基于实际切齿方法的螺旋锥齿轮建模与实体设计

基于螺旋锥齿轮副中大轮采用的半滚切法加工原理,提出一种螺旋锥齿轮建模方法,推导出内、外齿顶线方程。应用MATLAB求解齿顶线方程,将结果导入SolidWorks软件生成曲线,基于扫描切除特征得到螺旋齿面,建立了螺旋锥齿轮的三维实体模型。最后通过具体实例说明了实体设计过程。     

CBERS-02星红外数据系统正反扫描行配准方法研究

CBERS-02星搭载的有效载荷有一台是红外多光谱扫描仪（IRMSS），它是摆扫式的相机，与推扫式的CCD相机成像方式不同。摆扫式IRMSS相机的几何校正处理对比推扫式相机更为复杂，特别是正反扫描行之间，容易出现不配准、有缝隙或叠加等问题。文章根据IRMSS成像的机理，对CBERS-02星IRMSS图像存在的扫描行不配准问题进行了改进，达到了良好的效果。     

On the Measurements of D/H in QSO Absorption Systems Closing in on the primordial abundance of deuterium

We present our measurements of the deuterium to hydrogen ratio (D/H) in QSO absorption systems, which give D/H = 3.40 ± 0.25 × 10-5 based on analysis of four independent systems. We discuss the properties of two systems which provide the strongest constraints on D/H. We outline the systematic effects involved in measurements of D/H and introduce a sophisticated method of analysis which properly accounts for these effects.     

吊挂系统对波瓣混合排气系统气动热力性能影响

为了明确短舱中吊挂系统的堵塞效应对波瓣混合排气系统气动热力性能的影响,采用数值模拟的方法对包含吊挂的混合排气系统进行了定量研究。研究结果表明,受吊挂系统的影响,在波瓣混合排气系统混合段内,存在着一大尺度的回流区,其作用范围随吊挂长度的增加而增加。在性能参数方面,与未考虑吊挂系统时相比,考虑吊挂之后,虽然混合排气系统出口处热混合效率以及推力系数下降很小,最大降幅仅分别为0.017和0.01,但总压恢复系数却显著下降,最大降幅达到了0.03。此外,随着吊挂系统长度的变化,排气系统出口处的热混合效率、总压恢复系数以及推力系数变化幅度小于0.01,变化很小。     

Probing the first stars and black holes in the early Universe with the Dark Ages Radio Explorer (DARE)

A concept for a new space-based cosmology mission called the Dark Ages Radio Explorer (DARE) is presented in this paper. DARE’s science objectives include: (1) When did the first stars form? (2) When did the first accreting black holes form? (3) When did Reionization begin? (4) What surprises does the end of the Dark Ages hold (e.g., Dark Matter decay)? DARE will use the highly-redshifted hyperfine 21-cm transition from neutral hydrogen to track the formation of the first luminous objects by their impact on the intergalactic medium during the end of the Dark Ages and during Cosmic Dawn (redshifts z = 11–35). It will measure the sky-averaged spin temperature of neutral hydrogen at the unexplored epoch 80–420 million years after the Big Bang, providing the first evidence of the earliest stars and galaxies to illuminate the cosmos and testing our models of galaxy formation. DARE’s approach is to measure the expected spectral features in the sky-averaged, redshifted 21-cm signal over a radio bandpass of 40–120 MHz. DARE orbits the Moon for a mission lifetime of 3 years and takes data above the lunar farside, the only location in the inner solar system proven to be free of human-generated radio frequency interference and any significant ionosphere. The science instrument is composed of a low frequency radiometer, including electrically-short, tapered, bi-conical dipole antennas, a receiver, and a digital spectrometer. The smooth frequency response of the antennas and the differential spectral calibration approach using a Markov Chain Monte Carlo technique will be applied to detect the weak cosmic 21-cm signal in the presence of the intense solar system and Galactic foreground emissions.     

On kinematics of gas clouds in the broad-line region of active galactic nuclei and quasars

The kinematics of gas clouds in broad-line region of active galactic nuclei and quasars is considered. The motion of the clouds is governed by three forces — gravitational influence from the central supermassive body, radiational pressure from the continuum radiation, and resistance of the intercloud medium. Clouds moves radial but only outward motion gives a velocity field, which is in accordance with the observational data. The profiles of the permited lines are obtained in some simplify assumptions for the emissive capacity of the gas in clouds, and are in good agreement with the observational data. In the framework of the model under consideration there is a possibility to estimate some physical parameters of the nuclei such as mass of the central body and density of the intercloud medium.     

两凸平面相贯立体的隐藏线消去法

本文介绍了一种消去两相贯凸平面立体的隐藏线算法。首先利用外法线法单体消隐,然后用线与面比较法作组合消隐计算,逐一确定各个单体上可见棱线在组合体上的可见线段,最后显示或绘制所有的可见棱线段和两体的可见交线,得到消隐后的立体图。本法信息输入量较小,功能较强,不但适用于两相贯的凸平面立体的消隐,而且也适用于两迭加的凸平面立体的消隐。本程序还适用于两体具有共面的情况。     

Electron density inversed by plasma lines induced by suprathermal electron in the ionospheric modification experiment

Incoherent scatter radar (ISR) is the most powerful ground-based measurement facility to study the ionosphere. The plasma lines are not routinely detected by the incoherent scatter radar due to the low intensity, which falls below the measured spectral noise level of the incoherent scatter radar. The plasma lines are occasionally enhanced by suprathermal electrons through the Landau damping process and detectable to the incoherent scatter radar. In this study, by using the European Incoherent Scatter Association (EISCAT) UHF incoherent scatter radar, the experiment observation presents that the enhanced plasma lines were observed. These plasma lines were considered as manifest of the suprathermal electrons generated by the high-frequency heating wave during the ionospheric modification. The electron density profile is also obtained from the enhanced plasma lines. This study can be a promising technique for obtaining the accurate electron density during ionospheric modification experiment.     

Quasars and their emission lines as cosmological probes

Quasars are the most luminous sources in the Universe. They are currently observed out to redshift z≈7$z\approx 7$ when the Universe was less than one tenth of its present age. Since their discovery 50 years ago astronomers have dreamed of using them as standard candles. Unfortunately quasars cover a very large range (8 dex) of luminosity making them far from standard. We briefly review several methods that can potentially exploit quasars properties and allow us to obtain useful constraints on principal cosmological parameters. Using our 4D Eigenvector 1 formalism we have found a way to effectively isolate quasars radiating near the Eddington limit. If the Eddington ratio is known, under several assumptions it is possible to derive distance independent luminosities. We discuss the main statistical and systematic errors involved, and whether these “standard Eddington candles” can be actually used to constrain cosmological models.     

行星探测车连杆式差动平衡机构设计及运动学分析

根据行星探测车移动系统连接车体与左右两侧悬架的支撑机构的设计要求,提出一种对称的空间连杆式差动平衡机构,合理的空间布置、较大的摇臂摆角范围和良好的线平均性使其在移动系统中的运用取得较好效果。首先分析了机构的输入输出关系,给出车体与摇臂位姿关系的表达式。然后运用旋转变换的方法建立该差动平衡机构车体与左右摇臂的俯仰角位移方程。再运用Pro/Mechanism仿真校验理论模型的正确性,并运用校验后的理论模型分析部分参数对该差动平衡机构摇臂摆角范围和线性均化特性的影响,求解球铰连杆上下球面副相对主平面和在主平面内的转角范围,为机构的结构设计和装配提供了依据。最后展示了该机构在6轮导杆联动式悬架上的应用。