ADINA软件在固体发动机设计中的应用

简要介绍了大型结构分析软件ADINA的主要功能、特点、求解过程,以及应用它对某型号发动机药柱进行的轴对称有限元分析.结果表明,ADINA软件应用于固体火箭发动机结构分析是可行的.     

平显成像抖动问题分析与解决方法

简述了某型直升机选装的平显系统的组成和功能．针对在实际应用中遇到的平显在飞行中成像抖动现象进行了分析和总结，并给出了解决问题的方法。     

套筒式张线天平的研制

根据民机张线测力试验的特殊要求,研制了一台套筒结构形式的张线天平。详细介绍了该天平在研制中遇到的难点、关键技术的解决措施以及研制的结果。天平元件布置在58mm的外套筒上,内杆直径为44mm,外套筒和内杆通过楔块焊接在一起。法向力、俯仰力矩和滚转力矩为拉压变形,横向力和偏航力矩为＂S＂形变形,轴向力为弯曲变形,元件支撑部分受拉压变形且刚度较强。通过对天平进行有限元分析,在法向力和俯仰力矩作用下,得出的应变结果与实际输出基本吻合。风洞试验结果表明：天平设计合理,天平外套筒、内杆及张线支撑系统刚度好,天平各分量测量精度高。     

粘钢加固在增强结构强度中的应用

本文结合工程实例介绍了采用粘钢加固法来增强结构强度的设计与施工 ,初步探讨了结构增层改建中采用粘钢加固的计算方法、施工工艺及取得的实际效果。     

Effect of “Noisy” sun conditions on aircrew radiation exposure

In computer codes used to estimate the aircrew radiation exposure from galactic cosmic radiation, a quiet sun model is usually assumed. A revised computer code (PCAIRE ver. 8.0f) is used to calculate the impact of noisy sun conditions on aircrew radiation exposure. The revised code incorporates the effect of solar storm activity, which can perturb the geomagnetic field lines, altering cutoff rigidities and hence the shielding capability of the Earth’s magnetic field. The effect of typical solar storm conditions on aircrew radiation exposure is shown to be minimal justifying the usual assumptions.     

基于三维有限元的火箭模态振型斜率预示方法研究

振型斜率火箭是姿控系统设计的重要参数,对飞行任务的可靠性与安全性有着至关重要的作用。依据全箭动特性的测量原理及参数定义,结合三维有限元建模方法和模型修正技术,全面考虑了速率陀螺、惯组安装位置处的局部刚度对振型和振型斜率的影响,建立了基于局部细节精细化建模的全箭模态振型斜率预示方法,并总结了3种不同的振型斜率提取方法,提高了振型斜率的预示精度。同时提供了三维模型振型一维化的方法,解决了使用三维有限元模型计算弹性运动方程式系数的难题。     

Variations of geomagnetic cutoff rigidity in the southern hemisphere close to 70°W (South-Atlantic Anomaly and Antarctic zones) in the period 1975–2010

We report the existence of rapid variations in (effective) geomagnetic cutoff rigidity (Rc) between the equatorial and Antarctic zones adjacent to the Andes Mountains, revealed by the variation rate of geomagnetic cutoff rigidity (VRc) in the period 1975–2010. Our analysis is based on empirical records and theoretical models of the variations in cosmic rays and on the structure of geomagnetic fields. These have given us a different view of variations in Rc in time and space along the 70°W meridian, where secular variations in the geomagnetic field are strongly influenced by the proximity of the South Atlantic Magnetic Anomaly (SAMA), one of the most important characteristics of the terrestrial magnetic field that affects our planet, close from the equator to the 50°S parallel and from South America to South Africa. The VRc presents rapid changes in mid-latitudes where SAMA exerts its influence despite the existence of smooth changes in the geomagnetic field. This shows that these changes occur mainly in the spatial configuration, rather than in the temporal evolution of Rc. The analysis was performed using measurements from the Chilean Network of Cosmic Rays and Geomagnetism Observatories, equipped with BF-3 and latest generation He-3 neutron monitors, Fluxgate magnetometers, geomagnetic reference field (IGRF) and Tsyganenko 2001 model (just for completeness).     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

关于飞机结构疲劳载荷谱低载截除水平选取的探讨

低载截除作为飞机结构疲劳载荷谱简化的重要内容之一，可以大幅节省疲劳试验的时间与成本，然而目前对于低载截除水平的选取尚无公认的标准方法。本文对文献中已有的低载截除水平进行广泛地搜集，将低载截除水平划分为基于材料疲劳极限与基于谱最大载荷的两种选取方式，探究两种选取方式之间的联系，建立低载截除水平关系模型。结果表明：两种低载截除水平选取方式本质上是一致的，基于谱最大载荷的选取方式结合了飞机载荷与结构材料的特点，是对基于材料疲劳极限选取方式的延伸，所建立的低载截除水平关系模型能够为实际工程中疲劳载荷谱简化时低载截除水平的确定提供参考。