二维喷管的初始流动

基于可压缩Navier-Stokes方程,采用大涡模拟方法与高精度混合WENO/TCD格式,对Ma=1.4的超声速平面射流初始流场进行了数值研究.数值结果清晰地描述了超声速平面射流初始流场的结构特征,包括主涡环与激波结构以及它们演变过程.因主涡环内存在涡导激波对,激波与涡相互作用加速射流剪切层失稳,使剪切层首次卷起形成小涡的位置出现在涡导激波对后,此与亚声速射流情况不同.小涡串卷起成后,相继与涡导激波对相互作用,使激波出现明显的变形并加速主涡环失稳.      

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

含金属相变材料温控组件的研究

研究使用一种含有金属相变材料（Phase Change material,PCM）的温控组件（Thermal Control Component,TCC）对航天器上的有效载荷进行温度控制。通过对载荷的温控需求分析,设计并制备了以Ga-Sn合金为PCM的TCC,并通过地面模拟实验对TCC的温控性能进行测试。实验结果表明这种含有Ga-Sn合金的TCC满足载荷的温控需求。最后在仿真软件中建立了TCC的相变传热仿真模型用于预测TCC的温控性能。结果表明：仿真模型计算所得结果与实验结果基本一致,可用于预测TCC的温控性能。     

复合喷管结构温度场流固耦合仿真分析

为了评估复合喷管热防护性能以及获取喷管烧蚀和结构应力分析的工况条件,运用Fluent流体动力学软件,对复合喷管的结构温度场进行了数值仿真。分析中,采用了两方程RNG k?ω湍流模型和增强型壁面函数,利用流固耦合的计算方法,获得了喷管结构瞬态温度场的计算结果,重点分析了结构温度场最终分布状态和初期传播特点,以及喉衬温度随时间的变化规律,估算了喉衬的烧蚀。分析结果表明,喷管结构热防护性能满足要求,温度最高区域位于喷管收敛段中后部,喉衬线烧蚀量约为2．1 mm,为喷管结构进一步优化设计提供了重要参考依据。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

"伙伴交际法"在高职英语教学中的应用

口头表达能力作为语言综合能力的重要体现之一,在教学中应受到高度重视。然而在我国传统的公共英语教学中,“轻听说、重读写”的倾向造成了不少学生渎写尚可,但张口即结舌的状况。笔者将“伙伴交际法”应用到教学实践中,有效地提高口语教学质量,值得推而广之。     

小卫星最佳温度动态范围热控设计方法研究

为探索低热惯性小卫星动态传热下的热控设计方法,首先建立双层集总参数模型,在得到温度时均量解析解的基础上,类比阻尼振荡系统,采用傅里叶变换法求解温度波动量解析解,从而建立周期变化外热流下温度动态变化与热控参数间的解析关系。以此为基础提出“最佳温度动态范围”热控设计新方法。对某型微小卫星进行“最佳温度动态范围”热控设计,并通过其在轨温度遥测量动态变化对该方法的准确性和可行性进行验证。     

立楔诱导高超声速分离流动的被动控制研究

双模态超燃冲压发动机由于压力扰动可能发生不起动现象,造成推力严重下降,对飞行稳定性与飞行安全具有很强的破坏性.不起动初始阶段主要受到激波与边界层相互作用引起的流动分离影响,希望通过控制分离达到改善流动的目的.采用5阶特征型WENO(weighted essentially non-oscillator)格式与3阶TVD(total variation diminishing)型Runge-Kutta(R-K)格式的高精度数值方法,求解三维Navier-Stokes(N-S)方程,研究与分析了凸起物和被动吹吸两种被动控制方法对激波与边界层相互作用导致的高超声速流动分离现象的控制效果.结果表明:凸起物通过诱导流向涡形成,改变空间压力分布,减弱二次分离,影响分离结构;吹吸方式的被动控制技术通过平衡分离区与再附区之间的高低压差,降低逆压梯度,使压力分布与分离区域发生改变.      

流固耦合数据交换的插值精度影响因素研究

提出了一种投影-形函数插值的新方法,用发展了三维线性插值方法。又包括使用优化插值和常体积转化等6种插值方法,从表征多种不同网格质量和待插值函数值情况的角度,进行了插值精度验证的应用研究,探索了网格质量和待插值函数值对插值精度的影响程度。研究结果表明,投影-形函数插值方法的效果很好;流/固的网格质量及其匹配状况在很多情况下对插值精度的影响要远大于插值方法本身。