钛合金高压气瓶表面裂纹程序载荷谱试验的结果和分析

本文介绍两个带有疲劳表面裂纹的钛合金高压气瓶在程序载荷谱下的试验结果,并对它作了简单的分析。结果表明,即使气瓶具有“最大可能出现”的表面裂纹,它在公路运输及地面贮存保压过程中也是安全的。利用我们推导的表面裂纹半经验公式,参考NASA的K_(TH)/K_I实验数据,估计了在使用载荷作用下,气瓶在水介质中贮存保压较长时间裂纹不产生扩展的临界尺寸。     

Grinding behavior and surface appearance of（TiC_p＋ TiB_w）/Ti-6Al-4V titanium matrix composites

（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.     

Improving surface integrity when drilling CFRPs and Ti-6Al-4V using sustainable lubricated liquid carbon dioxide

In the quest for decreasing fuel consumption and resulting gas emissions in the aeronautic sector, lightweight materials such as Carbon Fiber Reinforced Polymers (CFRPs) and Ti-6Al-4V alloys are being used. These materials, with excellent weight-to-strength ratios, are widely used for structural applications in aircraft manufacturing. To date, several studies have been published showing that the use of metalworking fluids (MWFs), special tool geometries, or advanced machining techniques is required to ensure a surface quality that meets aerospace component standards. Conventional MWFs pose a number of environmental and worker health hazards and also degrade the mechanical properties of CFRPs due to water absorption in the composite. Therefore, a transition to more environmentally friendly cooling/lubrication techniques that prevent moisture problems in the composite is needed. This research shows that lubricated LCO₂ is a viable option to improve the quality of drilled CFRP and titanium aerospace components compared to dry machining, while maintaining clean work areas. The results show that the best combination of tool geometry and cooling conditions for machining both materials is drilling with Brad point drills and lubricated LCO₂. Drilling under these conditions resulted in a 90 % improvement in fiber pull-out volume compared to dry machined CFRP holes. In addition, a 33 % reduction in burr height and a 15 % improvement in surface roughness were observed compared to dry drilling of titanium.     

微织构刀具对钛合金切屑形成影响的仿真研究

针对微织构刀具对钛合金Ti6Al4V切屑形成以及微槽二次切削机理分析的不足，通过建立热-力耦合仿真模型对比研究不同微织构刀具、微织构几何尺寸以及切削速度对切屑形成的影响规律。数值仿真结果表明：微织构刀具更有利于断屑，二次切削作用使切屑的弯曲半径变大，微织构可以减小刀屑之间实际接触面积，降低切削温度。增大微织构宽度可以增强微槽的二次切削作用，利于断屑，但应注意其对刀具强度的削弱作用，而增大相邻微槽间距则会出现相反的二次切削作用机制。提高切削速度对各刀具均有利于断屑，弧形微织构刀具的降温效果最好，V形微织构刀具次之，矩形微织构刀具降温效果最差。研究结果对进一步理解微织构刀具对钛合金切屑的二次切削作用机理提供一定参考。     

Evolution mechanism of lamellar α and interlayered β during hot compression of TC21 titanium alloy with a widmanstätten structure

TC21 titanium alloy, as an important metal to fabricate the aircraft structural components, has attracted great attentions recently. A TC21 titanium alloy with widmanstätten structure was isothermally compressed. Based on the microstructure observation, the evolution of initial β grain, Grain Boundary α phase (α_GB), lamellar α and interlayered β was systematically investigated. The results showed that, with the increasing of height reduction, the α_GB underwent an evolution process from bending/kinking to breaking inducing the corresponding blurring of initial coarse β grain outline. Meanwhile, a significant phase transformation from α to β took place at the terminations of broken α_GB. The evolution of lamellar α and interlayered β in the colony was closely related to their deformation compatibility. In the α colony, the interlayered β experienced a larger deformation amount than lamellar α. The higher distortion energy promoted the occurrence of Dynamic Recovery (DRV) and Dynamic Recrystallization (DRX) to generate many Low Angle Boundaries (LABs) and High Angle Boundaries (HABs) in interlayered β, which induced an apparent grain refinement of β phase. On the contrary, the lower distortion energy and low deformation temperature suppressed the occurrence of DRV/DRX and restrained the globularization of lamellar α. Furthermore, the microstructure observation clearly revealed that the shearing separation mechanism dominated the evolution of the α phase from lamellar to short bar-like morphology.     

Ironing effect on surface integrity and fatigue behavior during ultrasonic peening drilling of Ti-6Al-4V

Imposing compressive residual stress field around a fastening hole serves as a universal method to enhance the hole fatigue strength in the aircraft assembly filed. Ultrasonic Peening Drilling (UPD) is a recently proposed hybrid hole making process, which can achieve an integration of strengthening and precision-machining with a one-shot-drilling operation. Due to the ironing effect of tool flank surface, UPD introduces large compressive residual stress filed in hole subsurface. In order to reveal the strengthening mechanism of UPD, the influence of ultrasonic vibration and tool dynamic relief angle on ironing coverage rate and its corresponding effect on surface integrity in UPD were analyzed. The experiments were conducted to verify the influence of ironing effect on surface integrity and fatigue behavior of Ti-6Al-4V hole in UPD. The results indicate that the specimen features smaller surface roughness, higher micro-hardness, plastic deformation degree and circumferential compress residual stress under higher ironing coverage rate. The fatigue life increases with the raise of ironing coverage rate, and the fatigue source site in UPD shifts from surface to subsurface comparing with that without vibration assistance. The results demonstrates that a better strengthening effect can be obtained by reasonably controlling the ironing coverage rate in UPD.     

Hot deformation behavior and strain compensation constitutive model of equiaxed fine grain diffusion-welded micro-duplex TC4 titanium alloy

In this work, two-stage diffusion bonding of micro-duplex TC4 titanium alloy was carried out to study the flow behavior and constitutive models of the bonding joint and the base metal after the same thermal cycling during the hot forming process. Microstructure and mechanical properties test were used to verify the good quality of the equiaxed fine grain diffusion-welded TC4 alloy. Quasi-static tensile experiment was carried out at temperatures ranging from 750–900 °C and strain rates of 0.0001–0.1 s⁻¹. The joint showed the weak dynamic recovery at strain rates of 0.01–0.1 s⁻¹ and temperatures of 750–850 °C. At strain rates of 0.0001–0.001 s⁻¹ and temperatures of 850–900 °C, the flow stress of joint presented steady-state characteristics. Different deformation conditions lead to the remarkable difference of dynamic softening performance between the joint and heat-treated base metal, but the flow stress in elastic and strain hardening stages exhibited similar behavior. The strain compensated Arrhenius-type constitutive models of TC4 joint and heat-treated base metal were developed respectively. The fifth-order polynomial functions between the material property correlation coefficients and strain were obtained. The models have shown good correlation, with correlation coefficient values of 0.984 and 0.99. The percentage average absolute relative error for the models were found to be 10% and 9.46%, respectively.     

Effect of adding Nb foil on joint properties of laser fusion welding for TC4 titanium and 7075 aluminum alloy

It is difficult to gain effective Ti-Al fusion welding joints due to their differences in thermal properties and the appearance of brittle Ti-Al Intermetallic Compounds (IMCs). The experiments of laser fusion welding for TC4 titanium and 7075 aluminum alloy were carried out, temperature field and ductility/brittleness, as well as chemical potential of elements, were calculated, and the effect of adding Nb foil on mechanical properties of the weld was also investigated. The results suggested that Nb atoms tend to diffuse toward Al side, which is conducive to the participation of Nb in the metallurgical reaction and contributes to forming the Ti-Nb-Al IMC layer at the interface. As the thickness of Nb foil increases, the tensile-shear force of joint climbs first but then declines, and reaches the highest value of 1663 N with 0.10 mm-thickness Nb foil, representing 58.38% enhancement compared with the non-added one. Adding Nb foil slows down the heat transfer as a blocker, and thus both the melting amount of Al and the mixing area of Ti and Al decrease. In addition, Nb alloying reduces the brittleness of the Ti-Al compound. Hence, the joint properties of titanium/aluminum are improved with the addition of Nb foil.     

推进剂管理装置的可靠性增长及试验验证

采用原始的焊接方式焊接筛网式推进剂管理装置的收集器合格率低、可靠性差。为此,采用纯钛箔作为过渡层进行了不锈钢筛网与钛合金支压板的电阻缝焊试验以及随后这两者与钛合金骨架的电子束焊试验,然后进行了地面力学环境下的振动试验,以验证焊接方式改进后收集器的可靠性。焊接试验结果表明,纯钛箔过渡层一方面可以大幅降低筛网在电阻缝焊时的焊接热量,有效地减小筛网的热变形;另一方面可以在电阻缝焊后形成牢固、封闭的纯钛/不锈钢筛网焊缝过渡区,有效地增加电子束焊时筛网的变形抗力,从而使得焊接后试样的合格率和性能大幅提高。振动试验结果表明,焊接方式改进后收集器的可靠度置信下限从0.90增加到了0.96。     

TC4钛合金切削中切屑塑性变形分析

对TC4钛合金切削过程中锯齿形切屑形成过程和切削力的关系进行了实验研究,并对锯齿形切屑形成中微观塑性变形区进行了分析。结果表明:当切削速度大于48.75 m/min时,切屑由带状转变为锯齿形。锯齿形切屑的形成导致了切削过程中切削力的波动变化,切削力与切屑的锯齿形变化规律一致,锯齿形切屑形成中塑性变形区的宽度随切削速度的增加而减小。