叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

面向非合作目标抓捕的机械臂轨迹规划方法

文章针对非合作目标抓捕问题设计了基于误差反馈系数的机械臂轨迹规划算法.考虑到空间机械臂在轨服务要求,采用反作用零空间方法来规划机械臂运动轨迹以实现机械臂与航天器之间的协调运动.为避免在规划起始阶段位姿误差较大可能导致机械臂关节速度过大的问题,引入了位姿误差反馈系数.为对空间机械臂抓捕非合作目标的轨迹规划技术进行验证,搭建了地面半物理仿真系统.试验结果表明,通过合理选择位姿误差反馈系数,设计的轨迹规划算法能够使固定基座机械臂末端执行器以较为均匀的速度逼近非合作目标,并能以较高精度实现对非合作目标的抓捕.该试验可以为空间机械臂抓捕非合作目标的轨迹规划提供参考.     

Automatic differentiation based discrete adjoint method for aerodynamic design optimization on unstructured meshes

A systematic methodology for formulating, implementing, solving and verifying discrete adjoint of the compressible Reynolds-averaged Navier-Stokes (RANS) equations for aerodynamic design optimization on unstructured meshes is proposed. First, a general adjoint formulation is con-structed for the entire optimization problem, including parameterization, mesh deformation, flow solution and computation of the objective function, which is followed by detailed formulations of matrix-vector products arising in the adjoint model. According to this formulation, procedural components of implementing the required matrix-vector products are generated by means of auto-matic differentiation (AD) in a structured and modular manner. Furthermore, a duality-preserving iterative algorithm is employed to solve flow adjoint equations arising in the adjoint model, ensur-ing identical convergence rates for the tangent and the adjoint models. A three-step strategy is adopted to verify the adjoint computation. The proposed method has several remarkable features:the use of AD techniques avoids tedious and error-prone manual derivation and programming;duality is strictly preserved so that consistent and highly accurate discrete sensitivities can be obtained; and comparable efficiency to hand-coded implementation can be achieved. Upon the cur-rent discrete adjoint method, a gradient-based optimization framework has been developed and applied to a drag reduction problem.     

多随机变量的桁架结构系统的可靠性分析及优化设计

针对桁架结构系统，采用随机有限元法（SFEM）计算结构系统的响应量，考虑内力重新分配，建立失效模式的安全余量方程，用验算点法计算失效模式安全余量的可靠性指标，用改进的分枝限界法，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，最后用PNET法计算出结构系统的失效概率，同时给出多随机变量的结构系统可靠度的敏度表达式，采用最佳矢量法，求解了大型桁架结构系统基于可靠性指标约束下的最小重量的优化设计问题，最后，给出了实际算例，计算结果表明；采用随机有限元法能更好地考虑结构系统的多个随机变量对系统可靠性产生的影响；所采用的可靠性分析方法和优化方法是有效的。     

Energy-optimal trajectory planning for solar-powered aircraft using soft actor-critic

High-Altitude Long-Endurance(HALE) solar-powered Unmanned Aircraft Vehicles(UAVs) can utilize solar energy as power source and maintain extremely long cruise endurance,which has attracted extensive attentions from researchers. Trajectory optimization is a promising way to achieve superior flight time because of the finite solar energy absorbed in a day. In this work,a method of trajectory optimization and guidance for HALE solar-powered aircraft based on a Reinforcement Learning(RL) framework is...     

A novel low pressure-difference fluctuation electro-hydraulic large flowrate control valve for fuel flowrate control of aeroengine afterburner system

To address the control accuracy of large fuel flowrate during pressure fluctuation, a novel electro-hydraulic fuel metering unit(FMU) is constructed for afterburner fuel system of military aeroengine. Different from the previous FMU, the proposed FMU can achieve the higher precision opening control by a new metering valve with double control chambers(MVDCC), and realize the lower pressure difference fluctuation regulating by a novel two-stage constant pressure difference compensated valve(CPDCV)...     

Convex optimization of asteroid landing trajectories driven by solar radiation pressure

High-area/mass ratio landers driven by Solar Radiation Pressure(SRP) have potential applications for future asteroid landing missions. This paper develops a new convex optimization-based method for planning trajectories driven by SRP. A Minimum Landing Error(MLE) control problem is formulated to enable planning SRP-controlled trajectories with different flight times. It is transformed into Second Order Cone Programming(SOCP) successfully by a series of different convexification technologies. A t...     

翼伞系统雀降性能及控制研究

根据翼伞系统的动力学方程,建立六自由度运动模型。对翼伞系统雀降过程进行仿真,分析了操纵方式对雀降性能的影响。在归航过程中着陆阶段的特定情况下,针对航迹跟踪过程中产生的纵向偏差,设计PID控制器对偏差进行修正。仿真结果表明:所设计的控制器简单有效地消除了纵向的偏差,保证了雀降操纵的顺利实施。     

弹道学在运载火箭总体设计中的实践与展望

简要介绍了运载火箭弹道学的主要研究内容,从弹道设计的基本方法出发,着重分析了弹道设计对于运载火箭总体设计的重要影响。在回顾我国运载火箭弹道学发展历史的同时,对我国运载火箭弹道学的特点进行了系统总结。最后结合后续我国运载火箭发展的技术需求,对弹道学的未来发展进行展望,提出了若干重点研究方向。     

外弹道测量的定位误差对测速折射修正的影响

考虑了在外弹道测量中由于定位的测量误差（主要指常值误差）而带来的测速折射修正的误差。从折射修正的原理出发,推导了该项误差的表现形式。理论分析与仿真计算表明,在高准确度测量定轨中该项误差是不能忽略的。给出了扣除该误差的方法,以利于在数据处理中来消除该项误差,从而可提高定轨的准确度。