多层黏弹性复合材料结构阻尼性能优化设计

针对多层黏弹性复合材料结构阻尼性能设计优化问题,运用能量法既考虑其面内应变能,又考虑其横向剪切应变能,建立其损耗因子的计算模型,并用实验方法验证其挠度函数的可行性.然后以多层黏弹性复合材料结构的损耗因子最大化为优化目标,用改进遗传算法对其阻尼性能进行单变量和多变量优化设计.数值结果表明,应用遗传算法优化设计多层黏弹性复...     

Statistical study of radio drifting pulsation structures with associated CMEs and other observations

Solar radio burst, especially the fine structures (FSs) and the drifting pulsation structures (DPSs), may be used as an important diagnostics tool to draw the evolution map of the flare loop in the initial phase of solar flares. In this work, 52 radio events were found accompanying with DPSs. They were all observed with the Solar Radio Spectrometers (0.625–7.6 GHz) of China during 1998–2004. Combining the radio observations with LASCO-C2, Goes-8 SXR, H_α, EUV and Trace observations, we analyzed all these events and obtained some statistic conclusions: First, 88% DPSs take place at the initial phase of the radio burst, and their rich spectrum characteristics are helpful to understand the events further. Second, 83% DPSs are associated with CMEs or ejection events, and all the events are accompanied by Goes SXR flare. Third, for CMEs and DPSs, which take the first step, there is no significant predominance of either of them. The relationship between the DPSs and CMEs is still not clear in this study because of the lack of spatial resolution in the centimeter–decimeter band. However, the EIT or Trace ejection happened during the onset/end time of DPSs. They are signatures of the initial phase of CMEs. Two events will be illustrated to explain this.     

空间站充气式下载系统的概念研究

空间站充气式下载系统 (IDS)是在俄罗斯充气式再入与降落技术 (IRDT)基础上发展起来的一种新概念航天回收技术。详细介绍了IDS基本概念和工作原理 ,通过与传统降落伞回收方式的比较 ,总结了该技术的特点。讨论了该技术对结构、轨道、气动力、气动热、热防护层等关键子系统的设计需求。归纳了国外研究现状及发展趋势 ,分析了航天和军事领域的应用前景。     

Design of aircraft structures against threat of bird strikes

In this paper, a method to design bird-strike-resistant aircraft structures is presented and illustrated through examples. The focus is on bird strike experiments and simulations. The explicit finite element software PAM-CRASH is employed to conduct bird strike simulations, and a coupled Smooth Particles Hydrodynamic (SPH) and Finite Element (FE) method is used to simulate the interaction between a bird and a target structure. The SPH method is explained, and an SPH bird model is established. Constitutive models for various structural materials, such as aluminum alloys, composite materials, honeycomb, and foam materials that are used in aircraft structures, are presented, and model parameters are identified by conducting various material tests. Good agreements between simulation results and experimental data suggest that the numerical model is capable of predicting the dynamic responses of various aircraft structures under a bird strike, and numerical simulation can be used as a tool to design bird-strike-resistant aircraft structures.     

Fatigue life research and experimental verification of superalloy thin-walled structures subjected to thermal-acoustic loads

Rapid alternating stress is formed in structure subjected to harsh thermal-acoustic loads, which will affect fatigue performance and reduce fatigue life seriously. First, fatigue experiment of superalloy thin-walled structure was carried out to obtain fatigue damage location and failure time of the experiment specimen, and S-N curves of superalloy thin-walled structure at 723 K were fitted. Then, dynamic response simulation of superalloy thin-walled structure under the same load as experiment was implemented, and fatigue life was estimated based on the fatigue life prediction model which mainly included: improved rain-flow counting method, Morrow average stress model and Miner linear cumulative damage theory. Further, comparisons between simulation solutions and experimental results achieved a consistency, which verified the validity of the Fatigue Life Prediction Model (FLPM). Moreover, taking a rectangle plate as the analysis object, the distributions of Fain-low circulation blocks and damage levels of the structure were discussed respectively. Finally, current research indicates that in pre-buckling the structure is in softened area and fatigue life decreases with the increase of temperature; in post-buckling the structure is in hardened area and fatigue life increases with the increase of temperature within a certain range.     

基于Kriging形函数的线性时变结构模态参数辨识

近年来,对航空航天飞行器随时间变化的动力学特性研究需求越来越迫切。仅输出参数化时域的时变时间序列模型以其结构简约、精度高且跟踪能力强而成为研究热点,尤其是泛函向量时变自回归(FS-VTAR)模型已经得到了广泛应用。然而传统的FS-VTAR模型在保证其辨识优势的同时却需要针对不同时变结构选择合适的基函数形式及较高的基函数阶数,该过程相当复杂且耗时。本文借鉴无网格法中移动最小二乘(MLS)法构造形函数的思想,提出一种基于Kriging形函数的线性时变结构模态参数辨识方法。该方法首先引入自适应于辨识信号的Kriging形函数;再把时变系数在形函数上线性展开,利用最小二乘(LS)法得到形函数的展开系数;最后把时变模型特征方程转换为广义特征值问题提取出模态参数。利用时变刚度系统非平稳振动信号验证该方法,结果表明:基于Kriging形函数的FS-VTAR模型相比于传统的FS-VTAR模型能有效地避免基函数形式的选择和较高的基函数阶数,且精度相当;相比于移动最小二乘法能有效地解决其数值条件问题且具有更高的模态参数辨识精度。     

Active vibration control of piezoelectric bonded smart structures using PID algorithm

Thin-walled structures are sensitive to vibrate under even very small disturbances. In order to design a suitable controller for vibration suppression of thin-walled smart structures, an electro-mechanically coupled finite element(FE) model of smart structures is developed based on first-order shear deformation(FOSD) hypothesis. Considering the vibrations generated by various disturbances, which include free and forced vibrations, a PID control is implemented to damp both the free and forced vibrations. Additionally, an LQR optimal control is applied for comparison.The implemented control strategies are validated by a piezoelectric layered smart plate under various excitations.     

Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

柔性空间结构选频二阶保结构平衡降阶

利用传统的一阶选频内平衡降阶方法进行降阶时,不但破坏了原二阶系统动力学结构,而且降阶过程中的选频Gramian矩阵的求解计算量大、数值稳定性差.利用解耦模态坐标的二阶柔性空间结构(FSS)方程的特殊性,给出了可控和可观Gramian矩阵的选频闭合解析解.为了将FSS动力学模型在指定频段进行降阶并保留原系统的二阶动力学结...     

带滑移滞变系统的三阶段逐步收敛的识别方法

针对非线性带滑移滞变系统模型复杂，参数多，识别时收敛困难等问题，提出了一种三阶段逐步收敛的识别方法对Baber与Noori提出的带滑移滞变模型进行了参数识别。计算实例表明，该方法具有收敛速度快、且容易收敛的特点，对于参数较多、模型复杂的系统，是一种非常有效的参数识别方法。