磁分路混合励磁电机及并列式混合励磁电机的结构原理与运行特点,论述了基于转子磁分路机理发展的混合励磁同步电机不同结构拓扑及其原理,给出了发电/电动运行控制的基本策略与方法。新型混合励磁结构拓扑及控制技术的研究为丰富和发展混合励磁电机技术提供了理论参考与实践指导。     

面向非合作目标抓捕的机械臂轨迹规划方法

文章针对非合作目标抓捕问题设计了基于误差反馈系数的机械臂轨迹规划算法.考虑到空间机械臂在轨服务要求,采用反作用零空间方法来规划机械臂运动轨迹以实现机械臂与航天器之间的协调运动.为避免在规划起始阶段位姿误差较大可能导致机械臂关节速度过大的问题,引入了位姿误差反馈系数.为对空间机械臂抓捕非合作目标的轨迹规划技术进行验证,搭建了地面半物理仿真系统.试验结果表明,通过合理选择位姿误差反馈系数,设计的轨迹规划算法能够使固定基座机械臂末端执行器以较为均匀的速度逼近非合作目标,并能以较高精度实现对非合作目标的抓捕.该试验可以为空间机械臂抓捕非合作目标的轨迹规划提供参考.     

Energy-optimal trajectory planning for solar-powered aircraft using soft actor-critic

High-Altitude Long-Endurance(HALE) solar-powered Unmanned Aircraft Vehicles(UAVs) can utilize solar energy as power source and maintain extremely long cruise endurance,which has attracted extensive attentions from researchers. Trajectory optimization is a promising way to achieve superior flight time because of the finite solar energy absorbed in a day. In this work,a method of trajectory optimization and guidance for HALE solar-powered aircraft based on a Reinforcement Learning(RL) framework is...