动态信号分析仪的校准方法

简要介绍了动态信号分析仪的校准方法，自动校准系统的校准时应注意的问题。     

基于光纤光栅变形光谱的疲劳裂纹扩展监测方法

为研究金属疲劳裂纹扩展的在线监测技术,基于改进传输矩阵的光谱模拟方法,建立反映光纤布拉格光栅（FBG）光谱变形机理的裂纹扩展在线监测方法。研制了疲劳裂纹扩展在线监测系统平台,提出基于平移不变量小波法的试验光谱去噪方法,解决试验光谱信号中非连续与快速变化点难以平滑的问题;提出仅与裂纹扩展状态相关的FBG光谱面积参数,克服了光谱中心波长、光谱带宽等传统特征参数仅适用于恒定外载与恒定温度或对裂纹不敏感的局限性,给出基于光谱面积曲线拐点的裂纹扩展状态判定依据。     

1553B总线分析仪校准方法的探讨

论述了１５５３Ｂ总线分析仪校准方法和内容，包括电气校准、规纺校准和噪声控制校准，并对实施过程中的关键技术作了分析。     

S参数标准的研制和网络分析仪检定

网络分析仪系统是一种宽频段、多参数、并能进行实时测量的大型频域、时域测量系统。主要介绍同轴、波导 S参数标准件的组成、设计方法、研制过程及参数定标的方法。并介绍了双频激光同轴量规计的设计方法、工作原理及利用它对标准件定标的情况。文章中提供了大量的数据 ,详细也列出了标准失配器、标准空气线等 ,S参数标准件在各频率点上定标的数据 ,从各不同方面验证了参数标准的准确性。     

RPC-IES: The Ion and Electron Sensor of the Rosetta Plasma Consortium

The ion and electron sensor (IES) is part of the Rosetta Plasma Consortium (RPC). The IES consists of two electrostatic plasma analyzers, one each for ions and electrons, which share a common entrance aperture. Each analyzer covers an energy/charge range from 1 eV/e to 22 keV/e with a resolution of 4%. Electrostatic deflection is used at the entrance aperture to achieve a field of view of 90°× 360° (2.8π sr). Angular resolution is 5°× 22.5° for electrons and 5°× 45° for ions with the sector containing the solar wind being further segmented to 5°× 5°. The three-dimensional plasma distributions obtained by IES will be used to investigate the interaction of the solar wind with asteroids Steins and Lutetia and the coma and nucleus of comet 67P/Churyumov–Gerasimenko (CG). In addition, photoelectron spectra obtained at these bodies will help determine their composition.     

基于频谱分析判定接收机错锁的方法研究

目前判定接收机错锁仅仅凭借经验,导致目标捕获时间长。本文基于模拟调相信号相干解调输出信号的谱线特征,提出一种新的简单判定接收机错锁的方法。采用该方法方便地实现了频率引导的闭环控制,提高了接收机的自动化程度。     

基于DPCA算法的星载多通道TOPSAR成像方法

方位向DPCA多通道技术能够提高星载TOPSAR模式的方位分辨率,但TOPSAR回波信号的场景多普勒频谱混叠和方位非均匀采样给多通道TOPSAR成像带来了困难。针对这个问题,提出了一种基于DPCA算法的星载多通道TOPSAR成像方法。该方法通过调整方位向发射/接收子孔径的等效相位中心位置,使等效相位中心分布基本满足均匀采样的要求,同时利用复制拼接的方法解决了TOPSAR多普勒频谱混叠问题,最后利用改进的SPECAN算法完成聚焦成像。该成像方法避免了方位向多通道非均匀采样信号的重构操作,同时复制拼接操作和改进的SPECAN算法避免了方位向数据分块操作和方位时域的扩展。点目标和分布目标的仿真结果验证了提出的成像方法。     

基于频率补偿的时延估计方法

无源时差定位中,当目标处于运动状态时,多普勒频率的存在将导致时延差估计精度变差。自相关法和互相关法相结合的多普勒频差估计方法可以获得可靠性较高、估计精度较好的频差估计结果。对该结果进行频差补偿后,采用基于相位谱的时延估计方法获得两信号间的时延差。经过仿真验证,这种基于频差补偿的时延估计方法可以有效降低多普勒频差对时延差估计精度的影响。     

Experimental study on impact of roller imbalance on cage stability

This study presents a method for measuring the imbalance in a small-sized cylindrical roller. The roller imbalance was calibrated on the built static-pressure-air flotation measurement machine. The impact of the roller imbalance on the dynamic characteristics of a cage were then studied on the aero-bearing test rig. The displacement spectrums with different roller imbalance of the obtained cage orbits under various bearing speed and radial load were used to evaluate the cage stability. The results show that the cage cannot form a stable operating state at a lower bearing speed with or without the unbalanced rollers. The cage with balanced rollers gradually develops stable motion with the increase of the bearing speed. The existence of a small roller imbalance causes the stability of the cage to deteriorate. With an increase in the bearing speed and radial load, the cage with the unbalanced rollers runs unsteadily accompanied by a high-frequency vibration when the roller imbalance is large enough. The vibration amplitude of the cage in the horizontal direction is greater than that in the vertical direction during an unstable operation, which is similar in the stable status.     

矢量网络分析仪在通信卫星转发器地面测试中的应用技术

将矢量网络分析仪应用于通信卫星转发器地面测试中,必须解决被测件频率变换及非线性等问题。文章从解决这些问题入手,给出三种典型的系统构成办法。同时就有关性能、应用范围和系统校准等问题作一些探讨。