飞机维修训练成本的系统动力学分析

以飞机维修训练成本为研究对象,首先分析了成本产生的因果关系;然后绘制存量流量图,建立存量、流量、辅助变量、常量之间的关联方程并确定其初始值;在确定模型合理的基础上,分析模型的计算结果。分析结果表明本仿真方法具有一定的实用性。     

A real-time ionospheric model based on GNSS Precise Point Positioning

This paper proposes a method of real-time monitoring and modeling the ionospheric Total Electron Content (TEC) by Precise Point Positioning (PPP). Firstly, the ionospheric TEC and receiver’s Differential Code Biases (DCB) are estimated with the undifferenced raw observation in real-time, then the ionospheric TEC model is established based on the Single Layer Model (SLM) assumption and the recovered ionospheric TEC. In this study, phase observations with high precision are directly used instead of phase smoothed code observations. In addition, the DCB estimation is separated from the establishment of the ionospheric model which will limit the impacts of the SLM assumption impacts. The ionospheric model is established at every epoch for real time application. The method is validated with three different GNSS networks on a local, regional, and global basis. The results show that the method is feasible and effective, the real-time ionosphere and DCB results are very consistent with the IGS final products, with a bias of 1–2 TECU and 0.4 ns respectively.     

半开式富氧补燃混合循环发动机方案研究

针对未来航天主发动机的应用需求,提出了一种燃料供应系统采用开式循环、氧化剂供应系统采用分级燃烧闭式循环的半开式富氧补燃混合循环发动机系统方案,综合分析了这种新型混合循环发动机所能达到的比冲性能,对比分析了新型混合循环发动机作为可重复使用航天运载器主发动机相比于开式循环和常规补燃循环、全流量补燃循环发动机的优缺点,针对推...     

无线电外弹道测量设备轴系误差修正方法改进

对无线电外弹道测量设备轴系误差的性质进行分析,论述了传统轴系误差修正方法的缺点,采用坐标系转换的原理,推出了一种轴系误差的精确修正方法。对各种误差项进行分离,将传统的轴系误差修正方法改进为实时快速修正方法,并利用实际标定的误差数据,仿真计算不同修正方法的修正效果,验证了轴系误差精确修正方法的正确性,验证了实时快速修正方法的正确性和快速性。     

天琴一号卫星加速度模式无拖曳控制

结合卫星加速度模式无拖曳控制系统一般组成、各环节典型模型、常见控制器及天琴一号空间惯性基准建立试验卫星的采样周期与控制周期,着眼于工程实际问题的挖掘与解决,重点阐述了该卫星CIC滤波器组频响特性等效、加速度模式无拖曳控制系统稳定裕度及残余加速度指标分析与综合等技术内容。研究表明,多周期离散系统真实稳定裕度难于准确预测;积分系数是决定PSD指标的关键参数;抗混淆滤波器是提升时域残余加速度指标的关键环节,且有利于抑制高频数据在PSD低中频段的高频折叠;在未引入抗混淆滤波器的情形下,频域指标统计应以进入控制器的残余加速度数据为准。在轨飞行试验结果与仿真结果基本吻合。     

Novel attitude determination method by integration of electronic level meter,INS, and low-cost turntable for level attitude evaluation and calibration of INS

Attitude references are greatly needed for the evaluation and calibration of Inertial Navigation Systems (INSs), which are widely used in gravimeter, marine, and aeronautical navigation. High-accuracy turntable, INS, and Global Navigation Satellite System have been utilized to verify the performance of relatively low-accuracy INS. The accuracy requirement of the attitude reference continuously increases with the rapid improvement of inertial sensors and navigation algorithms. However, the cost of attitude determination system increases rapidly with the increase of attitude accuracy requirement. To solve this limitation, the integration of level meter, INS, and low-cost turntable is proposed to provide level attitude, such as roll and pitch. The turntable is utilized to rotate the INS. An integration model of the level meter and INS is built to estimate the level attitude and reduce the cost of the turntable. The proposed method successfully avoids the dependence on high-accuracy turntables. An observability degree analysis is conducted to improve the level attitude accuracy further. The simulation and turntable test results indicate that the proposed method can provide high-accuracy level attitude without high-accuracy INS or turntable and is applicable to error calibration and attitude evaluation of INS.     

Real-time modular dynamic modeling for compression system of altitude ground test facilities

Modeling of a centrifugal compressor is of great significance to surge characteristics and fluid dynamics in the Altitude Ground Test Facilities (AGTF). Real-time Modular Dynamic System Greitzer (MDSG) modeling for dynamic response and simulation of the compression system is introduced. The centrifugal compressor, pipeline network, and valve are divided into pressure output type and mass flow output type for module modeling, and the two types of components alternate when the system is established. The pressure loss and thermodynamics of the system are considered. An air supply compression system of AGTF is modeled and simulated by the MDSG model. The simulation results of mass flow, pressure, and temperature are compared with the experimental results, and the error is less than 5%, which demonstrates the reliability, practicability, and universality of the MDSG model.     

基于北斗空时信息的安全通信方法

随着5G大规模商用和6G研发的启动,天地一体已成为未来移动通信发展的共识,然而空口边界被无限扩大,使无线通信安全面临着前所未有的严峻挑战,我国北斗三号卫星导航系统的全球位置信息服务为安全通信与定位导航的学科交叉提供了可能。提出了一种利用用户空时信息进行加密的安全通信方法,该方法是一种利用位置和时间唯一性的加密技术,通过北斗卫星导航系统的定位授时服务获取用户的空时信息,基于短报文业务实现信息共享,在传统加密算法的基础上提供额外安全层。该方法在密钥生成阶段提出了一种基于MD5信息摘要结合Logistic混沌映射的密钥生成算法(MD5-Logistic),使加密过程随位置变化而动态更新。仿真结果表明,该算法生成的密钥具有较高随机性,且有效降低了生成密文与明文间的相关性。在此基础上,为提升对定位误差的容忍能力,引入容忍距离概念,将解密范围从一点扩大为一个区域,使系统的鲁棒性及实用性得到显著提升。最后通过实测得到通信成功率与容忍距离间的关系,并给出合适的容忍距离。     

驾驶舱仿真仪表显示系统设计

以某型民用飞机为背景,阐述了飞控系统功能验证的重要性以及驾驶员在环试验对飞控系统功能的验证作用。在此基础上,介绍并设计了作为驾驶员在环试验重要评定依据的驾驶舱仿真仪表显示系统。此系统利用VC＋＋6.0和OpenGL编程工具的核心优势,同时采用VMIC实时网通讯保证了仿真仪表显示的实时性。并通过驾驶员在环试验,验证了驾驶舱仿真仪表显示系统的实时性和可靠性,能够满足飞机地面模拟试验的需求。     

Star angle/ double-differenced pulse time of arrival integrated navigation method for Jupiter exploration

Pulsar navigation is a promising autonomous navigation system for spacecraft, which is applicable to the entire solar system. However, the pulsar’s directional error and the onboard clock error are two types of systematic errors that seriously reduce navigation accuracy. To solve this problem, a star angle/double-differenced pulse time of arrival(SA/DDTOA) integrated navigation method is proposed. Since measurements obtained by observing different pulsars contain the same clock errors, the measurements can be differed to eliminate the common clock error. Then, the pulsar-differenced measurements at neighbor filtering time can be differed to suppress the effect of the pulsar’s directional error on navigation precision. Star angle is used to obtain absolute navigation information, which denotes the angles between the light of sight of Jupiter and that of its background stars. Simulation results demonstrate that the proposed method can eliminate the influence of the onboard clock error and greatly weaken the effects of the pulsar’s directional error. The navigation accuracy is better than the traditional star angle/pulse time of arrival integrated navigation method and star angle/pulse time difference of arrival integrated navigation method. In addition, the navigation accuracy of the SA/DDTOA integrated navigation method is less affected by Jupiter’s ephemeris error. This work greatly reduces the influence of common systematic errors in pulsar navigation on navigation accuracy.