电波折射误差的经验-分层修正算法

建立了一种新的电波折射修正算法——经验-分层电波折射修正算法。经过与电波折射误差的经验修正和分层实测指数修正方法修正效果的比较，证实了该算法效果接近分层实测指数修正方法，明显优于经验修正方法。该方法为一些不其备提供分层电波折射参数的航天测控站电波折射误差修正问题，提供了行之有效的技术手段，对航天测控工程具有应用价值。     

基于增强协同优化的助推-滑翔导弹概念研究

针对一种两级运载器、滑翔级翼身组合体外形的导弹方案,采用多学科设 计优化方法研究了包括两级发动机装药量、工作时间、滑翔级翼面形状和助推-滑翔弹道在 内的优化设计问题。将系统分为总体、气动、发动机、弹道四个学科。采用增强协同优化方 法进行分解协调优化。目标函数为最大射程和最小总加热量的加权和,约束条件为驻点热流 、导弹质量、滑翔段终点速度、高度等。采用试验设计方法进行不同外形的气动力计算,并 构造响应曲面。结果表明该MDO方法可适用于助推-滑翔导弹的概念研究。
     

Flight trajectory optimization of sun-tracking solar aircraft under the constraint of mission region

The optimal yawing angle of sun-tracking solar aircraft is tightly related to the solar azimuth angle, which results in a large arc flight path to dynamically track the sun position. However, the limited detection range of payload usually requires solar aircraft to loiter over areas of interest for persistent surveillance missions. The large arc sun-tracking flight may cause the target area on the ground to be outside the maximum coverage area of payload. The present study therefore develops an optimal flight control approach for planning the flight path of sun-tracking solar aircraft within a mission region. The proposed method enables sun-tracking solar aircraft to maintain the optimal yawing angle most of the time during daylight flight, except when the aircraft reverses its direction by turning flight. For a circular region with a mission radius of 50 km, the optimal flight trajectory and controls of an example Λ-shaped sun-tracking solar aircraft are investigated theoretically. Results demonstrate the effectiveness of the proposed approach to optimize the flight path of the sun-tracking aircraft under the given circular region while maximizing the battery input power. Furthermore, the effects of varying the mission radius on energy performance are explored numerically. It has been proved that both net energy and energy balance remain nearly constant as the radius constraint varies, which enables the solar aircraft to achieve perpetual flight at almost the same latitude as the large arc flight. The method and results presented in this paper can provide reference for the persistent operation of sun-tracking solar aircraft within specific mission areas.     

从地球到日-火系平动点轨道的转移

平动点轨道特殊的空间位置及动力学特征,使其在深空探测中具有重要的应用。以日-火系平动点轨道(Lissajous与Halo轨道)任务为目标,结合平动点轨道的不变流形理论,研究了小推力转移问题。首先给出了圆型限制性三体动力学模型下平动点附近不变流形(稳定和不稳定流形)高阶分析解以及相应的计算实例。接着以流形分析解为基础,建立了初始小推力轨道优化模型,并利用改进的协作进化算法求解初始小推力轨道。最后将初始轨道离散,采用多点打靶法将最优控制问题转化为参数优化问题,并用序列二次规划方法(SQP)求解。仿真结果证明轨道设计方法的有效性。     

Near-optimal geostationary transfer maneuvers with cooperative en-route inspection using hybrid optimal control

This research investigates the performance of bi-level hybrid optimal control algorithms in the solution of minimum delta-velocity geostationary transfer maneuvers with cooperative en-route inspection. The maneuvers, introduced here for the first time, are designed to populate a geostationary constellation of space situational awareness satellites while providing additional characterization of objects in lower-altitude orbit regimes. The maneuvering satellite, called the chaser, performs a transfer from low Earth orbit to geostationary orbit, during which it performs an inspection of one of several orbiting targets in conjunction with a ground site for the duration of the target?s line-of-site contact with that site. A three-target scenario is used to test the performance of multiple bi-level hybrid optimal control algorithms. A bi-level hybrid algorithm is then utilized to solve fifteen-, and thirty-target scenarios and shown to have increasing benefit to complete enumeration as the number of targets is increased. Results indicate that the en-route inspection can be accomplished for a small increase in the delta-velocity required for a simple transfer to geostationary orbit given the same initial conditions.     

基于普适变量法的火星探测器轨道初步设计及仿真

对基于普适变量的火星探测器轨道初步设计进行了研究。设计了地火转移轨道段、地球逃逸轨道段,以及基于B平面法的中途修正方法。绘制了2013年火星探测发射和到达能量等高图,将得到地火转移轨道的初始参数输入STK软件获得了空间真实摄动环境中的火星探测轨道。     

A study of morphing aircraft on morphing rules along trajectory

Morphing aircraft can meet requirements of multi-mission during the whole flight due to changing the aerodynamic shape, so it is necessary to study its morphing rules along the trajectory. However, trajectory planning considering morphing variables requires a huge number of expensive CFD computations due to the morphing in view of aerodynamic performance. Under the given missions and trajectory, to alleviate computational cost and improve trajectory-planning efficiency for morphing aircraft, an offline optimization method is proposed based on Multi-Fidelity Kriging (MFK) modeling. The angle of attack, Mach number, sweep angle and axial position of the morphing wing are defined as variables for generating training data for building the MFK models, in which many inviscid aerodynamic solutions are used as low-fidelity data, while the less high-fidelity data are obtained by solving viscous flow. Then the built MFK models of the lift, drag and pressure centre at the different angles of attack and Mach numbers are used to predict the aerodynamic performance of the morphing aircraft, which keeps the optimal sweep angle and axial position of the wing during trajectory planning. Hence, the morphing rules can be correspondingly acquired along the trajectory, as well as keep the aircraft with the best aerodynamic performance during the whole task. The trajectory planning of a morphing aircraft was performed with the optimal aerodynamic performance based on the MFK models, built by only using 240 low-fidelity data and 110 high-fidelity data. The results indicate that a complex trajectory can take advantage of morphing rules in keeping good aerodynamic performance, and the proposed method is more efficient than trajectory optimization by reducing 86% of the computing time.     

基于航迹运行的大型客机推力管理系统需求分析

在基于航迹的运行(Trajectory Based Operation,TBO)模式中,推力管理是使飞机在安全飞行的同时,提高燃油经济性、飞行性能的关键技术。为了分析出必要可要的需求,基于民航客机推力及飞行性能原理,本文分析了基于4D-TBO的推力管理的功能及实施相关功能所必须的数据,在此基础上去设计基于航迹运行的推力管理系统(Thrust Management System,TMS)的架构,从而获得了满足未来大型先进客机飞行任务需要的TMS的重要基础信息。     

组合动力飞行器吸气段轨迹设计方法研究

水平起降组合动力可重复使用运载器是未来航天运输系统的重要发展方向。针对采用空气预冷涡轮火箭发动机的组合动力飞行器在吸气爬升段受多约束条件限制、动力与质量特性变化大的特点,提出了一种基于动压高度剖面的轨迹设计方法。通过推导基于高度的质点运动学方程,得到轨迹参数解算流程,并结合动压、迎角与法向过载的约束边界以及任务窗口确定动压高度剖面形状,从而得到满足要求的吸气段标称轨迹。在此基础上,设计了标称轨迹高度跟踪制导律。仿真结果表明,标称轨迹在吸气段多种不确定性偏差的影响下满足多约束要求,具有较强的鲁棒性。     

基于改进伪谱反馈控制的远程变轨闭环制导

利用最优反馈控制和轨迹快速重构技术,设计一种有限推力空间远程变轨自适应闭环制导方法。首先给出了最优反馈控制的求解原理和必要条件。将空间变轨动力学模型特点和伪谱法相结合,设计基于状态量缩减的计算效率改进策略以提高轨迹优化的实时性。基于改进伪谱法进行逐次轨迹快速重构,利用开环最优解形成闭环反馈,从而保证制导指令的实时更新,并通过引入控制逻辑改进制导算法。远程交会仿真表明,该闭环制导方法在保证任务指标具有一定最优性的同时,可以有效抑制多种参数不确定性和外界干扰的影响,具有较高的制导精度、自适应性和鲁棒性。