基于自适应通信拓扑的无人机集群弱路径约束下的分布式控制器设计

针对传统无人机集群飞行控制需要规划过多飞行路径的问题，设计一种结合线性二次型调节器(LQR)与机间防撞的分布式协同控制器，不需要为集群设计相对构型，只需给定一条满足无人机动力学约束的飞行路径，集群就可沿路径飞行。该控制器通过设计自适应通信拓扑来稳定加入机间防撞机制带来的抖振效应，并使集群具有良好可扩展性。仿真结果表明，所设计的分布式控制器可以实现规划一条路径下无人机集群无机间碰撞的稳定飞行。     

Static magnetic field analysis of hollow-cup motor model and bow-shaped permanent magnet design

The hollow-cup Permanent Magnet (PM) motors have the characteristics of low power consumption, and are widely used in the aerospace field. At present, the tile-shaped PMs used by hollow-cup PM motors have poor sinusoidal characteristics of the air gap magnetic flux density waveform, which will cause torque ripple. The existing method for improving the air gap magnetic flux density waveform is not very effective when applied to hollow cup, a special motor with no stator core and large air gap. A bow-shaped PMs structure is designed for the hollow-cup motor in this paper. First, the equivalent surface current method is used to calculate the analytical formula of the static magnetic field of the model. Then, the Finite Element (FE) method is used to calculate the static air gap flux density waveform of conventional tile-shaped PMs and bow-shaped PMs with different bow heights, and the corresponding harmonics and sine distortion are obtained by Fourier decomposition. The simulation results show that the bow-shaped PMs can effectively improve the sinusoidal characteristics of the static air gap flux density waveform. And the suitable bow height is determined. Finally, a prototype is made based on the suitable bow height for experiments, and compared with the analytical result and the FE result, and the accuracy and effectiveness of the bow-shaped PMs with the suitable bow height are verified.     

Model predictive control for close-proximity maneuvering of spacecraft with adaptive convexification of collision avoidance constraints

This study investigated model predictive control (MPC) for close-proximity maneuvering of spacecraft. It is essential for a designed MPC to effectively handle collision avoidance between the servicer spacecraft and the client spacecraft, especially while the client is rotating. The rotating motion of the client leads to dynamic changes in the collision avoidance constraints, which increases the difficulty of optimizing the control input in the MPC framework. Therefore, this study presents a method to improve the performance and computational efficiency of MPC for rendezvous and docking with a nonrotating or rotating client. An ellipsoid is adopted to model the client’s keep-out zone (KOZ). Given the spherical KOZ of the servicer, an expanded ellipsoid is introduced to describe the KOZ for the center of mass of the servicer and modeled as a nonlinear constraint. The linearization method for reference points located at the expanded ellipsoid is adopted to convexify the nonlinear constraints. The reference points are adaptively determined according to the positions of the servicer, client, and expanded ellipsoidal KOZ. The resulting hyperplanes are then used to describe the collision avoidance constraints. By utilizing the aforementioned strategies, combined with the calculated reference points, an adaptive convex programming algorithm suitable for real-time implementation of MPC is derived. The performance of the proposed method is demonstrated through numerical simulations.     

航天器反应式碎片规避动作规划方法

提出一种航天器反应式碎片规避动作规划方法，首先以扰动流体动态系统(IFDS)算法作为动作规划的基础算法，通过其中的总和扰动矩阵对航天器的轨道速度矢量进行修正，实现轨道机动规避；然后，建立基于双延迟深度确定性策略梯度(TD3)深度强化学习算法的反应式动作规划方法，通过TD3在线优化IFDS规划参数，实现对碎片群的“状态-动作”最优、快速规避决策。在此基础上，将优先级经验回放和渐进式学习策略引入该方法中，提升训练效率。最后，仿真结果表明，所提方法可使航天器安全规避多发、突发、动态且形状各异的空间碎片群，且具有较好的实时性。     

铺层区域划分对大展弦比机翼静气动弹性影响

为了研究铺层区域变量对大展弦比机翼静气动弹性的影响，本文在考虑几何非线性影响下，依据有限元分析，研究了外翼段铺层区域的划分以及90°铺层角度的个数对大展弦比机翼静气动弹性特性的影响。结果表明，0°、±45°、90°混合铺层的铺设效果优于只有0°、±45°铺层的区域；机翼变形情况随着外翼段铺层区域的增大而减小，且减小斜率逐步增大；外翼段铺层区域固定时，增加90°铺层角度个数会有效减小机翼变形，且机翼变形情况与增加的个数基本呈现负相关关系，其个数在铺层设计中可能存在一个最佳取值或最优占比。