基于二次调节原理的力矩负载模拟器中压力波动的补偿

 基于静液二次调节原理的力矩负载模拟器具有能够连续高速旋转和无多余力矩的特点。在恒压网络中,二次元件的力矩输出与其斜盘倾角成正比,即：如果系统压力出现波动,也将导致输出力矩的波动。导致系统压力变化的原因可能是油源压力脉动,但更主要是负载的变化。为了研究压力波动的影响及补偿,建立了基于静液二次调节原理的力矩负载模拟器,给出了仿真参数,并在此基础之上进行了仿真研究。为了提高力矩跟踪精度,提出利用斜盘倾角传感器和系统压力传感器来进行压力补偿,可有效地将系统压力波动对于力矩输出的影响抑制到20%左右。仿真和试验验证了此补偿方法的有效性。     

一种使用EPROM的时间增益补偿电路

本文简要介绍了医用超声波类仪器的基本原理，分析了超声波类仪器中普遍采用的Ｔ．Ｇ．Ｃ电路的不足。为克服上述电路的不足，本文提出了该电路的一种新的设计方法并在实际中实现了该方法。     

不确定串联非线性系统具有L2增益的鲁棒自适应控制

研究了一类含有未知参数和干扰的串联非线性系统H∞鲁棒自适应控制问题。结合H∞控制和自适应控制，基于李亚普诺夫函数递推设计方法设计了H∞状态反馈自适应控制器，并且得出了控制器的精确解，避免了求解HJI不等式设计控制器的困难。该控制器不仅保证闭环系统ISS稳定，而且使得系统对于所有允许的参数不确定从干扰输入以可控输出的L2增益不大于给定的值。仿真结果表明了所设计的控制器的可行性和有效性。     

ADINA软件在固体发动机设计中的应用

简要介绍了大型结构分析软件ADINA的主要功能、特点、求解过程,以及应用它对某型号发动机药柱进行的轴对称有限元分析.结果表明,ADINA软件应用于固体火箭发动机结构分析是可行的.     

Design for aircraft engine multi-objective controllers with switching characteristics

The aircraft engine multi-loop control system is described and the switching control theory is introduced to solve the regulating and protecting control problems in this paper. The aircraft engine multi-loop control system is firstly described and the control problems are formulated. Secondly, the theory of the smooth switching control is devoted and a new extended scheme for the smooth switching of a switched control system is introduced. Then, for the key technologies of aero-engines switching control, a design algorithm is presented which can determine which candidate controller should be put in feedback with the plant to achieve a desired performance and the procedure to design the aircraft engine multi-loop control system is detailed. The switching performance objectives and the switching scheme are given and a family of PID controllers and compensators is designed. The simulation shows that using the switching control design method can not only improve the dynamic performance of the aircraft engine control system and reduce the switching times, but also guarantee the stability in some peculiar occasions.     

Spacecraft formation-containment flying control with time-varying translational velocity

This paper investigates the problem of Spacecraft Formation-Containment Flying Control (SFCFC) when the desired translational velocity is time-varying. In SFCFC problem, there are multiple leader spacecraft and multiple follower spacecraft and SFCFC can be divided into leader spacecraft’s formation control and follower spacecraft’s containment control. First, under the condition that only a part of leader spacecraft can have access to the desired time-varying translational velocity, a velocity estimator is designed for each leader spacecraft. Secondly, based on the estimated translational velocity, a distributed formation control algorithm is designed for leader spacecraft to achieve the desired formation and move with the desired translational velocity simultaneously. Then, to ensure all follower spacecraft converge to the convex hull formed by the leader spacecraft, a distributed containment control algorithm is designed for follower spacecraft. Moreover, to reduce the dependence of the designed control algorithms on the graph information and increase system robustness, the control gains are changing adaptively and the parametric uncertainties are handled, respectively. Finally, simulation results are provided to illustrate the effectiveness of the theoretical results.     

微波辐射定标场地面接收机通道自校准设计

微波辐射定标场的地面接收机是卫星雷达外定标的主要设备之一，由于整个雷达系统对精度要求很高，因此作为系统外定标的地面接收机，其自身参数的实时校准就显得尤为重要。本文对地面接收机的接收通道设计了一种自校准方案，阐述了其校准原理和校准步骤，并给出了设计实现框图，分析了其中的关键技术。     

垂直攻击型武器末制导系统设计与分析

介绍了垂直攻击型武器末制导段的特点,分析了其制导控制系统的特殊要求。针对常规控制方案的不足,提出侧力板控制方案,推导出一种考虑速度变化的变系数比例导引律,并结合某型号飞行器进行了仿真。结果证明,侧力板控制与变系数导引律明显优于常规控制和常系数比例导引律,完全可以满足垂直攻击型武器在末制导段的要求,该项研究为型号设计提供了具有实际参考价值的结论。     

提高微波辐射计灵敏度研究的综述

介绍影响微波辐射计灵敏度的两个主要因素 :系统增益和本机噪声。围绕这两个影响因素 ,介绍提高辐射测量灵敏度所采取的两种方法 :电的或人工的方法以及软件处理的方法。最后讨论微波辐射计灵敏度研究中存在的问题 ,并指出其今后的发展方向     

微带贴片双频天线研究与设计

微带贴片天线以其馈电方式和极化制式的多样化以及馈电网络、有源电路集成一体化等特点而成为印刷天线类的主角。本论文采用HFSS仿真软件对单馈单层矩形微带贴片天线进行了设计和仿真。此次设计的1．85GHZ和2．45GHZ的双频贴片天线,在两个频点处,反射系数都低于-25dB,输入电阻都约为50欧姆,且电抗很小,达到了良好的匹配效果,辐射场量在两频点处分别约为2dB和4dB,符合小尺寸指标要求。