多维动态参数的多层Bayes融合估计

在多维动态参数的分层模型下，运用多层Bayes估计方法和离散线性模型状态估计方法，给出了动态参数的Bayes融合估计，并以飞行器试验分析的一些例子，说明方法的运用。     

航天器推进系统管路充填过程动态特性(Ⅱ)实验模拟与结果评估

针对某一具有工程背景的卫星推进系统,建立了一个包括抽真空设备的实验模拟系统,以水为介质进行真空充填过程实验研究,结果表明充填过程中存在较强水击;利用数学模型对实验室系统充填过程进行仿真,计算结果与实验测量值吻合,表明模型仿真是可靠的。     

火焰稳定器射流喷口形状对燃烧性能的影响

为了探讨层缘吹气式火焰稳定器的射流喷口形状对燃烧性能的影响，在来流50m/s，573K条件下，分别对连续长缝、不连续宽缝、均布圆孔三种不同喷口形状的火焰稳定器的燃烧性能进行了实验研究，对比了它们的贫熄特性、燃烧效率和流阻损失。研究发现，在实验条件范围内，连续长缝形喷口稳定器的燃烧性能较其他两种不连续喷口稳定器优越，具有较高的燃烧效率、较宽的贫熄边界和较小的流阻损失。     

3D-C/SiC复合材料拉-拉疲劳模量和电阻的变化

在室温最大应力为250MPa，应力比R＝0．1和频率为60Hz条件下，对3D－C／SiC复合材料进行了拉－拉疲劳试验。用共振法和电阻增量仪分别测试了杨氏模量及电阻的变化。结果表明：随循环次数增加，杨氏模量呈显著下降，缓慢下降和突然下降的变化规律。杨氏模量的下降大部分发生在疲劳循环的前600次。缓慢降低阶段约占疲劳寿命的94％以上，此阶段杨氏模量变化率与循环次数的对数近似呈线性关系，电阻变化率除首次循环降低外，随着循环次数增加一直在增加。增加规律大致可分为缓慢增加，台阶式增加和急剧增加三个阶段。材料的电阻变化率基本反映了纤维的损伤程度和破坏形式，可作为表征复合材料纤维损伤的有效参量。     

利用多普勒原理测量微机电系统中微结构的动态特性

介绍了将显微扫描激光多普勒测振仪与基础激振法相结合的微结构动态特性的非接触无损测量方法、扫描激光多普勒测振仪的工作原理、设计的基础激振器及其驱动信号.并给出典型微结构--微悬臂梁的测量结果.测量结果与理论计算及有限元仿真结果相符,验证了该方法的有效性.     

石墨纤维/改性氰酸酯复合材料的应用研究

采用环氧树脂对4,4-二氰酸酯基二苯基丙烷(BADCy)进行共聚改性,通过DSC分析,确定了固化工艺参数,并与石墨纤维(UHMCF)复合制成单向板,测试了不同后处理温度制得的单向板力学性能,并与现用UHMCF/树脂基复合材料单向板的力学性能进行了比较,测试了UHMCF/改性氰酸酯的空间环境性能;制备了UHMCF/改性氰酸酯结构件,测试其性能,并与现用UHMCF/树脂基复合材料同类结构件的性能进行了比较。结果表明:UHMCF/改性氰酸酯不论是单向板还是结构件的性能均优于现用UHMCF/树脂基复合材料的性能,且满足空间环境对航天器结构材料性能的要求。     

D/H and Nearby Interstellar Cloud Structures

Analysis of UV spectra obtained with the HST, FUSE and other satellites provides a new understanding of the deuterium abundance in the local region of the galactic disk. The wide range of gas-phase D/H measurements obtained outside of the Local Bubble can now be explained as due to different amounts of deuterium depletion on carbonaceous grains. The total D/H ratio including deuterium in the gas and dust phases is at least 23 parts per million of hydrogen, which is providing a challenge to models of galactic chemical evolution. Analysis of HST and ground-based spectra of many lines of sight to stars within the Local Bubble have identified interstellar velocity components that are consistent with more than 15 velocity vectors. We have identified the structures of 15 nearby warm interstellar clouds on the basis of these velocity vectors and common temperatures and depletions. We estimate the distances and masses of these clouds and compare their locations with cold interstellar clouds.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

运输类飞机结构设计安全系数的探讨

中国民用航空规章运输类飞机适航标准25.303要求采用1.5的安全系数,该要求同其他相关适航条款,例如25.307"结构符合性的证明"、25.603"材料"、25.605"制造方法"、25.613"材料的强度性能和材料的设计值"等,共同保证了飞机结构的高可靠性。理论上,当材料、载荷、分析等方面的不确定性降低,采用低于1.5的安全系数可以保证结构具有同等的高可靠性;另一方面,当材料、载荷、分析等方面的不确定性大于目前适航规章所允许的水平,通过采用大于1.5的安全系数也可以保证结构具有等同的高可靠性。为了在民用运输类飞机的适航取证/审定过程中,在保证结构可靠性的前提下,能够根据具体情况适当调整结构安全系数,在综合研究中国民用航空规章第25部《运输类飞机适航标准》相关条款内在联系的基础上,探讨了载荷、材料性能、分析方法等不确定性对飞机结构安全系数的贡献。研究结果表明,目前1.5的飞机结构安全系数,用于考虑载荷、材料性能、分析方法等不确定性的系数分量分别为1.2、1.12、1.116.     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.