Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

时域有限体积法的格式稳定性分析

以模型方程为例,采用MUSCL插值的S-W通量分裂格式,分别结合二步、四步龙格一库塔时间推进格式建立数值求解方法.用Von Neumann傅里叶级数分析方法,通过对不同格式的放大因子及色散因子的计算,分析了时域有限体积法(FVTD)格式的稳定性.     

Effects of yaw-roll coupling ratio on the lateral-directional departure prediction and restraint

The experimental data obtained from yaw-roll coupled wind tunnel tests are used for lateral-directional departure prediction, by linearizing the_b model to extract nominal dynamic derivatives at each coupling ratio.The prediction results are compared with those of the existing engineering methods which are based on the conventional aerodynamic derivatives.The comparison shows that the yaw-roll coupling ratio has a great influence on the departure susceptibility.The departure resistance will loss in partial region of the coupling ratio when the angle of attack is higher than a critical value.According to the stable and unstable regions of coupling ratio, a two-segment stability augmentation system with two different feedback gain matrices is obtained by pole-placement method.The two-segment stability augmentation system is used in the simulations of straight and level flight, steady turn, spin recovery and Herbst maneuver.The simulation results are also compared with the applications of a fixed-gain stability augmentation system designed by the conventional aerodynamic derivatives.When the yaw-roll coupling effects are fully considered, the two-segment stability augmentation system is more effective for departure restraint and can provide a better flying quality with less control energy.     

多尺度子域基函数矩量法解的稳定性与迭代法

通过对几个具体实例的计算，证实了在电磁场边值问题的矩量法求解过程中，选用不同的基函数其解的数值稳定性会有很大的差别。从而有可能选择一种数值稳定性比较好的基函数来进行矩量法求解。另一方面，提出了选用多尺度子域基函数，并通过多次迭代来提高矩量法解的精度的算法。实例计算表明，该算法不仅可以有效地降低系数矩阵的条件数，而且还降低了对计算机内存容量的要求，是一种有效的、稳定的算法     

关于外测新体制的一些分析与思考

针对外测新体制下数据处理中遇到的一些重要问题进行了较为深入的讨论。认真分析了多站测速系统的严重病态以及样条约束的EMBET算法在目标非平稳段的剩余截断误差等制约弹道处理精度的重要问题,并提出解决问题的思路与方法。     

RN-FD型固体氡气源的稳定性及应用分析

对测氡仪器进行精确校准是氡测量工作中的重要环节,固体氡气源的稳定性、可靠性在校准中则显得至关重要。本文通过分析RN-FD型固体氡气源对闪烁室K值的稳定性实验结果,认为:RN-FD型固体氡气源标称的浓度值与实际浓度值不一致,标称浓度值只是理论浓度值而不是实际浓度值,需重新刻度才能使用;RN-FD型固体氡气源抽气循环时间不同则浓度不同,但抽气循环时间固定,观测结果比较稳定;对于没有α检查源的台站,RN-FD型固体氡气源可用于氡观测仪器坪区检查。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

Stability analysis of robotic longitudinal-torsional composite ultrasonic milling

Currently, industrial robots are considered as an alternative towards traditional machine tools. Especially for the large-scale parts milling, robotic flexibility and low cost make it possess the irreplaceability. However, the milling chatter caused by its weak rigidity hampers robotic application and promotion severely in aviation industry. Rotary ultrasonic milling (RUM) technology with one-dimensional axial vibration has been proven and approved on avoiding robotic chatter. Based on this, the research of project team demonstrates that longitudinal-torsional composite ultrasonic milling (CUM-LT) involving separation characteristic has a greater advantage than RUM in terms of chatter suppression. Thereby, the CUM-LT as a new means is applied to avoid processing vibration of robotic milling system. And its influence mechanism on stability improvement of weak stiffness processing system is clarified. Meanwhile, the approaches to strengthen separation effect are provided innovatively. Moreover, a new analysis method of robotic CUM-LT (RCUM-LT) stability is proposed on the basis of ultrasonic function angles. The simulation and experimental results indicate that compared with robotic RUM (RRUM), stability regions of separated RCUM-LT (SRCUM-LT) and unseparated RCUM-LT (URCUM-LT) are improved by 124.42% and 39.20%, respectively. The addition of torsional ultrasonic energy has a wonderful effect on the milling chatter suppression of low stiffness robots.     

进气道温度畸变问题的研究

重点研究稳态温度畸变对发动机稳定工作的影响。温度畸变分为周向温度畸变和径向温度畸变两种情况。温度畸变将使发动机喘振裕度降低。情况严重时可使发动机工作不稳定,或发动机熄火,从而危及飞行安全。本文半给出进气道温度畸变和稳定性因子的确定方法,作为进气道／发动机匹配研究的基础。