Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

球墨铸铁曲轴缺陷与统计分析

本文介绍了在某球墨铸铁曲轴生产厂，采用磁粉和超声波无损检测方法对曲轴进行探伤，并对探伤中发现缺陷进行了统计分析，找出了缺陷多发部位，并就产生缺陷的原理及形成机理进行了分析，提出了相应的预防措施，以期对球墨铸铁曲轴生产者有所帮助。     

一种实现陀螺马达准确制动方案的研究

在分析了几种传统的电机制动方案基础上,提出了一种适合陀螺马达的能耗制动方案,该方案依据马达逐渐停转时自身产生的微弱电信号,再经放大处理后作为能耗制动的控制信号,实现陀螺马达准确、可靠、平稳的停止,避免了不及时切断电源而烧坏定子绕组的情况.     

GaInP2外延膜中施主—受主对复合发光带的能量关量

通过变温与变激发强度的近红外光致发光研究了用ＭＯＣＶＤ方法、生长在ＧａＡｓ衬底上的Ｇａ０．５Ｉｎ０．５Ｐ（ＧａＩｎＰ２）外延薄膜的１．１７ｅＶ发射带的发光特性。１．１７ｅＶ发光带性质与０．９９ｅＶ及０．８５ｅＶ发光带的性质有着明显的差别。１．１７ｅＶ发光带的机理可用施主－受主对的复合发光来解释，其中施主－受主对系白处在Ｇａ格位上的Ｓｉ（ＳｉＧａ）及其最邻近的Ｇａ空位（ＶＧａ）所组成，记作ＳｉＧａ－ＶＧａ。考虑到ＧａＩｎＰ２中存在着很强的电子－格子耦合作用及其Ⅲ族子格子为部分有序，所以在施主－受主对复合发光中应计及Ｆｒａｎｃｋ－Ｃｏｎｄｏｎ位移△ＦＣ及该对在等效的部分有序势场中的相互作用能Ｅｓ（ＤＡＰ）。Ｘ—射线衍射实验表明，部分有序结构相当于成分调制，因而可用Ｋｒｏｎｉｇ－Ｐｅｎｎｅｙ模型来计算Ｅｓ（ＤＡＰ）值。这样，我们就导出了施主－受主对复合发光的新的能量表示式。     

关于跨声速流动问题的多重解

本文讨论了跨声速流小扰动方程Riemann问题的多重解及物理上可实现的解的判别。     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

Analysis on Output Power for Multi-direction Piezoelectric Vibration Energy Harvester

To predict the performance of multi-direction piezoelectric vibration energy harvester,an equation for calculating its output power is obtained based on elastic mechanics theory and piezoelectricity theory.Experiments are performed to verify theoretical analysis.When the excitation direction is along Y direction,a maximal output power about 0.139 mW can be harvested at a resistive load of 65kΩ and an excitation frequency of 136 Hz.Theoretical analysis agrees well with experimental results.Furthermore,the performance of multi-direction vibration energy harvester is experimentally tested.The results show that the multi-direction vibration energy harvester can harvest perfect energy as the excitation direction changes in XY plane,YZ plane,XZ plane and body diagonal plane of the harvester.     

Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts

In the machining process of aircraft monolithic parts, the initial residual stress redistribution and structural stiffness evolution often lead to unexpected distortions. On the other hand, the stress redistribution and stiffness reduction during the machining process depend on the material removal sequence. The essence of the stress redistribution is releasing the initial elastic strain energy. In the present study, the influence of the material removal sequence on the energy release is studied. Moreover, a novel optimization method is proposed for the material removal sequence. In order to evaluate the performance of the proposed method, the mechanism of the machining distortion is firstly analyzed based on the energy principle. Then a calculative model for the machining distortion of long beam parts is established accordingly. Moreover, an energy parameter related to the bending distortion and the procedure of the material removal sequence optimization is defined. Finally, the bending distortion analysis and material removal sequence optimization are performed on a long beam with a Z-shaped cross-section. Furthermore, simulation and experiments are carried out. The obtained results indicate that the optimized sequence results in a low distortion fluctuation and decreases the bending distortion.     

高性能军用机环境控制系统研究发展趋势的探讨

讨论了未来高性能军用机环境控制系统发展可能采用的技术,例如：闭式空气循环技术;综合数字控制技术;蒸发循环技术;先进驱动的空气循环机和压气机技术;以及从属于综合机载机电系统的综合环境控制系统技术。