卫星星座全球连续覆盖的仿真分析与优化

从仿真的角度对卫星星座的覆盖进行了分析和研究。 仿真分析需注意的问题，并给出了采样时刻的全球覆盖判定算法和地面点覆盖判定算法，；针对仿真计算的初步结果，文章提出了一系列有效指标，并利用模糊评判的方法对这些指标进行了综合分析，获得星座覆盖性能参数；在此基础上，对卫星星座全球连续覆盖性能的非线性优化进行了一定的研究。     

基于改进的NSGA-Ⅱ算法的区域覆盖卫星星座优化

对基于Pareto最优概念的非劣性分层遗传算法(NSGA-Ⅱ)进行了改进，与区域覆盖卫星星座的多目标优化设计相结合，提出基于改进的NSGA-Ⅱ算法的区域覆盖卫星星座优化设计方法，并利用多属性决策中的字典序法，根据目标的重要程度，在得到的Pareto解中进行选择．最后，利用STK和Matlab工具对遥感卫星星座进行了仿真，仿真结果表明该算法可以找到多个Pareto解，避免了传统的多目标优化求解方法的权值选择问题，并且比简单遗传算法具有更好的灵活性，从而解决了多目标优化的星座设计问题。     

序列凸优化的小天体附着轨迹优化

针对小天体附着多约束轨迹优化问题,提出一种基于序列凸优化的轨迹优化方法。首先采用内球谐引力场模型对目标小天体附近的不规则引力场进行精确建模,内球谐引力场模型是对经典球谐系数法的改进,形式简单,计算量小,并且克服了经典球谐系数模型在形状不规则的小天体附近不收敛的问题。对于小天体附着多约束轨迹优化问题,通过约束松弛、线性化、离散化过程,转化为一个可以迭代求解的二阶锥规划问题（SOCP）,进而采用内点法进行解算。数学仿真结果显示,优化结果符合各项约束条件,以零速度到达了目标着陆点,且符合燃耗最优的优化目标。利用序列凸优化算法进行小天体附着燃耗最优轨迹设计,推导简便,计算速度快,精度高,具有应用价值。     

一种面向弹道再入目标跟踪的HPD-SRCQSPF算法

针对弹道再入目标轨迹跟踪问题,提出基于混合建议分布的平方根容积求积采样粒子滤波（HPD-SRCQSPF）算法,该算法以混合建议分布为框架,由两个基本建议分布组成。其中一个基本建议分布为先验分布,另一个基本建议分布为平方根容积求积卡尔曼滤波估计后的值。该混合建议分布与真实的后验分布很接近,因此有着高效性、高精度等特点。仿真结果表明,对于弹道再入目标轨迹跟踪模型,相比于标准粒子滤波（SPF）算法和平方根容积求积粒子滤波（SRCQPF）算法,HPD-SRCQSPF算法可以在较低运算负载的情况下获得更好的跟踪性能。特别是在弹道目标变轨机动的情况时,所提出算法的性能增益更为显著。     

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.     

Kinematics-based four-state trajectory tracking control of a spherical mobile robot driven by a 2-DOF pendulum

Spherical mobile robot has compact structure, remarkable stability, and flexible motion,which make it have many advantages over traditional mobile robots when applied in those unmanned environments, such as outer planets. However, spherical mobile robot is a special highly under-actuated nonholonomic system, which cannot be transformed to the classic chained form. At present, there has not been a kinematics-based trajectory tracking controller which could track both the position states and the attitude states of a spherical mobile robot. In this paper, the four-state(two position states and two attitude states) trajectory tracking control of a type of spherical mobile robot driven by a 2-DOF pendulum was studied. A controller based on the shunting model of neurodynamics and the kinematic model was deduced, and its stability was demonstrated with Lyapunov's direct method. The control priorities of the four states were allocated according to the magnification of each state tracking error in order to firstly ensure the correct tracking of the position states. The outputs(motor speeds) of the controller were regulated according to the maximum speeds and the maximum accelerations of the actuation motors in order to solve the speed jump problem caused by initial state errors, and continuous and bounded outputs were obtained. The effectiveness including the anti-interference ability of the proposed trajectory tracking controller was verified through MATLAB simulations.     

测速定轨的实时算法

基于弹道参数的样条表示理论，本文提出了雷达目标的测速定轨实时算法。算法的关键是通过弹道表示系数的递推计算，由预测量与实际测量量的差别来计算样条系数和确定样条节点。在已有的弹道样条表示基础上，下一时刻的弹道计算有三种情况：用预测值、局部调整校条系数和增加样条节点，给出了在实时计算中采用哪种计算的准则。     

共面圆轨道最省燃料小推力多次变轨研究

本文研究两个共面圆轨道之间最节省燃料的多次变轨过程。通过分析，得到滑行段起点和终点之间的解析关系式，解决了变轨次数增加带来的计算问题。给出了从近地圆轨道到同面同步轨道的最优多次变轨的计算结果，并进行了分析和讨论     

气动力星座保持的最优控制

研究了利用气动力进行星座保持的最优控制问题。首先得到了正则方程，然后针对最优控制问题提出了一种求解算法，利用此算法进行了仿真计算。结果表明，算法简单有效。     

星载赋形反射面数传天线优化设计

为了使星载赋形反射面数传天线的波束形状满足设计要求,应用Minimax算法对其进行了优化设计。首先基于几何光学原理得到反射面中截线的初始形状,然后采用Newton插值函数对中截线进行拟合并把插值函数的系数作为优化变量,最终利用Minimax算法对优化变量进行调整来使获得理想的赋形波束。通过对一个X波段赋形反射面天线优化结果的分析及与基于几何光学原理综合算法所得结果的对比,表明此方法的有效性和优越性。数值仿真结果表明：该方法能够保证覆盖角域内任意一点的增益均高于设计指标要求。