临近空间高超声速目标滑跃式轨迹Sine-AIMM跟踪算法

针对单一的Sine模型算法无法与临近空间高超声速目标滑跃式轨迹准确匹配,现有的交互多模型(IMM)算法跟踪效果也不够理想的问题,提出一种基于多重贝叶斯准则的自适应交互式多Sine模型(Sine-AIMM)临近空间高超声速滑跃式目标跟踪算法.算法采用多个Sine模型对滑跃式轨迹进行匹配,并利用多重贝叶斯准则在线调整各模型...     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

无人机电静液起落架收放及刹车系统仿真研究

无人机起落架收放及刹车系统在无人机的起飞、降落和刹车的过程中发挥着至关重要的作用,随着无人机飞行条件和要求的日益严苛,传统的液压系统已经无法满足需要。电静液系统既保留了传统液压系统的优点,又兼备电作动的优势。根据电静液作动器的工作原理,设计一款无人机起落架收放和刹车功能一体化的电静液系统,将改进型的PID 控制方式运用到起落架收放的控制中,并且设计两种模糊PID 控制方式运用于防滑刹车功能中,在此基础上进行基于AMESim 和MATLAB/Simulink 的联合仿真用于验证系统性能,并对仿真结果进行对比分析。结果表明：模糊PID 的控制方式控制效果良好,可以有效地改善无人机起落架收放和刹车过程的稳定性,使得起落架收放更安全,刹车效率更高。     

超声速变马赫数风洞流场参数线性变化验证

旋转喷管型面使超声速变马赫数风洞在单次运行过程中可连续调节实验区的马赫数,便于研究飞行器的机动过程、进气道起动过程中的气动问题。在控制喷管型面旋转过程中,流场参数能否线性变化是衡量超声速变马赫数风洞性能的一个重要指标。分析变马赫数风洞实验区流场参数的线性变化规律,利用弹簧光顺的动网格技术建立数值仿真模型,验证喷管位于马赫数3.041~3.215 范围所对应的位置时,实验区流场参数是否满足线性变化规律。结果表明：通过对喷管型面旋转的控制实现了风洞实验区流场参数的线性变化,动态计算结果与预期实验区流场参数线性变化规律吻合良好;在不同加速度的流场参数线性变化过程中,各时刻实验区的平均参数与预期参数之间的偏差均小于0.13%。     

Numerical modeling of inhomogeneous orographic wave influence on planetary waves in the middle atmosphere

Parameterization of dynamical and thermal effects of stationary orographic gravity waves (OGWs) generated by the Earth’s surface topography is incorporated into a numerical model of general circulation of the middle and upper atmosphere. Responses of atmospheric general circulation and characteristics of planetary waves at altitudes from the troposphere up to the thermosphere to the effects of OGWs propagating from the earth surface are studied. Changes in atmospheric circulation and amplitudes of planetary waves due to variations of OGW generation and propagation in different seasons are considered. It is shown that during solstices the main OGW dynamical and heat effects occur in the middle atmosphere of winter hemispheres, where changes in planetary wave amplitudes due to OGWs may reach up to 50%. During equinoxes OGW effects are distributed more homogeneously between northern and southern hemispheres.     

Variations in statistical parameters of the NmF2 equinoctial asymmetry with latitude and solar activity near noon

Hourly values of the F2-layer peak density, NmF2, measured by 95 ionosondes near noon from 1957 to 2011 at low and middle geomagnetic latitudes of the northern and southern geographic hemispheres are used in a statistical study of the NmF2 equinoctial asymmetry. The ratios, R, of NmF2 measured during 61 days around the March equinox to NmF2 measured during 61 days around the September equinox at the same UT near noon during geomagnetically quiet daytime conditions for approximately the same solar activity conditions over the same ionosonde are analyzed. The conditional probability of the occurrence of R in an interval of R, the most probable value of R, and the mean expected value of R are calculated for the first time for the low, moderate, and high solar activity levels to study variations in these statistical parameters with latitude and solar activity. These statistical parameters are averaged over 5° geomagnetic latitude interval in the northern and southern geographic hemispheres to calculate and to study for the first time trends in latitude and solar activity of these averaged NmF2 equinoctial asymmetry statistical characteristics.     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

迎角受限的高超声速飞行器固定时间鲁棒控制

针对高超声速飞行器动力学模型强耦合、非对称时变迎角限制、气动参数高度不确定以及跟踪误差收敛速率要求高等问题,设计了一种考虑非对称时变迎角限制的高超声速飞行器固定时间非奇异切换控制策略。为了解决非对称时变迎角限制问题,首先限制迎角虚拟控制器的幅值并设计固定时间误差补偿系统补偿迎角虚拟控制器饱和带来的不利影响,然后设计了一种新的光滑切换的非对称时变障碍函数限制迎角跟踪误差,从而使迎角满足非对称时变限制。光滑切换技术以及固定时间收敛技术也应用于其他虚拟控制律和实际控制律的设计中,以避免奇异值问题并且保证闭环系统的固定时间稳定。此外,设计了一种固定时间稳定的鲁棒补偿器用以补偿系统不确定性带来的不利影响。严格的数学推导证明了本文方法的正确性,仿真结果验证了本文方法的有效性和优越性。     

三维内转式进气道对双旁进气飞行器力矩特性的影响分析

为了研究三维内转式进气道对飞行器力矩特性的影响规律,对一系列设计状态为Ma=6.5的内转式进气道展开力矩特性研究。对不同布局形式,进气形式以及基准流场中心体的内转式进气道对飞行器力矩特性的影响展开分析研究。研究结果表明,对于内转式进气道而言,有连接板的水滴型进气道双侧布局力矩特性较优,且容易满足飞行器总体需求;布局形式对进气道的力矩特性影响最显著,进气形式对侧滑力矩的影响比基准流场中心体影响更明显,而抬头力矩和滚转力矩受基准流场中心体影响更加突出;中心体在0~0.1Rs(Rs为基准流场入口半径)变化时,抬头力矩变化不大,而在0.1~0.2Rs抬头力矩变化明显。     

飞机液压管路支撑的有限元建模方式对应力分析的影响

在飞机典型液压导管不同构型和负载模式下,做了应力试验测量,得到应力试验的数据,并在有限元环境MSC.PATRAN中,针对导管的不同构型建立有限元分析模型,对每种构型下支架与卡箍采用八种不同的简化方式,得到仿真结果。然后将不同简化方式的仿真结果与试验结果作对比分析,考虑不同因素(如支架刚度、卡箍橡胶刚度、导管与橡胶间的摩擦与滑动等)对分析结果的影响,找到了在工程上简单易行,精度上可以接受的支撑简化方法。