三维弹道有理Bezier曲线造型与优化方法

为有效克服传统弹道优化方法解的收敛性和最优性受搜索算法、初始猜测等影响大的问题,提出了基于有理Bezier曲线的三维弹道造型与优化计算方法。根据边界条件用光滑且只含少量造型变量的有理Bezier曲线形成待优化三维造型弹道,采用逆动力学方法计算造型弹道倾角、弹道角速度和法向加速度等,结合弹道其它动力学方程和约束计算造型弹道性能指标,通过对弹道造型变量寻优得到最优弹道。这种方法将无限维弹道优化问题转换为对很少造型变量的参数优化问题, 而且得到的最优弹道完全光滑可飞。与间接法相比,无需求解两点边值问题使用方便、鲁棒性强;与直接法相比,不需要对动力学方程离散化、寻优变量少、求解收敛性好,而且解的全局最优性和光滑性更高。仿真结果及与自适应伪谱法的比较校验了方法的实用性和有效性。     

姿态角幅值约束下的太阳帆Lissajous轨道保持控制

太阳帆航天器以两姿态角作为轨道控制输入时, 其轨道动力学方程具有非仿射非线性特性. 通过人工平动点处线性化获得的线性系统可完成太阳帆航天器轨道保持控制器的分析与设计. 由于线性近似模型为有误差模型, 存在近似有效范围约束, 表现为轨道高度约束和姿态角幅值约束. 本文研究了姿态角幅值约束对线性近似模型有效性的影响, 通过计算给出满足近似误差要求的姿态角幅值约束. 当控制输入存在幅值约束时, 控制器轨道修正能力受到束缚. 通过研究姿态角幅值约束下的最大允许入轨误差, 设计了最大允许入轨误差下线性二次型调节器(LQR)用于轨道保持控制, 并将控制器应用于太阳帆日地三体系统非线性模型中, 实现了日地人工L₁点Lissajous轨道最大允许入轨误差的控制收敛和良好精度下的轨道保持控制.      

Simple method for performance evaluation of multistage rockets

Multistage rockets are commonly employed to place spacecraft and satellites in their operational orbits. Performance evaluation of multistage rockets is aimed at defining the maximum payload mass at orbit injection, for specified structural, propulsive, and aerodynamic data of the launch vehicle. This work proposes a simple method for a fast performance evaluation of multistage rockets. The technique at hand is based on three steps: (i) the flight-path angle at each stage separation is guessed, (ii) the spacecraft velocity is maximized at the first and second stage separation, and (iii) for the last stage the thrust direction is obtained through the particle swarm optimization technique, in conjunction with the use of the Euler–Lagrange equations and the Pontryagin minimum principle. The coast duration at the second stage separation is optimized as well. The method at hand is extremely simple and easy-to-implement, but nevertheless it proves to be capable of yielding near-optimal ascending trajectories for a multistage launch vehicle with realistic structural, propulsive, and aerodynamic characteristics. The solutions found with the technique under consideration can be employed either for a rapid evaluation of the multistage rocket performance or as guesses for more refined optimization algorithms.     

Optimal nodal flyby with near-Earth asteroids using electric sail

The aim of this paper is to quantify the performance of an Electric Solar Wind Sail for accomplishing flyby missions toward one of the two orbital nodes of a near-Earth asteroid. Assuming a simplified, two-dimensional mission scenario, a preliminary mission analysis has been conducted involving the whole known population of those asteroids at the beginning of the 2013 year. The analysis of each mission scenario has been performed within an optimal framework, by calculating the minimum-time trajectory required to reach each orbital node of the target asteroid. A considerable amount of simulation data have been collected, using the spacecraft characteristic acceleration as a parameter to quantify the Electric Solar Wind Sail propulsive performance. The minimum time trajectory exhibits a different structure, which may or may not include a solar wind assist maneuver, depending both on the Sun-node distance and the value of the spacecraft characteristic acceleration. Simulations show that over 60% of near-Earth asteroids can be reached with a total mission time less than 100 days, whereas the entire population can be reached in less than 10 months with a spacecraft characteristic acceleration of 1 mm/s².     

被动型星载氢钟H型气体电离模型及参数优化

针对被动型星载氢钟气体电离装置低功耗、低电磁干扰的设计要求,设计了一种基于平面盘绕馈能天线的H型电离系统,并建立该电离方法的数学模型。首先,由Maxwell方程出发,推导出了电离泡中的电场和磁场的分布模型,得到气体电离机制;再由电磁场的分布方程推导出氢气击穿判据表达式,建立了气体电离条件的数学模型;最后,利用电离击穿条件判据方程优化了电离装置的设计参数。数值仿真与测试表明该模型是有效的,采用优化的设计参数可以使电离功耗和电磁干扰特性得到改善,且电离直流电源总功率可小于2W。     

空间相机桁架支撑结构满应力优化设计与试验

针对空间相机桁架式支撑结构在设计过程中难以同时保证重量轻且刚度高的问题, 提出了采用满应力方法对桁架杆截面进行优化设计的思想. 以桁架杆重量最低为优化目标, 桁架杆自重变形和桁架的一阶固有频率为约束条件, 桁架杆截面的内外径为优化变量, 建立了基于满应力准则的优化模型. 经过优化, 桁架杆截面的外径为50mm, 内径40mm, 质量6.1kg, 一阶固有频率121Hz. 采用有限元法对优化结果进行模态校核和重力变形校核, 同时为检验碳纤维复合材料的热稳定性, 对桁架组件进行了热变形分析, 得到次镜的偏心和偏转均满足光学设计要求. 对优化设计出的桁架组件进行了0.2g扫频试验以及尺寸稳定性试验. 试验结果表明, 桁架组件一阶固有频率119Hz 与理论分析结果基本吻合; 在45N外力载荷和15°C均匀温升载荷的作用下, 桁架稳定性能良好, 次镜的偏心和偏转均小于5", 满足光学设计要求. 优化设计出的桁架支撑结构具有刚度高、尺寸稳定等特点, 这为实现空间相机向大口径、长焦距、轻型化方向发展奠定了研究基础.      

一种新型火星定点着陆轨迹快速优化方法

针对火星定点着陆任务大气进入段的轨迹规划问题,给出了一种基于hp Radau伪谱法的快速优化算法。综合考虑大气进入段的动力学约束、边值约束、以及着陆器的机动能力约束和安全性约束,结合hp Radau伪谱法的配点特性,将轨迹优化问题转换成一个大规模多约束参数优化问题,给出了大气进入段轨迹优化问题的求解框架;为了提高算法的计算效率,给出了参数优化过程中雅克比矩阵的解析表达式;并通过数学仿真对本文算法进行了数值验证,结果表明：     

基于闭环解析解的可重复使用运载器轨迹在线生成方法

The relationships between path constraints such as heating rate, dynamic pressure and aerodynamic load and velocity during entry flight are analyzed in  r-V  plane for an entry vehicle with mediate high lift to drag ratio. Through derivation and integration, a unified formula for path constraints is obtained in  r-V  plane. Based on the unified formula and several characteristics an analytical solution is obtained,and an online trajectory generation method is developed. In the method, the coupled longitudinal and lateral motion is considered, and can make the best use of flight capability and satisfy path constraints. Trajectory generation cases with different flight mission and downranges are tested. Simulation results demonstrate the capability and efficiency of the trajectory planning method in dealing with path constraints.     

亚轨道飞行器返回轨迹快速优化

快速、准确、鲁棒的轨迹生成方法可以增加任务的安全性与可靠性,极大地降低成本。针对亚轨道飞行器返回段特点,引入"伪控制量"、"末端进场走廊"等概念,分别采用高斯伪谱法和向前拉道伪谱法进行了返回轨迹快速优化研究,比较了两种伪谱法在处理复杂问题时的能力。仿真结果表明,向前拉道伪谱法不适合处理含控制量约束的问题,而高斯伪谱法在满足各种约束条件下,能够快速准确地生成亚轨道飞行器返回轨迹,同时验证了结果的可行性与最优性。     

一种空间邻近目标红外多传感器立体分辨方法

空间邻近目标在红外像平面的成像因相互交叠而形成簇状像斑,对红外传感器的信号处理提出了分辨的要求。为实现对空间邻近目标的立体跟踪定位,提出基于量子粒子群优化的空间邻近目标红外多传感器立体分辨方法。在对目标像平面成像建模基础上,构建基于最小二乘准则的空间邻近目标立体分辨目标函数,针对目标函数的高维非线性特点,以QP-SO解决目标函数优化问题,估计目标空间位置。仿真结果表明:相比于传统的先单传感器像平面分辨后多传感器视线交叉定位方法,此法具有更优的目标位置估计精度、辐射强度估计精度和目标个数估计正确率。