基于EFPI-FBG结构的光纤复合传感器研究

研究了一种基于非本征型Fabry-Perot干涉仪(EFPI)和光纤Bragg光栅(FBG)串联结构构成的EFPI-FBG光纤复合传感器,用于实现对压力和温度信号的同步测量。传感器选用熔融石英作为压力敏感材料,利用飞秒激光焊接技术实现传感器探头结构的封装。对传感器的工作原理进行了分析,制作并封装传感器工程样机,搭建测试系统,对传感器的性能进行了灵敏度及交叉敏感性分析。结果表明,该传感器在0.8 MPa范围内的灵敏度约为-0.729μm/MPa,在50℃~200℃范围的温度灵敏度为0.009 nm/℃,传感器压力测量最大允许误差为±4.12%FS。该EFPI-FBG复合传感器有望应用于压力—温度双参数测量需求的技术领域。     

PGE/ Phenolic 的动态热解对温度场计算的影响

通过建立材料动态热解情况下的非稳态导热微分方程,研究了PGE/ Phenolic 的动态热解对温度 场计算的影响,并将理论计算值与地面试验的实测值进行了对比分析。结果表明,对PGE/ Phenolic 考虑动态 热解能有效修正温度场计算的精度,使理论计算值与实测值更为接近。     

高精度数字温度计替代标准水银温度计的探讨

用基于工业铂电阻的高精度数字温度计替代标准水银温度计，是当今温度计量的一个研究热点。迄今为止这类产品只能作为工作器具使用，其主要原因是对高精度数字温度计的长期稳定性研究还不充分。介绍了一款高精度数字温度计长达8年的稳定性研究成果，并和标准水银温度计比较，说明用高精度数字温度计替代标准水银温度计是完全可行的观点，同时提出一些具体建议。     

Slip boundary conditions for rough surfaces

The velocity slip and temperature jump for a two-dimensional rough plate under hypersonic conditions were analyzed using the Direct Simulation Monte Carlo (DSMC) method. Surface roughness was explicitly modeled by introducing various structures on the flat plate. The influences of relative roughness height, which involves the roughness height, roughness spacing, incoming velocity, and the degree of rarefaction, were analyzed and discussed. It is found that with the increase of the relative roughness height, the jump temperature increases, while the slip velocity decreases gradually. The effects of surface roughness on the slip coefficients can be attributed to the change of accommodation coefficients. A new slip model for rough surfaces was established in this paper, which accounts for the coupling effects of gas rarefaction and surface roughness, without the effort to model the surface roughness explicitly. The nitrogen flows in the microchannel, and flows over a blunt cone and an axisymmetric bi-conic body, were simulated under the modified and conventional slip boundary conditions, respectively. The numerical solutions were validated with experimental data. It can be safely concluded that compared with the traditional first-order slip boundary conditions, the modified slip model improves the accuracy of macroscopic properties, especially the heat transfer coefficient.     

舰船现场计量校准环境模拟装置研究

针对原有舰船装备技术状态的压力和电工类仪器仪表计量时，因所处环境较恶劣，存在温湿度、电磁环境、振动等参数不能满足要求而无法开展计量校准工作的问题，设计了一种基于舰船现场计量校准环境的模拟装置。该装置由环境控制和校准操作两部分组成，重点研究了高温环境下的恒温、恒湿技术，以及分体式校准舱结构设计，实现了微环境的自动调节与控制，通过性能试验，证明了校准舱的温度波动度和均匀度均符合设计指标，能够解决现场计量校准的环境条件保障问题。     

一种MEMS陀螺仪零偏建模与估计方法

针对MEMS陀螺仪零偏随时间变化的问题,提出了一种MEMS陀螺仪的零偏建模与估计方法.通过分析静态条件下陀螺仪零偏变化的影响因素,建立了陀螺仪零偏和温度之间的差分方程模型.采用系统辨识的方法,给出了系统模型的参数辨识流程.基于最小二乘法,实现了模型参数的辨识.设计了测试验证试验,基于陀螺仪的零偏样本特性建立了三阶差分方...     

Novel orbit-attitude combination mode for solar power satellites to reduce mass and fuel

Solar power satellite receives great attention because it can release the energy crisis and environmental problems in the future. However, the launch and maintenance costs are tremendous due to the large system mass and large fuel consumption to counteract space perturbations. To reduce mass and fuel, a novel quasi-Sun-pointing attitude in Sun-frozen orbit is proposed. The Sun-frozen orbit has a nonzero eccentricity vector that always points towards the Sun. The quasi-Sun-pointing attitude is a periodic solution of the Sun-pointing attitude angle. Although about 3 % electricity must be given up because of the variation of Sun-pointing attitude angle, little control action is required to deal with the solar radiation pressure and gravity-gradient torque. The algorithm to obtain initial conditions is proposed. The influences of system parameters and structural flexibilities are studied. Simulation results reveal that the quasi-Sun-pointing attitude in Sun-frozen orbit dramatically reduce fuel consumption, the dry mass, and complexity of the control system. In addition, structural vibration is hardly induced by the gravity-gradient torque. Thus, the bending stiffness as well as the mass of the supporting structure can be reduced.     

石英谐振加速度计振梁内部热应力的抑制方法研究

石英谐振加速度计具有抗干扰能力强、准数字输出和易于集成等优点，但温漂成为了制约其稳定性指标的关键因素。本文通过全石英无异质材料设计和热应力隔离结构方案有效抑制加速度计振梁内部产生的热应力。传感器敏感结构由惯性质量块、铰链、固定基底和微谐振器组成，均采用石英晶体材料制备，且两个微谐振器呈差动布置可以通过差分对振梁内热应力进行部分抑制。通过微谐振器的四边形框架设计可以将工作环境中产生的热应力与振梁隔离，再对固定基底上的热应力敏感部分进行拓扑优化设计来抑制工作时从固定锚点处传递至振梁内部的热应力。本文对石英谐振加速度计进行了全温度下的有限元仿真计算分析，工作环境温度从室温到75 ℃，微谐振器振梁内部产生的热应力经优化后减少了99.41%以上。     

Detection of surface temperature anomaly of the Sea of Marmara

Monitoring sea surface temperature (SST) over a long-term and detecting the anomalies highly contribute to understanding the prevailing water quality of the sea. Earth observation satellite images are the key data sources that offer the long-term SST detection in a cost and time effective way. Since the Sea of Marmara in Türkiye is surrounded by the highly populated provinces, the water quality of the sea has gained importance for scientific and public communities over the years. This article emphasizes on the significance of detecting SST trend and corresponding anomalies of the Sea of Marmara over the past 32 years. To address the SST variations of the Sea of Marmara in time, a comprehensive set of both field and satellite data regarding SSTs were obtained within the context of this study. The SST trend and its anomalies between the years 1990 and 2021 were detected by applying Seasonal-Trend decomposition procedure based on LOESS (STL) method to NOAA OISST V2 data. On the other hand, spatial SST distribution was detected with Landsat-8, Sentinel-3 and NOAA OISST V2 satellite data. SST results were verified with the in-situ data within the scope of accuracy assessment. The results showed that SST time-series data performed an increasing trend and had anomalies mostly during the spring months in the recent years.     

碳纤维复合材料钻削温度测试与分析

利用热像仪对碳／环氧复合材料高速钻孔时的钻削温度及温度场分布进行了系统的试验研究。实验结果显示,钻削热主要是由刀具后刀面与已加工表面之间的摩擦产生的。转速越高,钻削温度赵高;进给量越大,钻削温度越低,但钻削温度一般不超过环氧树脂的玻璃化转变温度。