基于拉格朗日方法的通气云状空泡三维非定常脱落特性研究

采用均相流模型并结合FBM湍流模型,对绕轴对称回转体通气云状空泡流动特性进行了三维数值模拟,基于实验结果对数值方法进行验证,同时利用基于拉格朗日体系的有限时间李雅普诺夫指数(FTLE)、拉格朗日拟序结构(LCS)和粒子追踪方法分析了其三维非定常脱落特性。研究结果表明:纵截面上空泡覆盖区域的拉格朗日拟序结构整体呈椭球状分布,内部为不规律的复杂拟序结构;不同横截面上拟序结构分布存在很大差异。空泡内部的非对称流动结构和周向流动导致空泡呈现很强的三维运动特性。反向射流在周向上推进的不同步性,是造成空泡呈现不规则断裂和大尺度U型空泡团脱落的主要原因。     

大跨时空任务背景下的太阳能无人机任务规划技术研究进展

通过任务规划技术合理的优化太阳能无人机的飞行轨迹和动力学参数,能够有效提高太阳能无人机的能量利用率,使其胜任许多大范围跨时间跨空间飞行任务。从能量建模、续航评估和能量管理策略3个方面对大跨时空任务背景下太阳能无人机任务规划技术的研究进展进行了综述。在能量建模方面,介绍了当前主流的太阳辐射模型和能量生产基本框架;在续航评估方面,分析了目前的指标设计和应用方法;在能量管理策略方面,从能量综合应用、风力滑翔机制、轨迹优化方法和面向特定任务的应用4个角度,梳理了当前的研究现状。最后,对该领域未来可能的研究方向进行了展望。     

Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination −13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. −1.8°; mag. declination −15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. −11.1°; mag. declination −14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F₃ layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.     

绝缘子清扫机器人的动力学建模及轨迹优化

研究了支柱型绝缘子带电清扫机器人伸缩臂运动引起升降臂振动的问题，将升降臂和伸缩臂分别建模为柔性臂和刚性臂，形成末端具有移动刚体的柔性臂系统，在假设模态法的基础上建立了系统的Lagrange动力学模型，建模考虑了大多数柔性臂模型忽略的重力和非线性耦合的影响，分析了伸缩臂全局运动与升降臂局部振动的相互影响。提出一种单变量优化方法，以升降臂的残余变形能为性能指标，优化伸缩臂的运动轨迹，降低升降臂的残余振动。应用该方法对梯形速度曲线进行了优化，结果表明可以有效地控制升降臂的残余振动。该方法计算量小，便于在线实现。     

面向多威胁的无人机智能目标跟随策略设计

随着无人机(UAV)一体化作战的不断发展,无人机在搜索到运动目标之后,需要立即转入跟随模式,考虑到战场环境的复杂性,研究了在多个威胁源条件下无人机跟随运动目标的问题,为了保证无人机的安全性以及跟随目标的精确性,提出了一种基于决策树的无人机智能目标跟随策略。首先对威胁概率图(TPM)进行建模;然后采用几何图法及任务优先级生成不同的规则,建立相应的决策树,并设计了不同规则下无人机飞行航向及速度指令;最后通过仿真验证所提出的智能目标跟随策略的有效性。      

涡轮轴断裂条件下空气系统强瞬变过程分析

建立了针对空气系统强瞬变过程的控制方程及模块化仿真模型,该模型包括构成瞬态空气系统网络的4类基本元件:容腔元件、节点元件、管道元件和节流元件。上述基本元件及其组合单元的仿真结果与公开的文献数据能够较好的吻合,证明该模型能够模拟容积效应、惯性力作用占主导的强瞬变空气系统演化。在此基础上,仿真分析了某型航空发动机高压涡轮(HPT)轴断裂失效条件下的空气系统强瞬变过程。结果表明,涡轮轴的断裂失效能够引起空气系统内部复杂响应过程,并能导致涡轮盘所受的轴向力反向。该瞬态空气系统模型成功模拟了气流参数毫秒时间量级的动态响应,为深入研究航空发动机内部复杂空气系统的瞬变机理提供了有效的技术手段。      

基于多值决策图的温储备系统可靠性建模方法

温储备系统是冷储备与热储备系统的推广,在实际中有广泛应用。针对不可修温储备系统的可靠性建模问题,已有基于多值决策图(MDD)的系统可靠性建模方法。该方法以系统中的单元故障为建模对象,分别构建故障级MDD与系统级MDD,进而获得系统可靠度的解析表达式。然而,该表达式中不同维度积分相互混杂,计算给定时刻的系统可靠度需要首先梳理系统可靠度的表达式,以利用数值方法求解其中的积分。为实现系统可靠度的程序化计算,在已有研究基础上提出将系统级MDD按故障数分解为一系列子决策图,通过对MDD中边的概率重新赋值获得每一子决策图的发生概率,得到系统可靠度的规范形式,形成一套完整的系统可靠度计算方法。      

基于三维场路协同方法的静电损伤仿真测试平台

静电放电已经逐渐成为导致各类电子设备故障的主要原因之一,在电子产品研制过程中通常采用实物测试方式检验产品抗静电能力,但该方式耗费资金过大、可重复性差同时易损伤受试设备。在这种情况下,建立基于三维场路协同方法的静电损伤仿真测试平台有效地解决了上述问题。该平台以电脑仿真技术（CST）软件为基础,通过构建静电放电枪模块,结合受试设备模块和仿真参数设置模块,以时域有限积分法求解器进行仿真,并利用数据输出和处理模块得出结果。利用建立好的仿真测试平台对一台数据传输设备进行8 kV接触放电,观察其表面电流和磁场分布,并对其造成的传导干扰和辐射干扰进行分析。通过建立静电损伤仿真测试平台,实现了静电放电测试的可重复以及无损伤的目的,具有较强的工程指导意义。      

双级圆柱齿轮减速器虚拟样机建造研究

以虚拟样机理论为基础,以某型号双级圆柱齿轮减速器为分析对象,整合三维造型软件、系统分析软件和有限元分析软件,形成了齿轮减速器综合开发平台。该平台中,基于优化设计的齿轮自动建模方法具有通用性、实用性和独创性,并且可以与CAM/CAPP模块进行整合;优化设计数学模型适用于多种线形齿轮,具有通用性;样机的仿真结果与实际测量数据相吻合率达98%。该平台除了可以完成设计和系统分析外,还可以仿真实际使用环境,完成运动学、动力学和有限元分析,有实际的工程意义。     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.