热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

Height-latitude structure of stationary planetary waves in the stratosphere and lower mesosphere

Daily UK Met Office stratospheric assimilated data for the Northern and Southern Hemispheres, accumulated for the period from 2004 to 2012 and pressure range of 1000–0.1 hPa, are used in this paper. The paper presents and thoroughly discusses spatial–temporal distributions of stationary planetary wave (SPW) amplitudes and phases, calculated on the basis of geopotential height, temperature, zonal and meridional wind data for zonal wave numbers 1 and 2 (SPW1 and SPW2). The climatological planetary wave amplitudes and phases are calculated by extracting waves from three types of data: daily, monthly mean and climatological monthly mean. It has been established that magnitude of amplitudes and height-latitude distribution of amplitudes of SPW1 and SPW2 depend on data processing method for all parameters. It has also been established that height-latitude distribution amplitudes and phases significantly differ for geopotential height, temperature, zonal and meridional wind and depend on wave number and hemisphere. However, height-latitude distributions of phases are little different from each other for the used methods of data processing.     

低空风切变系统建模及其对直升机飞行安全威胁定性分析

系统地建立了含湍流的三维低空风切变模型，并综合分析了其对直升机飞行安全的威胁。建立了微下击暴流风场及大气湍流场组合的风切变模型，在不增加计算量的前提下，选取特征点发展直升机飞行动力学模型，有效捕捉了风切变的切变特性，提高了在风场中的动态响应计算精度。模型配备姿态保持功能的控制增稳系统已符合一般直升机的飞行状态，并改善机体响应。根据风速分布的特点，选取不同飞行速度、不同风场位置进行飞行仿真，定性地对比分析状态量变化与风场对应关系，并且以垂向通道为例，从动力学角度分析验证了响应的理论计算表达式。结果表明：湍流主要导致高频姿态角响应，风切变对飞行状态量变化占主导作用，且垂向风是引起威胁的主要因素，据此提出危险风场规避建议。     

Loop Models from SOHO Observations

The Coronal Diagnostic Spectrometer (CDS) on SOHO is a grazing/normal incidence spectrograph, aimed to produce stigmatic spectra of selected regions of the solar surface in six spectral windows of the extreme ultraviolet from 150 Å to 785 Å (Harrison et al. 1995). In the present work, CDS, EIT, MDI and Yohkoh observations of active region lops have been analyzed. These observations are part of JOP 54. CDS monochromatic images from lines at different temperatures have been co-aligned with EIT and MDI images, and loop structures have been clearly identified using Fe XVI emission lines. Density sensitive lines and lines from adjacent stages of ionization of Fe ions have been used to measure electron density and temperature along the loop length; these measurements have been used to determine the electron pressure along the loop and test the constant pressure assumption commonly used in loop modeling. The observations have been compared with a static, isobaric loop model (Landini and Monsignori Fossi 1975) assuming a temperature-constant heating function in the energy balance equation. Good agreement is found for the temperature distribution along the loop at the coronal level. The model pressure is somewhat higher than obtained from density sensitive line ratios.     

基于薄膜热电堆的新型高温瞬态热流密度传感器的研制

目前针对国内薄膜瞬态热流传感器一致性较差、制备工艺不成熟等问题，提出了一种基于光刻工艺和离子束溅射镀膜工艺的制备方法，200对T型金属薄膜热电偶沉积在10mm×10mm的水冷块上，测量1μm的氧化铝热阻层温差，从而得到瞬态热流密度值。对新型高温瞬态热流密度传感器进行比对法标定，一致性误差为0.211%，即工艺的一致性约为99.79%。实验表明，研制的新型高温瞬态热流密度传感器的一致性好,制备工艺具备良好重复性和可移植性，能够满足高温瞬态热流检测需要，为热流传感器的推广应用及标准化、批量化生产提供了良好的技术支撑。     

Atmospheric Ion-induced Aerosol Nucleation

Ion-induced nucleation has been suggested to be a potentially important mechanism for atmospheric aerosol formation. Ions are formed in the background atmosphere by galactic cosmic rays. A possible connection between galactic cosmic rays and cloudiness has been However, the predictions of current atmospheric nucleation models are highly uncertain because the models are usually based on the liquid drop model that estimates cluster thermodynamics based on bulk properties (e.g., liquid drop density and surface tension). Sulfuric acid (H₂SO₄) and water are assumed to be the most important nucleating agents in the free troposphere. Measurements of the molecular thermodynamics for the growth and evaporation of cluster ions containing H₂SO₄ and H₂O were performed using a temperature-controlled laminar flow reactor coupled to a linear quadrupole mass spectrometer as well as a temperature-controlled ion trap mass spectrometer. The measurements were complemented by quantum chemical calculations of the cluster ion structures. The analysis yielded a complete set of H₂SO₄ and H₂O binding thermodynamics extending from molecular cluster ions to the bulk, based on experimental thermodynamics for the small clusters. The data were incorporated into a kinetic aerosol model to yield quantitative predictions of the rate of ion-induced nucleation for atmospheric conditions. The model predicts that the negative ion-H₂SO₄-H₂O nucleation mechanism is an efficient source of new particles in the middle and upper troposphere.     

损耗大气中随机重力波场的传输方程

从包含分子粘性的非线性相互作用方程出发, 采用随机相位近似, 推导了损耗大气中重力波场的非线性传输方程。由于分子损耗的引入, 谱演变的速率发生了改变, 在某些情况下, 还会得到与无耗条件下的传输规律相反的结论。损耗大气中重力波场的传输方程是研究中高层大气重力波能量收支平衡的出发点。      

高层大气及其预报研究对航天飞行的重要性

简述控制高层大气的主要能源和描绘了高层大气的主要天气变化过程,并且阐明高层大气及其预报研究的量要性和给出高层大气对航天飞行有严重影响的几个实例,最后简介高层大气及其预报研究的新动向。     

基于木星大气环境的降落伞系统气动特性研究

木星探测是未来行星探测的重要发展方向,而降落伞是进入木星大气探测必不可少的气动减速装置。文章基于“伽利略号”探测任务,设计了满足未来木星探测需求的降落伞系统简化模型,并针对该降落伞系统进行了数值模拟,研究了木星大气和地球风洞实验环境中不同来流马赫数下降落伞系统的复杂流动现象及气动力变化规律。在木星大气环境中,降落伞的阻力系数和横向力系数大小以及横向力系数波动幅度均高于风洞试验环境,阻力系数波动幅度均低于风洞实验环境。此外,还研究了木星大气环境中不同来流攻角下降落伞系统的气动特性。研究表明,木星大气环境中降落伞系统气动特性与风洞实验结果有差异,因此未来在设计用于木星探测的降落伞系统时,应考虑由于木星大气环境对降落伞系统气动特性的影响。     

薄片状聚酰亚胺多孔材料的研究进展

综述了薄片状聚酰亚胺多孔材料的研究进展,主要介绍了薄片状的聚酰亚胺多孔材料的产品种类、研究单位、性能指标、应用情况及制备方法,并提出了目前对薄片状聚酰亚胺多孔材料研究存在的问题以及研究现状,展望了薄片状聚酰亚胺多孔材料在今后的研究方向和发展趋势.薄片状聚酰亚胺多孔材料,已经作为垫片用在宇宙飞船的多层隔热系统中,甚至会逐渐替代传统的多层隔热系统材料.