用应变片测量应力的改进方法—二向应力片及三向应力片

本文就应变片直接测量应力的方法进行了探讨，提出二向应力片及三向应力片原理，使在实验应力分析的电测场合中，对于某点的应力分量的测量，无需进行几个应变片数据的分别采集，再综合成应力分量（正应力或剪应力），使读数应变与应力分量一一对应，且各测量数据之间在算法上没有耦合。二向应力片及三向应力片的使用，简化了测量数据的处理过程，在动态测量特别是冲击力测量中，具有一定的实用意义。     

典型散射体低频特性估计

本文探讨了几种典型金属物体的低频散射问题。介绍了低频散射截面的计算方法；对计算结果进行了分析；并就雷达目标低频散射特性提出了作者的观点。     

镇江-扬州南汊大桥抗风特性研究

介绍了拟建中的镇江—扬州公路大桥南汊悬索桥的节段模型风洞试验的主要内容、试验结果和颤振计算分析结果 ,据此评估了该桥的抗风特性     

RAM技术在隐身飞行器薄型翼设计中的应用

雷达吸波材料（ＲＡＭ） 技术是隐身技术中的重要技术之一，并且在隐身武器，尤其是隐身飞行器系统设计中得到广泛应用。本文首先简要阐述了雷达吸波材料吸波的基本原理，然后以隐身导弹薄型弹翼的低雷达散射截面（ＲＣＳ） 设计为例，探讨了涂覆型雷达吸波材料涂覆方案的设计思想和方法，最后给出一部分隐身飞行器薄型翼面低ＲＣＳ设计的样例。     

雷达寻的导引头天线雷达截面积研究

简要地阐述雷达寻的导引头天线的功能与发展、导引头天线雷达截面积（ＲＣＳ）问题提出的原因以及隐身的措施。介绍了某些形式导引头天线ＲＣＳ的测量和对测试数据的统计方法，并给出ＲＣＳ的测量结果。最后提出从ＲＣＳ考虑对雷达寻的导引头天线外形选择的初步看法。     

液体火箭发动机喷管收扩段的数控加工工艺研究

液体火箭发动机中，喷管收扩段是一个关键零件，数控加工工艺方法和程序编制方法非常复杂，国内外均在该方面有所研究。本文简述了喷管收扩段的数控加工工艺和程序编制方法以及在程序编制过程中建立的数学模型，并在通用的数控铣加工中心上实现了该零件的数控加工。     

Nuclear fragmentation database for GCR transport code development

A critical need for NASA is the ability to accurately model the transport of heavy ions in the Galactic Cosmic Rays (GCR) through matter, including spacecraft walls, equipment racks, etc. Nuclear interactions are of great importance in the GCR transport problem, as they can cause fragmentation of the incoming ion into lighter ions. Since the radiation dose delivered by a particle is proportional to the square of (charge/velocity), fragmentation reduces the dose delivered by incident ions. The other mechanism by which dose can be reduced is ionization energy loss, which can lead to some particles stopping in the shielding. This is the conventional notion of shielding, but it is not applicable to human spaceflight since the particles in the GCR tend to be too energetic to be stopped in the relatively thin shielding that is possible within payload mass constraints. Our group has measured a large number of fragmentation cross sections, intended to be used as input to, or for validation of, NASA’s radiation transport models. A database containing over 200 charge-changing cross sections and over 2000 fragment production cross sections has been compiled. In this report, we examine in detail the contrast between fragment measurements at large acceptance and small acceptance. We use output from the PHITS Monte Carlo code to test our assumptions using as an example ⁴⁰Ar data (and simulated data) at a beam energy of 650 MeV/nucleon. We also present preliminary analysis in which isotopic resolution was attained for beryllium fragments produced by beams of ¹⁰B and ¹¹B. Future work on the experimental data set will focus on extracting and interpreting production cross sections for light fragments.     

雷达箔条的特性及其战术应用

详细分析了箔条的有效散射截面、极化性能、频率特性、频谱展宽特性以及衰减特性等,并在此基础上,对箔条的战术应用方面进行了一定的探讨,综述了雷达箔条的发展趋势。     

Unsteady oscillation of a deformable airfoil section in incompressible flow

The unsteady aerodynamic loads (pressure increment and generalized forces) acting on a deformable thin airfoil section are determined for its arbitrary motion in the incompressible flow with transverse gusts. In this case, the exact Küssner solution in series is used for harmonic oscillation of an airfoil, in which the Theodorsen function is approximated by a sum of fractional functions with poles. In the time domain, these functions are replaced by the unknown functions that satisfy the one-type ordinary first order differential equations. The equations obtained are combined with the differential equations of the airfoil motion in the generalized coordinates and are used for analyzing the aeroelastic system stability and calculating its dynamic response to gust loads.     

一种计算隐身飞行器外形RCS的高精度快速算法

针对目前隐身飞行器外形雷达散射截面(RCS)难以准确计算的问题,提出了一种基于目标外形几何特征和矩量法的飞行器RCS算法.通过对矩量法阻抗矩阵元的理论分析,研究了物面感应电流随散射体表面曲率的变化规律,指出感应电流之间的耦合已成为影响隐身飞行器物面电流分布的重要因素,并且指出根据飞行器物面曲率分布可以预知强的感应电流耦合区域,利用这些强的电流耦合能够组成稀疏化的阻抗矩阵,从而实现飞行器RCS的快速求解.以金属双弧柱和典型隐身飞机外形为例,分析验证了物面曲率几何信息对计算结果精度的影响以及在提高计算效率方面的作用.数值结果表明该方法保持了与传统矩量法基本一致的计算精度,但计算时间仅为矩量法的7.2%.