基于LabVIEW的通信系统的构建

本设计基于LabVIEW仿真软件完成了基本通信系统和通信综合系统的构建。该系统涵盖了模拟调制,数字调制,模拟信号数字传输,信道编码,最佳接收系统几部分内容。通过系统仿真,实现了系统输入输出波形的直观显示,解决了教学中实验效果不理想,理论内容不好理解的问题。同时通过内置的Web Server进行网页发布后,用户可以在客户端通过web浏览器远程调用并运行本系统,提高效率,节约成本。     

吊挂系统对波瓣混合排气系统气动热力性能影响

为了明确短舱中吊挂系统的堵塞效应对波瓣混合排气系统气动热力性能的影响,采用数值模拟的方法对包含吊挂的混合排气系统进行了定量研究。研究结果表明,受吊挂系统的影响,在波瓣混合排气系统混合段内,存在着一大尺度的回流区,其作用范围随吊挂长度的增加而增加。在性能参数方面,与未考虑吊挂系统时相比,考虑吊挂之后,虽然混合排气系统出口处热混合效率以及推力系数下降很小,最大降幅仅分别为0.017和0.01,但总压恢复系数却显著下降,最大降幅达到了0.03。此外,随着吊挂系统长度的变化,排气系统出口处的热混合效率、总压恢复系数以及推力系数变化幅度小于0.01,变化很小。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

航空发动机全飞行包线稳态划分方法研究

航空发动机在鲁棒控制器设计过程中存在飞行包线区域难以系统划分的问题,为此,提出基于推力耗油率特性和基于动压耗油率特性的航空发动机飞行包线划分法。根据某型涡扇发动机在全包线范围内稳态工作时的推力、耗油率及动压特性,结合大气条件的客观规律,通过两种划分方法将飞行包线划分为65 个区域,用每个区域对应标称点的参数代替其周围小偏差区域和边界点参数。通过对该发动机全包线内各区域标称点与边界点参数的对比,证明两种方法均对全飞行包线划分有效,可为后续航空发动机控制器设计提供理论基础。     

三角翼俯仰滚转耦合运动气动特性研究

介绍一套用于３ｍ 低速风洞的俯仰滚转两自由度大振幅非定常实验系统,并利用该系统对—三角翼单独俯仰和滚转及俯仰滚转耦合运动时的非定常气动特性进行了研究。结果表明,飞行器俯仰滚转耦合运动时的气动特性比单独俯仰和滚转时的气动特性复杂得多。     

液氧/煤油火箭发动机推力和混合比的非线性调整研究

对液体火箭发动机推力和混合比的大范围非线性调整,提出了分级迭代直接求解高维非线性方程组的计算方法,并对液氧／煤油补燃循环火箭发动机的典型调整方案进行了计算分析,得到了考虑作为冷却剂的燃料温升、主涡轮入口燃气温度、主涡轮泵转速、发动机真空比冲以及燃气发生器喷注器压降和主燃烧室喷注器压降约束下发动机推力和混合比的最大可调域。     

预混可燃流体在大长径比圆管内流动传热点燃研究

通过对预混可燃流体在大长径比圆管内的流动和传热的分析,首次提出一种用于脉冲火箭发动机多次点火的方法。新型发动机中,预混可燃流体在流动过程中被加热,并自动点火,按需要通过迅速散热保证熄火,从而实现了任意脉冲的自动点火和熄火,并可实现推力调节。对这种点火方法进行了理论分析和实验研究,成功地得到了5个工作脉冲。     

直连式喷气发动机试车台试验件进气的联接方式及有关问题

针对直连式喷气发动机试车台稳定段同试验件的联接问题，根据空气流量测量、补氧及推力测量等不同试验目的与要求，讨论了选择联接方案对试验结果的影响。结果认为，模拟总温较高时，音速喷嘴流量测量联接方式应慎重选用；采用能够测量进、出口压力的迷宫密封方式，可以根据喷嘴及回绕式阻隔件流动理论计算出空气泄漏量并可测出压力损失值，从而对试验所要求的补氧量及推力测量提供较准确的修正。     

轨姿控发动机动态推力与推力矢量测试系统研制

针对目前轨姿控发动机动态推力与推力矢量测试系统测量精度低、测试覆盖面不全及操作的复杂性,研制了一套基于压电测力平台的动态推力与推力矢量测试系统。此系统的研制攻克了测力平台结构参数优化技术、标准信号发生器设计技术、测试相间干扰处理技术等五项关键技术点.实现了连续脉冲力及多方向力的测量,系统操作可靠、便捷,各项测试指标满足总体要求,为动态推力及推力矢量测试提供了手段。