液体火箭发动机氧腔流动分析及均流板设计研究

采用Navier-Stokes方程数值模拟了某型火箭发动机推力室氧腔流动，计算分析了节流板表面的总、静压分布及其畸变指数。依据压力畸变提出了氧腔均流孔板改进方法，并通过多次分析-设计循环得到了新的均流板。最后对所设计的均流板进行了详细地计算分析和实验验证。分析和验证表明新设计的均流板使氧腔出口节流板表面压力畸变降低了30．4％，显著提高了氧腔压力均匀性，进而可以大大提高燃烧效率。     

Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

非对称变翼飞行器复合控制系统设计

针对非对称变翼飞行器的姿态控制问题,提出了一种复合控制系统的设计方法。基于非对称变翼的姿态动力学模型,将变翼作为一种主动控制方式,提出了非对称变翼的使用条件,并采用逻辑函数设计了气动舵和变翼的复合控制分配策略。利用扩张干扰观测器估计了变翼过程中的扰动,采用全局滑动模态的变结构控制方法,设计了姿态复合控制系统,抑制了变形过程中参数的剧烈变化和变形引起的附加扰动。通过仿真,一方面与固定翼飞行器对比,校验了非对称变翼控制的有效性;另一方面通过气动数据的正负拉偏,验证了控制器对气动参数的摄动有良好的鲁棒性。     

微射流技术的原理及其应用

介绍了微射流技术的原理及其初步应用。基于非线性系统的演化对初始条件具有敏感依赖这个事实发展起来的微射流技术，由于与常规持续喷射射流控制方式相比具有许多优点，因而在流动和换热控制应用方面取得明显的效果。并指出，随着研究工作的深入，该项技术还可望用于高马赫数飞行体表面气体流动控制、火箭发动机推力方向控制等。     

多Agent协调模型与算法在时隙分配中的应用

针对离场时隙分布式分配问题,阐述了航空公司和流量管理部门的博弈关系,建立了多Agent的博弈协调模型,提出了协调算法,并进行了算例分析.算例结果显示,应用博弈协调模型和协调算法,3个航空公司的延误时间分别为1 min、6 min和21 min,比RBS算法分配结果分别减少了10 min、6 min和2 min.算例结果说明多Agent的博弈协调模型及算法是可行的和有效的.     

农村家庭资产配置与金融市场参与的实证研究——以浙江金华地区为例

通过金融深化增加农村家庭参与金融市场的机会，提高农村家庭的福利，让金融为广大农村家庭服务，改善其资源配置，解决农村金融抑制的问题，是当前金融改革与发展的一个重要内容。文章将农村家庭的实物资产分为生活型与生产投资型，将金融资产分为安全型和风险型，根据问卷调查获取的数据建立Logistic回归模型，对东部地区农村家庭实物资产配置和参与金融市场的决定因素进行研究，探讨当前农村的金融深化与金融发展路径。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

吊挂系统对波瓣混合排气系统气动热力性能影响

为了明确短舱中吊挂系统的堵塞效应对波瓣混合排气系统气动热力性能的影响,采用数值模拟的方法对包含吊挂的混合排气系统进行了定量研究。研究结果表明,受吊挂系统的影响,在波瓣混合排气系统混合段内,存在着一大尺度的回流区,其作用范围随吊挂长度的增加而增加。在性能参数方面,与未考虑吊挂系统时相比,考虑吊挂之后,虽然混合排气系统出口处热混合效率以及推力系数下降很小,最大降幅仅分别为0.017和0.01,但总压恢复系数却显著下降,最大降幅达到了0.03。此外,随着吊挂系统长度的变化,排气系统出口处的热混合效率、总压恢复系数以及推力系数变化幅度小于0.01,变化很小。     

延误航班停机坪作业运行控制研究

随着航班航次的增加，机场变得越来越繁忙．地面作业操作不当所导致的飞机地面事故日益增加：在介绍航班停机坪作业的基础上，分析了地面作业的特点，在此基础上，根据航班延误时在作业资源充足和不足情况下，研究了航班停机坪作业的一般方法。在资源充足情况下，航班延误的地面作业控制主要采用AOE方法，缩短关键路线的作业时间。而资源不足情况下，除了控制关键路线作业时间外，还要根据排序算法合理分配关键作业的资源，以实现缩短延误时间的目的。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.