一种可用于微波辐射计热定标源的测温控温系统

介绍测温控温的微波热定标源研究中所用的热定标源的结构及测温控温电路系统     

杂波环境下的机动目标检测和跟踪算法

交互多模式(IMM)是一种有效的机动目标跟踪算法,但由于其要求具有很多的先验前提条件而不利于工程实现.研究了一种杂波环境下更适合于工程实现的机动目标(同样适用非机动目标)的跟踪算法,该算法通过一种由测量位置估计误差决定的机动检测函数来实现杂波背景中的机动目标检测,并通过改变Kalman滤波的相关参数,实现自适应跟踪.该算法克服了IMM算法的模式限制和复杂性,同时也避免了对非机动目标的跟踪中,在跟踪模式间相互切换时所换造成的影响.通过在空管系统(ATC)的大量模拟实验,验证了该算法的有效性和重大应用价值.     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

Numerical analysis for impacts of nozzle end-clearances on aerodynamic performance and forced response in a VNT turbine

It has been well known that nozzle end-clearances in a Variable Nozzle Turbine (VNT) are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle end-clearances remain the same, varying nozzle end-clearances’ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress. Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances’ distribution.     

可压缩流体恒温热线风速仪校准方法

开展了恒温(CT)热线风速仪校准方法的研究,以满足可压缩流体中湍流度测量需求。将对数函数与多元回归技术相结合,建立了恒温热线风速仪校准的数学模型,并进行了风洞湍流度测量试验验证。在马赫数Ma=0.3~0.55范围内进行了校准试验,根据建立的数学模型对试验数据进行拟合,拟合优度R2=0.999 82,平均绝对速度偏差Δu=0.18m/s,基本满足了恒温热线风速仪校准精度要求。对马赫数Ma=0.55条件下流场进行了湍流度测量,速度测量偏差为0.034%,流场湍流度Tu=0.14%。试验结果证明了恒温热线风速仪应用于可压缩流体速度测量的可行性。     

面向下行多天线传输的能效最优上行训练

针对时分双工(TDD,Time Division Duplex)多天线系统的下行传输,研究了以能量效率(EE,Energy Efficiency)最大为准则的上行训练设计问题.证明了存在信道估计误差时系统EE和频谱效率(SE,Spectrum Efficiency)上界是上行训练长度的凹函数,分析了信噪比和电路功耗等因素对两种准则下最优训练长度的影响.分析和仿真结果表明,当信噪比很高时,基于EE最优的设计将退化成基于SE最优的设计；而一般情况下,与最大化SE的训练设计相比,最大化EE要求系统配置更长的训练.     

Aircraft robust multidisciplinary design optimization methodology based on fuzzy preference function

This paper presents a Fuzzy Preference Function-based Robust Multidisciplinary Design Optimization (FPF-RMDO) methodology. This method is an effective approach to multidisciplinary systems, which can be used to designer experiences during the design optimization process by fuzzy preference functions. In this study, two optimizations are done for Predator MQ-1 Unmanned Aerial Vehicle (UAV): (A) deterministic optimization and (B) robust optimization. In both problems, minimization of takeoff weight and drag is considered as objective functions, which have been optimized using Non-dominated Sorting Genetic Algorithm (NSGA). In the robust design optimization, cruise altitude and velocity are considered as uncertainties that are modeled by the Monte Carlo Simulation (MCS) method. Aerodynamics, stability and control, mass properties, performance, and center of gravity are used for multidisciplinary analysis. Robust design optimization results show 46% and 42% robustness improvement for takeoff weight and cruise drag relative to optimal design respectively.     

测量船通信网络自检测方法

针对测量船通信网络由2层帧方式交换升级为3层包交换方式后无法使用上星自环检测方式实现自检测的问题,在分析通信网络自检测模式下的链路特性的基础上,提出基于组播报文实现自检测的构想。设计利用组播洪泛特性实现报文环回的网络拓扑结构以及实现检测与对比报文的硬件设备,阐述检测软件发送、接收、处理报文的流程,实现了网络通断、时延及丢包率的自检测,并通过模拟检测实验证明了设计方案是切实可行的。     

Fault-tolerant control with mixed aerodynamic surfaces and RCS jets for hypersonic reentry vehicles

This paper proposes a fault-tolerant strategy for hypersonic reentry vehicles with mixed aerodynamic surfaces and reaction control systems (RCS) under external disturbances and subject to actuator faults. Aerodynamic surfaces are treated as the primary actuator in normal situations, and they are driven by a continuous quadratic programming (QP) allocator to generate torque com-manded by a nonlinear adaptive feedback control law. When aerodynamic surfaces encounter faults, they may not be able to provide sufficient torque as commanded, and RCS jets are activated to augment the aerodynamic surfaces to compensate for insufficient torque. Partial loss of effective-ness and stuck faults are considered in this paper, and observers are designed to detect and identify the faults. Based on the fault identification results, an RCS control allocator using integer linear programming (ILP) techniques is designed to determine the optimal combination of activated RCS jets. By treating the RCS control allocator as a quantization element, closed-loop stability with both continuous and quantized inputs is analyzed. Simulation results verify the effectiveness of the proposed method.     

某型直升机旋翼转速表的数字化设计方案

提出某型直升机数字旋翼转速表的研制方案,给出以频率/数字(F/D)变换电路为核心的主要硬件原理,分析了采样误差的产生及抑制误差的措施.装机部件研制成功证实了方案的可行性.