基于盲源分离技术的航空发动机振动信号分析

基于双转子航空发动机机匣拾取振动信号特征的分析,采用基于数学形态学滤波前处理的盲源分离识别方法进行特征提取.针对机匣拾取振动信号的特征,利用开—闭和闭—开组合数学形态滤波器在保留信号基本形状的前提下,滤除掉原始信号中的噪声分量.利用Fast ICA算法恢复高、低压转子源振动信号的波形.对实测数据的分析表明,该方法能够较好地恢复高、低压转子所激振动信号的频域结构信息,有利于提高故障定位的准确性.     

星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

空间相机热平衡试验温度预测方法改进及应用

为实现对航天器热平衡试验平衡温度的预测,建立了热平衡温度预测的方程式,对影响预测结果的各参数进行了分析。首先,由节点网络法推导出平衡温度表达式,介绍了其基于非线性最小二乘法的求解过程,建立了平衡温度的迭代方程;其次,结合大量的试验数据,对影响迭代结果的3个因素进行了统计分析,并最终确定了各因素的合理取值范围;最后,利用温度预测程序对某空间相机热平衡试验中低温工况的平衡温度进行了预测,并与试验结束后的结果进行了对比。结果表明,预测温度与试验数据的误差为±1℃（在3%之内）,满足精度要求,对热平衡温度准确的预测有效的缩短了试验时间,节省试验费用。     

新型电子束焊机阴极加热电源自动调节系统

开发了一种新型电子束焊机阴极加热电源自动调节系统,包括新型主电路拓扑和对应控制策略,该系统能够使阴极处在最佳加热电流状态,从而提高电子束流稳定性.并且在检测到电子枪未加高压时,阴极加热电流自动关闭,在加有高压但束流给定为零时,阴极加热电流自动减少,能大幅增加阴极的使用寿命.经试验证明该系统相比传统阴极加热电源操作简洁、快速和准确,对焊缝成形质量好.     

Development of thermal sensors and drilling systems for lunar and planetary regoliths

We consider some novel concepts for thermal properties experiments aboard lunar landers or rovers, that may lead to an improved understanding of both the structure of the lunar near surface layers and the lunar thermal history. The new instruments could be developed using the experience and heritage from recently developed systems, like the Rosetta Lander thermal conductivity experiment MUPUS and existing designs used for terrestrial measurements of thermal conductivity. We describe shortly the working principle of such sensors and the main challenges faced when using them in the airless regolith layers of the Moon or other airless bodies. In addition new concepts to create appropriate drill holes for thermal and other measurements in the lunar regolith are discussed.     

平面-抛物面型薄膜天线形面及温度分析

为了解决星载天线的大口径与运载工具整流罩有限体积, 以及星载天线的重量与卫星平台和运载工具承载能力之间的矛盾, 充气可展开结构技术是非常理想 的选择. 为实现高精度反射面, 针对平面-抛物面型充气可展开天线反射面, 进行弹性力学分析, 得到反射面与充气气压、薄膜材料、边界条件之间的关系, 以及形 面和抛物面间存在的M形误差. 在此基础上, 探讨了天线在轨时温度变化对反射面 形面的影响, 提出了消除这种影响的两种方法. 利用ANSYS分析结果对理论解进行验证, 结果吻合.      

抽屉式标准机柜地面通风换热性能的研究

通过抽屉式标准机柜通风换热性能的地面实验研究和数值模拟,分析了在侧进上出和下进上出两种方式下,进风流量、风道通风孔宽度及自然对流对机柜地面通风换热性能的影响。结果表明,在一定范围内增加机柜进气流量和减小通风孔尺寸可改善机柜通风换热性能。此外,对于本文所研究两种进出风口布置方式,在相同的参数状态下,机柜在微重力状态下的通风换热性能优于地面状态或者相当,因此,满足标准机柜地面状态换热要求的设计参数也会满足微重力状态的换热要求。     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

改进FDTD／集总源模型分析航天器场线耦合

针对典型的电磁脉冲对航天器电缆耦合问题,建立了航天器场线耦合分析模型。在场分布计算方面,采用基于平均电参数和分析目标与 Yee网格不重合的边缘部分修正的改进时域有限差分法。在场线耦合方面,建立基于集总等效源模型的多导体传输线瞬态响应模型,将外场在传输线上激励的分布电压源和电流源与传输线指数矩阵解耦,建立了集总等效电压源和电流源模型。采用分析模型分析运载内一根电缆受电磁脉冲影响的响应,结果表明,即使存在屏蔽作用,电磁脉冲在电缆上耦合的干扰足以损毁设备。     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.