闭合薄壁剖面杆刚度计算的有限元素法

利用有限元法对飞机闭合薄壁剖面杆结构进行刚度计算，其结果与全尺寸试验值吻合较好。     

杆件拉伸实验中的破坏预估及结构模型修正研究

通过对强度理论、杆件拉伸概念及公式的分析研究，引入实验元件的几何刚度和弹性稳定性系数的概念，推导出实验元件的拉伸位移变化率的公式，并以此进行实验元件的破坏预估及结构模型修正。     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。     

Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

Structurally coupled characteristics of rotor blade using new rigid-flexible dynamic model based on geometrically exact formulation

In rotor dynamics, blades are normally modelled as a slender beam, in which elastic deformations are coupled with each other. To identify these coupling effects, new rigid-flexible structural model for helicopter rotor system is proposed in this paper. Finite rotations of the whole blade(on flapwise, lagwise, and torsional) are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade ...     

智能结构动力系统控制器设计和结构优化的综合分析

通过由两个压电作动器控制的空间桁架,将最优控制问题和结构中杆件截面积动态优化相结合,综合分析了二者的混合优化问题.计算结果表明,在结构动态响应特性不变的条件下,结构重量和控制需求均有显著下降.      

多关节坐标测量机结构参数的校准

多关节坐标测量机末端测头的位置准确度主要受各杆件结构参数误差的影响,为提高多关节坐标测量机的测量准确度,必须对各杆件的结构参数进行校准。首先应用ＤＨ 分析方法,建立了多关节坐标测量机的运动学模型,然后提出了一种简单、快速的单点 多姿态校准方法,运用全微分、最小二乘法和迭代算法等数学方法,建立了校准模型。实验表明,该校准方法适合于多关节坐标测量机结构参数真值的获得,并可极大地提高测量机的位置准确度。     

宇宙噪声的电离层闪烁与电离层不规则结构的结构参数

利用宇宙噪声是均匀的。各向同性的背景电磁辐射的假设,对电子密度涨落空间分布波数谱为负幂律函数的电离层不规则结构,用射线光学方法导出了闪烁功率谱的表示式。与射电星和轨道人造卫星信标的电离层闪烁相比,减少了因相对运动弓队的变量。用数值计算方法研究了电离层不规则结构的结构参量L_y、l_y、p、η对功率谱的影响。与实测资料比较,发现电离层吸收事件期间且Riometer记录的闪烁资料中,60%以上相应的不规则结构有L_y>103,η>η₀(0.2<η₀<0.5).