冕洞特征参数与地磁暴强度及发生时间统计

地磁暴是空间天气预报的重要对象.在太阳活动周下降年和低年,冕洞发出的高速流经过三天左右行星际传输到达地球并引发的地磁暴占主导地位.目前地磁暴的预报通常依赖于1AU处卫星就位监测的太阳风参数,预报提前量只有1h左右.为了增加地磁暴预报提前量,需要从高速流和地磁暴的源头即太阳出发,建立冕洞特征参数与地磁暴的定量关系.分析了2010年5月到2016年12月的152个冕洞-地磁暴事件,利用SDO/AIA太阳极紫外图像提取了两类冕洞特征参数,分析了其与地磁暴期间ap,Dst和AE三种地磁指数的统计关系,给出冕洞特征参数与地磁暴强度以及发生时间的统计特征,为基于冕洞成像观测提前1～3天预报地磁暴提供了依据.      

球形收集极结构的二次电子产额测量装置及测量方法

为了精确测量材料在不同入射电子能量和入射电子角度下的二次电子产额(secondary electron yield, SEY)以及二次电子能谱,研制了收集极为球形结构的SEY测量装置。首先介绍了装置的构成、测量原理及中和方法,并对测得的信号波形进行了分析。随后,测量了Cu材料和Al₂O₃薄膜材料的SEY值和二次电子能谱。结果表明：不同入射电子能量下SEY值的标准偏差分别小于0.055(Cu)和0.126(Al₂O₃);不同入射电子角度下SEY值与理论模型符合的很好,拟合R²值为0.998 64(Cu);出射的二次电子能量绝大部分集中在10eV(Cu)和20eV(Al₂O₃)以下,符合相关理论预期。     

一种基于雷达波束驻留模式的空间碎片轨道参数估计方法

利用窄波束的单脉冲精密跟踪雷达波束驻留模式进行碎片探测是空间碎片环境统计特征描述的一种重要途径。由于该模式观测弧段极短,且无法获取同一目标的多个弧段,因而利用常规定轨方法难以达到理想的效果。在圆轨道假设下,提出了一种利用波束驻留模式获取的单个极短弧计算碎片轨道高度和倾角的方法。首先利用碎片的距离确定其轨道高度;在此基础上,根据推导出的不同波束指向时碎片的距离变化率与轨道倾角的关系,得出其轨道倾角。该方法对于正南、正东指向的雷达波束驻留模式均适用,其中正南指向时还需利用方位角和仰角数据来区分轨道倾角与补角;但不适用于波束指向天顶的情况。仿真结果验证了方法的有效性。     

Experimental study on rotary ultrasonic vibration assisted drilling rock

Traditional rotary ultrasonic vibration drilling rock (f_z < 2A) is an effective drilling rock method, but its feed rate is limited by the ultrasonic vibration amplitude, resulting in lower drilling efficiency. In this paper, based on the requirements of drilling efficiency in the asteroid sampling mission, the process method of rotary ultrasonic vibration assisted drilling rock (f_z > 2A) was proposed. The mechanism of ultrasonic vibration assisted drilling rock was analyzed, and the propagation of ultrasonic energy in the process of ultrasonic vibration assisted drilling rock was analyzed. Using the small diameter cemented carbide triangular bit as the drilling tool, the comparative test of ultrasonic vibration assisted drilling and traditional drilling of sandstone, marble, and basalt was carried out. The experimental results showed that there was a specific feed rate range for each type of rock, so that the weight on bit required for ultrasonic vibration assisted drilling was less than that of traditional drilling. With the increase of firmness coefficient of sandstone, marble, and basalt, the ratio of weight on bit to feed rate was increased, and the effective feed rate range of ultrasonic vibration assisted drilling was reduced. The ultrasonic vibration assisted drilling rock (f_z > 2A) was one of the alternative methods for drilling rock on the asteroid surface.     

Fuel-optimal and Energy-optimal guidance schemes for lunar soft landing at a desired location

Two guidance schemes (i) fuel-optimal (ii) energy-optimal to realize soft landing at a desired location on the moon are developed using the optimal control laws. The optimal control laws are obtained by solving a two-point boundary value problem formulated based on Pontryagin’s principle. The guidance laws, adapted from the optimal control laws, are obtained as a function of unknown co-state variables. Differential Transformation (DT) technique is employed to determine the unknown co-states at each time instant of landing trajectory using the information on the current vehicle state, target landing site (loaded on-board apriori) and the time-to-go. The numerical integration of co-state dynamics is avoided due to the DT based approach. The time-to-go, a critical parameter for any guidance scheme, is computed and updated real time using a simple strategy which uses the current and end states. The simple strategy for time-to-go works well even when the shape of the trajectory is nonlinear. Extensive analysis is carried out to evaluate and compare the proposed guidance schemes. Further, the proposed schemes are compared with other popular guidance schemes. The DT based proposed schemes help quantify the landing masses for fuel-optimal and energy-optimal objectives. Other features of the proposed schemes are that they do not assume constant gravity field and independent of reference trajectory.     

Impacts of the PAH size and the radiation intensity on the IR features of illuminated dust within the reflection nebulae

Interstellar dust grains are illuminated in the reflection nebulae. Under conditions of the PAH size and the intensity of the interstellar radiation field, we follow their impact on the PAH aromatic infrared bands using the numerical DustEM code. For a dust model consisting of PAH, amorphous C and amorphous silicate, the PAH size varies in a range from 0.31 to 4.9 nm while the radiation intensity varies by a scale factor from 0.1 to 10⁴. Various trends of the results show the effect of varying both the PAH size and the radiation intensity on the strength of the aromatic mid-IR bands. Through small PAH sizes less than 0.7 nm, the grain temperature distribution of PAHs shows a small variation within 2–3 K at low radiation intensity while it increases to 15 and 8 K for PAH⁰ and PAH⁺, respectively, at higher radiation intensity. In final the variability in these results reveals the evolution of the dust grains under the physical space conditions of the reflection nebulae. In the mid-IR region, the contributions of PAH⁰ and PAH⁺ in the total SED intensity agree with the proportions of these PAHs observed in some reflection nebulae having higher radiation intensities.     

氧气/煤油发动机燃气热物理参数及输运系数计算

为了给氧气/煤油发动机设计和热防护设计提供必要的设计参数,针对氧气/煤油燃气进行热力学计算。运用吉布斯最小自由焓计算模型得到燃气平衡组成,通过拟合公式的方法得到燃气的热物理参数及输运系数。通过计算,得到氧气/煤油燃气的组分及比焓、密度、比熵、粘性系数等热物理参数和输运系数随温度和压力的变化特性。分析结果表明:水离解对氧气/煤油燃气组分变化存在显著影响,压力增大会导致水离解起始温度升高;氧气/煤油燃气比焓、比熵、定压比热、粘性系数、热传导系数变化在温度较低时受压力影响较小,当水开始离解后,压力的影响显著增强;组分在燃气中的扩散系数同时受到了温度和组分摩尔分数的影响;燃气普朗特数变化受热传导系数变化的影响较大,水离解后,热传导系数的迅速增大使燃气的普朗特数迅速减小。     

自然形高空气球上升过程形状预测

为研究高空气球在上升过程中的形状变化以及蒙皮应力分布情况，并给气球的结构设计以及强度设计提供一定依据，本文建立了气球上升过程中的热力学模型，同时基于高空气球蒙皮材料具有非线性、黏弹性、各向异性和不能抗压等特点，通过简化气球几何模型，采用最小势能法预测自然形高空气球上升过程中的形状，并分析了气球上升过程中的应力分布情况，气球的应力极值出现在气球顶部和底部，而经向应力的数量级远大于纬向应力；还对比了不同充气量下、不同时刻下气球形状及应力分布情况，为气球设计及工程应用提供了有效计算 方法。     

大飞机货舱地板下部结构有限元建模与适坠性分析

为了研究大飞机坠撞特性及数值分析方法，选取大飞机货舱地板下部结构为研究对象，建立其有限元模型，实现显式动力学的求解与分析。考察倒置、固支的货舱地板下部结构在200 kg落重以7 m/s垂直冲击下的结构响应、吸能与失效的动态行为，识别落重冲击过程中结构变形与失效模式、冲击响应特性及能量吸收与耗散机理。仿真结果表明，货舱地板下部结构的机身框组件、支撑件组件是主要吸能结构，冲击能量的吸收主要依靠上述结构的塑性变形与失效，紧固件的吸能贡献仅占1%左右。     

Depth dependency of neutron density produced by cosmic rays in the lunar subsurface

Depth dependency of neutrons produced by cosmic rays (CRs) in the lunar subsurface was estimated using the three-dimensional Monte Carlo particle and heavy ion transport simulation code, PHITS, incorporating the latest high energy nuclear data, JENDL/HE-2007. The PHITS simulations of equilibrium neutron density profiles in the lunar subsurface were compared with the measurement by Apollo 17 Lunar Neutron Probe Experiment (LNPE). Our calculations reproduced the LNPE data except for the 350–400 mg/cm² region under the improved condition using the CR spectra model based on the latest observations, well-tested nuclear interaction models with systematic cross section data, and JENDL/HE-2007.