平面波导器件封装工艺软件的研究与开发

平面波导器件的耦合封装是制约其发展的一个瓶颈,通过研究平面波导器件的封装工艺特点,分析了封装过程对控制系统的要求.基于Visual Basic.Net开发了封装工艺软件,研究了手动调整、视觉引导粗对准、自动化对准以及点胶固化四个模块的设计方法,并对编程过程中的关键技术进行了讨论.     

高校教师职业生涯规划管理的思考

高校教师是知识型员工，具有很强的成就欲望和明确的价值观，对其进行职业生涯规划与管理要给其充分的民主权和参与管理权，并根据教师在不同职业生涯阶段的不同特点进行职业生涯的规划。高校教师职业生涯规划有利于高校合理配置人力资源，提高高校的向心力和凝聚力，实现高层次激励的作用。高校可通过建立教师职业生涯规划与管理平台、公平的教师绩效评估体系、科学的薪酬管理体系、系统化的培训体系、有效的激励机制，促成高校和教师的共同发展，实现共同的目标。     

星光折射连续修正方法及制导规划

针对星光折射模型本身固有的缺点，对星光折射连续修正方法进行了研究，该方法首先探索折射星的分布规律，而后采用Unscented卡尔曼滤波算法+多星连续观测的方案实现定位。同时，对可用星与选星要素和基于突防规划的星光制导弹道设计两方面进行了研究，在星光制导制约机理研究的基础上，提出了惯性/星光制导规划方法，该方法包括导航星的优选策略、导航星优选技术和星点位置的精确计算3步。最后，介绍了星光制导系统的系统组成和功能原理。     

复杂通道类零件五轴加工刀轴规划

针对复杂通道类零件的五轴数控加工,提出一种控制刀轴稳定变化的刀轴规划方法。首先,通过对刀轴可行空间的均匀离散,建立一种高效求解刀轴可行空间精细边界的方法;然后,依据刀轴矢量规划准则,求解满足机床角加速度约束的可行刀轴序列集合,并提出一种切削行内旋转坐标线性变化的刀轴矢量规划方法;最后,通过建立刀轴变化和残留高度综合评价指标,得到优化的刀轴矢量,并与典型的商用软件进行了实验对比验证。结果表明,使用本文提出的刀轴规划方法得到的切削行刀位轨迹旋转坐标变化均匀,旋转轴角加速度最大值降低到商用软件的10%以下,残留高度平均值降低了22%,改善了切削过程的稳定性,提高了加工表面质量。     

基于CDIO模式的飞行计划实践课程教学方法研究

针对民航院校的交通运输专业飞行运行管理方向的飞行计划实践课程,基于CDIO工程教育教学模式理念和方法,提出了以案例为导引,"多目标-多层次-多效果"的教学模式,重点阐述了基于CDIO模式的飞行计划实践课程的教学模式改革与实践应用。教学实践证明:该项研究对深化民航院校的教学改革,更新实践课程的教学模式,培养应用型和创新型人才具有一定的意义。     

Optimal mission planning of the reconfiguration process of satellite constellations through orbital maneuvers: A novel technical framework

In this paper, a general new methodology is presented for the orbital reconfiguration of satellite constellations on the basis of Lambert targeting theorem. In view of the cost and risk reduction, it is very important to consider the problem of satellite constellation reconfiguration with the two constraints of overall mission cost minimization and the desired final configuration. Hence, the dependent non-simultaneous deployment approach is proposed to minimize overall fuel cost. Despite the fact that the satellites deploy in a non-simultaneous manner, supplementary phasing maneuvers on the target orbital pattern to achieve the desired orbital configuration are avoided. Moreover, a novel idea is presented to optimize the flight of satellites, which plays an important role in complying with the constraint of overall fuel cost minimization as much as possible. In order to achieve the global optimal solution of the satellite constellation reconfiguration problem, the efficient hybrid Particle Swarm Optimization/Genetic Algorithm (PSO/GA) technique, is implemented. Finally, to indicate the superiority of the presented method, a comparison to the simultaneous maneuver viewpoint is made on a number of representative cases. The obtained results imply significant reduction of reconfiguration costs by employing the proposed method.     

基于神经网络和人工势场的协同博弈路径规划

协同博弈路径规划是空战自主决策、机器人体育比赛等应用场景中的重要问题，其难点在于对环境对抗性反馈的实时自适应和多智能体的相互配合。提出一种基于神经网络和人工势场的协同博弈路径规划方法，使用反向传播（BP）神经网络自适应调整人工势场函数系数，并将人工势场作为神经网络输出端的特征提取。为解决真实样本质量和数量不足的问题，基于遗传算法仿真生成样本数据用于神经网络训练，并通过滚动时域的思路面向动态博弈优化样本性能。从样本数据中提炼出距离差与航向差以反映协同和博弈特性，利用神经网络的黑盒特性和学习能力解决协同博弈问题。应用于二对一反隐身超视距空战路径规划，比经典人工势场法有明显性能提升，且计算开销可接受，计算复杂度分析表明该方法可以较好扩展到多机对抗场景。     

Three-dimensional guidance law based on adaptive integral sliding mode control

For the terminal guidance problem of missiles intercepting maneuvering targets in the three-dimensional space, the design of guidance laws for non-decoupling three-dimensional engage-ment geometry is studied. Firstly, by introducing a finite time integral sliding mode manifold, a novel guidance law based on the integral sliding mode control is presented with the target acceler-ation as a known bounded external disturbance. Then, an improved adaptive guidance law based on the integral sliding mode control without the information of the upper bound on the target accel-eration is developed, where the upper bound of the target acceleration is estimated online by a designed adaptive law. The both presented guidance laws can make sure that the elevation angular rate of the line-of-sight and the azimuth angular rate of the line-of-sight converge to zero in finite time. In the end, the results of the guidance performance for the proposed guidance laws are pre-sented by numerical simulations. Although the designed guidance laws are developed for the con-stant speed missiles, the simulation results for the time-varying speed missiles are also shown to further confirm the designed guidance laws.     

NONLINEAR PREDICTIVE CONTROL FOR TERRAIN FOLLOWING

ＮＯＮＬＩＮＥＡＲＰＲＥＤＩＣＴＩＶＥＣＯＮＴＲＯＬＦＯＲＴＥＲＲＡＩＮＦＯＬＬＯＷＩＮＧＣｕｉＨｕｔａｏ（崔祜涛），ＧｅｎｇＹｕｎｈａｉ（耿云海），ＹａｎｇＤｉ（杨涤）（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇｙ，Ｐ．Ｏ．Ｂｏｘ１３７，...     

我国直升机外部噪声控制技术发展思路研究

直升机外部噪声控制技术是直升机技术发展的重要方向。对直升机外部噪声控制技术的现状及发展趋势进行了分析，基于我国直升机外部噪声控制的技术基础，从基础研究、主被动控制技术等方面提出了我国直升机外部噪声控制技术的发展思路。