带电粒子在近地球区运动的计算方法

基于磁层粒子动力学理论,根据单粒子方法和偶极磁场模型,在近地球区(L＜10),详细讨论了带电粒子的运动特征以及适合不同能量的带电粒子的计算方法,定量分析了磁层中的电场和磁场对各种能量的带电粒子漂移运动的影响.结果表明,对于能量低于105 eV的电子和102 eV的质子,宜采用引导中心近似方法;对于能量介于105～108 eV之间的电子和102～108 eV之间的质子,可在部分区域内采用引导中心近似方法,若运动区在10 Re内,则只能采用变步长的轨道法;而对于引导中心方法,粒子能量高于105 eV时可以忽略电场漂移的影响,粒子能量低于103 eV时不必考虑磁场漂移的影响,从而简化了引导中心方程组,提高了数值计算效率.      

Time suboptimal formation flying manoeuvres through improved magnetic charged system search

The development of fast and reliable optimization algorithms is required in order to obtain real-time optimal trajectory on-board spacecraft. In addition, the wide spread of small satellites, due to their low costs, is leading to a greater number of satellite formations in space. This paper presents an Improved version of the Magnetic Charged System Search (IMCSS) metaheuristic algorithm to compute time-suboptimal manoeuvres for satellite formation flying. The proposed algorithm exploits some strategies aimed at improving the convergence to the optimum, such as the chaotic local search and the boundary handling technique, and it is able to self-tune its internal parameters and coefficients. Moreover, the inverse dynamics technique and the differential flatness approach, through the B-splines curves, are used to approximate the trajectory. The optimization procedure is applied to the circular J2 relative model developed by Schweighart and Sedwick and to the elliptical relative motion model developed by Yamanaka and Ankersen. The results of this paper show that the convergence is better achieved by using the proposed tools, thus proving the efficiency and reliability of the algorithm in solving some space engineering problems.     

跨声速涡轮叶栅两点优化目标函数研究

针对跨声速涡轮叶栅单点优化方法难以获得整体工况性能提升、多点优化方法难以确定合理目标函数形式的问题，提出了两点优化的方法。为了节约优化时间成本，优化过程采用EIF （Equivalent inviscid flow） 模型进行数值模拟，通过添加惩罚函数保证叶栅满足设计流量和负荷要求，并采用叶栅效率线性平均的目标函数形式进行评价。选择两组跨声速涡轮叶栅进行优化设计，并利用CFD方法分析叶型变化对流场马赫数、激波和损失产生的影响。结果显示，所提出的优化设计方法在保证设计工况性能的同时，能够提升叶栅整体工况性能。通过流场分析，揭示了激波结构变化对不同工况损失影响的定性规律。综合全文研究后，给出了一种适用于跨声速涡轮叶栅两点优化设计的目标函数形式。     

Effects of stability margin and thrust specific fuel consumption constrains on multi-disciplinary optimization for blended-wing-body design

Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation". The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.     

视觉检测系统定位误差分离及修正技术探讨

介绍了视觉检测系统中的机械定位系统，讨论了两种定位方法──“硬件定位”（机械定位）及“软件定位”（定位误差的修正和补偿技术）。     

用最大值原理求某无人机的最优上升轨迹

为改进某无人机飞行性能，应用最大值原理求解无人机在垂直平面内的最优上升轨迹，推导了无人机最经济爬升所满足的极值方程；并用此方程和最快爬升极值方程这两类目标函数求解了某无人机的最优上升轨迹，计算结果表明，经优化后的爬升轨迹可以节省燃油，延长无人机的续航时间或快速爬升到预定的终点高度具有较好的性能收益。     

模块化功能组件备分优化研究

通过对影响备分因素的分析，以费用和可靠性指标为参数，从系统观点出发，建立了模块化功能组件备分优化模型，并给出一种算法。     

工序问题的数学模型

本文讨论了加工的次序问题，对于不同的、具有实际意义的问题，我们得到了相应的优化准则，这些准则在实际应用中便于操作，利用这些优化准则得到了加工次序问题的最优的结果。     

Influence and optimization of parameters of prepreg viscosity during placement

This paper tested the viscosity of prepreg in the automatic placement process, and conducted the probe and placement-90° peel tests through the test systems. The law of variation of prepreg viscosity during the laying process was studied through these tests under different conditions by taking the peel force to intuitively and quantitatively characterise the viscosity of the prepreg.The results show that this viscosity is inversely proportional to the laying rate, proportional to the laying pres...     

基于单杆操纵的双轴涡桨发动机稳态调节计划设计

为实现涡桨发动机的单杆操纵,提出一组基于发动机稳态特性的功率规划具体寻优设计流程。提出巡航状态下的两种综合性能指标,以兼顾发动机耗油率与螺旋桨效率的优化需求。为解决优化设计过程中稳态特性图难以有效获取的问题,对稳态求解模型进行了逆算法改进。某型双轴涡桨发动机的仿真结果表明,逆算法的求解精度与正向算法一致,且与传统双杆恒转速调节计划相比,单杆功率规划变转速调节计划使发动机在巡航状态设计工况下的平均耗油率降低了1.38%,平均效率/耗油率综合性能指标提升了2.09%。