GGTm-Ts: A global grid model of weighted mean temperature (Tm) based on surface temperature (Ts) with two modes

With the development of Global Navigation Satellite System (GNSS), the detection of precipitable water vapor (PWV) using the GNSS atmospheric sounding technique becomes a research interest in GNSS meteorology. In the conversion of zenith tropospheric delay (ZTD) to PWV, the weighted mean temperature (Tm) plays a crucial role. Generally, the Tm estimated by the linear regression models based on surface temperature (Ts) cannot meet the requirement for global use, and the accuracy of Tm derived from the empirical models is limited. In this study, a new Tm model, named GGTm-Ts model, was developed using the global geodetic observing system (GGOS) atmosphere Tm data and European Centre for Medium-Range Weather Forecasts (ECMWF) data from 2011 to 2015. Resting upon a global 2.5°*2° grid of coefficients of Tm-Ts linear function, the new model can provide Tm at any site in two modes, one for the case with measured Ts provided, i.e., the accurate mode, the other for the case that Ts provided by a subroutine, i.e., the normal mode. The performance of GGTm-Ts model was assessed against the Bevis formula, GPT2w and GPT2wh model using different data sources in 2016-the GGOS atmosphere and radiosonde data. The results show that the GGTm-Ts model in accurate mode achieves best performance with an improvement of 46.9 %/15.3 %, 37.8 %/19.5 % and 34.4 %/14.2 % over other three models in the GGOS atmosphere/radiosonde comparison. For the normal mode, the GGTm-Ts model outperforms the GPT2w model and achieves equivalence results with the GPT2wh model. Moreover, the impact of Tm on GNSS-PWV was analyzed to validate the performance of the GGTm-Ts model.     

燃料电池接触电阻与温度相关性研究

研究双极板与气体扩散层接触电阻的形成机理，分析影响该接触电阻的因素，包括温度、载荷以及粗糙度等参数。通过建立数学模型以及利用仿真工具来预测接触电阻数值与变化规律，并进行金属双极板和碳纸气体扩散层的界面接触电阻测试用于模型验证，模型计算结果与实验结果吻合较好。     

空间级硅橡胶胶黏剂粘结界面改性分析

针对空间级硅橡胶与聚酰亚胺的粘结界面呈现低表面能、粘结可靠性差的现状，利用有机硅烷的润湿和键结作用对界面进行预处理，改善其粘结强度。通过FTIR、¹H-NMR和GC-MS分析，有机硅烷的主要成分中对粘结性能影响较大的是正硅酸丁酯和丙基三甲基硅氧烷，采用两种偶联剂对聚合物表面进行预处理，在聚合物间不同均相结构层通过硅烷相互扩散和互穿网络形成的分子桥可实现致密交联。力学试验表明，经有机硅烷对待粘结界面表面预处理，粘结构件的剪切强度值可达0.65 MPa；选择适当的有机硅烷作为附着力促进剂，利用其有机官能团、成膜性和交联性可提高粘结构件的可靠性。     

Effects of surface topography and specimen thickness on high-speed raindrop impact damage of CFRP laminates

Raindrop impact erosion has been observed since early days of aviation, and can be catastrophic for exposed materials during supersonic flight. A single impact waterjet apparatus is established for mimicking drop impacts at the velocities between 350 m/s and 620 m/s. Carbon Fiber Reinforced Polymer(CFRP) laminates with three different surface morphologies and specimen thicknesses are tested here. A central region with no visible damage has been noticed, surrounded by a “failure ring” with common...     

芳纶纤维表面改性及在EPDM 中的分散性

分别采用超声波法和物理机械法对芳纶纤维进行表面改性,研究了两种处理方法对其表面形貌、

分散性以及EPDM 复合材料性能的影响。结果表明:超声法和机械法使芳纶纤维表面形成差别较大的形貌特

征;其中芳纶经机械处理后呈现良好的分散性,其复合材料的拉伸强度和烧蚀深度分别为11. 3 MPa 和1. 2 mm

(10 phr),优于超声波法处理的结果。