含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Three dimensional temperature field in a conducting sphere due to an arbitrarily located split ring heating source

Thermal control of spacecrafts plays an important role in space missions. In the design stage the preliminary thermal analysis of the spacecraft requires an estimate of the conductive thermal resistance between the various spacecraft components. With this in mind, the fully three dimensional problem of determining the thermal field in a conducting sphere with an asymmetric split ring current carrying heating source is resolved in an analytical or almost analytical form, implying either a closed form solution or utmost expressions involving a simple numerical integration. This has immediate application for evaluation of thermal resistance in spacecrafts. Green's function integral techniques are used. Comparisons are made with series solutions and also with purely numerical solutions to contrast the simplicity and highlight the elegance of the present method. Parametric studies reveal expected behavior.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

光电自准直仪自适应光源设计方法研究

介绍了一种自适应光源设计方法。利用反馈原理自动校正自准直光源参数,调节发光强度,降低了自准直仪对反光面、使用环境的苛刻要求,提高了仪器的环境通用性及测量精度。     

基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩

基于干涉多光谱图像特点和应用环境要求,提出一种基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩算法。编码端通过关键帧预测出边信息帧,然后联合估计的边信息帧和插值分布的概率模型在编码端进行比特平面码率估计,最后采用基于率失真提升的感兴趣区域编码,调整图像不同区域的率失真斜率来进行更合理的码率分配。实验结果表明,该算法比传统算法更好地保护了多光谱图像的光谱信息。在不同压缩比的情况下,这种编码方式在干涉多光谱图像压缩系统中可获得较好的效果,算法复杂度低。     

HOTDISK在低导热材料测试中的重复性分析

HOTDISK在工程材料导热系数测试中有着广泛应用。通过用HOTDISK对气凝胶粉体、保温毯和保温绝热板的测试,对比了不同时间段测试结果的波动情况,根据数据波动规律给出了测试过程中需要注意的事项和相应的改进建议。     

小卫星最佳温度动态范围热控设计方法研究

为探索低热惯性小卫星动态传热下的热控设计方法,首先建立双层集总参数模型,在得到温度时均量解析解的基础上,类比阻尼振荡系统,采用傅里叶变换法求解温度波动量解析解,从而建立周期变化外热流下温度动态变化与热控参数间的解析关系。以此为基础提出“最佳温度动态范围”热控设计新方法。对某型微小卫星进行“最佳温度动态范围”热控设计,并通过其在轨温度遥测量动态变化对该方法的准确性和可行性进行验证。     

3D-Cf / Mg 复合材料的热残余应力研究

采用随动硬化有限元模型,研究了三维碳纤维增强镁基复合材料(3D-Cf/Mg)基体热残余应力的大小、分布以及不同工艺处理对热残余应力的影响。同时,对复合材料进行了高、低温处理,利用XRD定性分析了处理前后复合材料基体热残余应力的变化。计算结果表明:经过-196℃低温处理后,复合材料基体的平均Mises热残余应力由169.06 MPa减小至55.29 MPa;高温处理后,基体平均热残余应力几乎不变。该结果与实验结果吻合,证明了低温处理能明显降低复合材料基体的热残余应力。     

噪声源校准方法及不确定度分析

噪声系数测量的一个关键指标就是测量不确定度,测量时所用的噪声源是引起噪声系数测量不确定度的一个明显因素。噪声源的精确校准可以有效地降低噪声系数的测量不确定度,因此它是获得高质量的噪声系数测量的关键因素。介绍了两种对微波和毫米波噪声源超噪比进行校准的方法,分别是Y因子法和增益法,并全面分析了引起校准不确定度的因素。