参量型空气折射率传感系统

本系统分别利用传感器测出空气的温度、气压和湿度三个参量,把测量值用一个通用于不同机型的接口电路连接到微机进行数据处理并计算出空气折射率值。文中叙述了传感器及其检测电路的设计原理,给出了检测和接口电路框图、计算公式和程序流程图。整个系统已通过联机调试和初步的对比试验。     

基于SPCE061A数字语音温度控制系统的设计

以凌阳SPCE061A单片机为控制核心,设计并制作了一款具有温度设定灵活、数字显示及语言播报功能的水温控制器,通过PID控制算法产生脉宽调制波,提高了控制精度。实践表明:该水温控制器达到了设计要求,有一定的实用开发价值。     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.     

复合材料构件热压罐成型温度场研究

在热压罐固化工艺的热历程中,复合材料零件表面温度场分布的合理与否将直接决定产品的固化质量.以工字型零件和T型加筋壁板两种复合材料零件为研究对象,使用EC-3×8M和SCH-5.5×21M两种型号热压罐,同时选择炉温偶和零件偶两种控温方式对零件进行固化.通过分析温度场测试结果发现,控温方式、设备加热方式、升降温速率、热电偶的摆放位置、固化压力等因素均对零件的温度场有影响.     

TC4钛合金静止轴肩和传统搅拌摩擦焊的温度场对比

基于有限元软件ABAQUS对6mm厚的TC4钛合金传统及静止轴肩搅拌摩擦焊温度场进行了有限元模拟.结果表明,对比传统搅拌摩擦焊接,静止轴肩搅拌摩擦焊接具有较小的高温区,前进方向上具有较大的温度梯度,厚度方向上呈现柱状椭球形分布,上、下表面温度峰值差异较小,具有重叠性较好的热循环曲线.     

基于Fibonacci搜索方法的航空发动机性能寻优

介绍了Fibonacci搜索方法应用于发动机性能优化中的原理,建立带两个出口面积、气流马赫数可变的引射器的涡喷发动机的总体性能计算模型,应用Fibonacci搜索方法在优化参数区间内对该发动机进行了最大推力、最低油耗、最低涡轮前温度模式的寻优.举例说明了Fibonacci搜索方法应用的具体过程.给出了不同高度、马赫数下的寻优结果.结果表明:最优目标性能满足的约束边界与飞行高度、马赫数密切相关.不同的飞行高度、马赫数对应了不同的最优控制策略.但不论飞行任务如何,根据该方法进行的优化控制所获得的目标性能是最佳的.该优化方法不仅适用于该类涡喷发动机,也为其他类型航空发动机的优化控制打下一定的基础.      

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal’s sealability. The expansion coef-ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro-vide guidance for the study of sealing mechanism of metal rubber seals.     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.