浅论无人机机载卫通天线尺寸与数字信号传输带宽关系

卫星通信是无人机中继通信的重要手段。本文对无人机卫星通信链路中飞机总体设计关注的机载卫通天线尺寸选择问题进行了较详细的计算、探讨。     

Development of in-situ Space Debris Detector

Due to high relative velocities, collisions of spacecraft in orbit with Space Debris (SD) or Micrometeoroids (MM) can lead to payload degradation, anomalies as well as failures in spacecraft operation, or even loss of mission. Flux models and impact risk assessment tools, such as MASTER (Meteoroid and Space Debris Terrestrial Environment Reference) or ORDEM (Orbital Debris Engineering Model), and ESABASE2 or BUMPER II are used to analyse mission risk associated with these hazards. Validation of flux models is based on measured data. Currently, as most of the SD and MM objects are too small (millimeter down to micron sized) for ground-based observations (e.g. radar, optical), the only available data for model validation is based upon retrieved hardware investigations e.g. Long Duration Exposure Facility (LDEF), Hubble Space Telescope (HST), European Retrievable Carrier (EURECA). Since existing data sets are insufficient, further in-situ experimental investigation of the SD and MM populations are required. This paper provides an overview and assessment of existing and planned SD and MM impact detectors. The detection area of the described detectors is too small to adequately provide the missing data sets. Therefore an innovative detection concept is proposed that utilises existing spacecraft components for detection purposes. In general, solar panels of a spacecraft provide a large area that can be utilised for in-situ impact detection. By using this method on several spacecraft in different orbits the detection area can be increased significantly and allow the detection of SD and MM objects with diameters as low as 100 μm. The design of the detector is based on damage equations from HST and EURECA solar panels. An extensive investigation of those panels was performed by ESA and is summarized within this paper. Furthermore, an estimate of the expected sensitivity of the patented detector concept as well as examples for its implementation into large and small spacecraft are presented.     

基于容栅技术数显力矩扳手无线通信系统的设计

随着无线通信技术的飞速发展，许多电气电子系统中的数据传输方式逐步使用无线通信方式替代原来的有线数据通信方式。目前我公司使用的基于容栅技术的数显力矩扳手广泛应用于航空航天、兵器、船舶、铁路等领域，对数据测量、数据存储都有严格的要求，而传统的有线数据传输方式，将对测量环境带来了极大的限制，而且传输距离短、接线方式复杂，由于计算机传输接口有限，将给大量的数据传输带来不便。本文则使用一种低功耗芯片设计了一款无线通信模块，将目前数显力矩扳手的通信方式通过有线数据传输改为无线通信技术传输。这将给客户应用带来了极大的便利，适应了不同的环境，挺高了产品的性能和市场竞争力，可以达到多组设备数据同时显示到计算机上，该产品已经过测试验证可以达到预期的效果。     

An IPC-based Prolog design pattern for integrating backward chaining inference into applications or embedded systems

Prolog is one of the most important candidates to build expert systems and AI-related programs and has potential applications in embedded systems. However, Prolog is not suitable to develop many kinds of components, such as data acquisition and task scheduling, which are also crucial. To make the best use of the advantages and bypass the disadvantages, it is attractive to integrate Prolog with programs developed by other languages. In this paper, an IPC-based method is used to integrate backward chaining inference implemented by Prolog into applications or embedded systems. A Prolog design pattern is derived from the method for reuse, whose principle and definition are provided in detail. Additionally, the design pattern is applied to a target system, which is free software, to verify its feasibility. The detailed implementation of the application is given to clarify the design pattern. The design pattern can be further applied to wide range applications and embedded systems and the method described in this paper can also be adopted for other logic programming languages.     

航天器电线电缆寿命预测模型研究

随着航天器复杂大系统的高速发展，以及器上电子产品的广泛应用，使得电线电缆大量应用于复杂系统之间的功率输送和信号控制。在航天器运行过程中，电线电缆由于受到空间布局限制，交叉重叠；同时受振动、温度、空间辐射等外部环境影响，致使电缆老化进而引发其他电气故障。介绍了基于可测特征参数的寿命模型建立方法，得出电缆剩余寿命的预计模型，开展航天器电线电缆老化机制以及寿命预测模型研究，最终实现航天装备电缆寿命预测的能力。     

Automated design architectures for co-orbiting spacecraft swarms for planetary moon mapping

This work describes the design and optimization of spacecraft swarm missions to meet spatial and temporal visual mapping requirements of missions to planetary moons, using resonant co-orbits. The algorithms described here are a part of Integrated Design Engineering and Automation of Swarms (IDEAS), a spacecraft swarm mission design software that automates the design trajectories, swarm, and spacecraft behaviors in the mission. In the current work, we focus on the swarm design and optimization features of IDEAS, while showing the interaction between the different design modules. In the design segment, we consider the coverage requirements of two general planetary moon mapping missions: global surface mapping and region of interest observation. The configuration of the swarm co-orbits for the two missions is described, where the participating spacecraft have resonant encounters with the moon on their orbital apoapsis. We relate the swarm design to trajectory design through the orbit insertion maneuver performed on the interplanetary trajectory using aero-braking. We then present algorithms to model visual coverage, and collision avoidance in the swarm. To demonstrate the interaction between different design modules, we relate the trajectory and swarm to spacecraft design through fuel mass, and mission cost estimations using preliminary models. In the optimization segment, we formulate the trajectory and swarm design optimizations for the two missions as Mixed Integer Nonlinear Programming (MINLP) problems. In the current work, we use Genetic Algorithm as the primary optimization solver. However, we also use the Particle Swarm Optimizer to compare the optimizer performance. Finally, the algorithms described here are demonstrated through numerical case studies, where the two visual mapping missions are designed to explore the Martian moon Deimos.     

无人船数据链SC-FDE突发信号载波同步方法

设计了一种适用于无人船组网数据链的SC-FDE突发通信时隙的帧结构,通过计算前导序列和独特字(UW)序列的自相关函数,调整差分相关长度,提出一种适用于多模式帧结构的载波同步方法。最后,通过仿真评估了所提出算法在不同条件下的有效频偏估计范围、频偏估计精度等性能,为算法工程实现的主要设计参数提供参考。     

Spacecraft formation-containment flying control with time-varying translational velocity

This paper investigates the problem of Spacecraft Formation-Containment Flying Control (SFCFC) when the desired translational velocity is time-varying. In SFCFC problem, there are multiple leader spacecraft and multiple follower spacecraft and SFCFC can be divided into leader spacecraft’s formation control and follower spacecraft’s containment control. First, under the condition that only a part of leader spacecraft can have access to the desired time-varying translational velocity, a velocity estimator is designed for each leader spacecraft. Secondly, based on the estimated translational velocity, a distributed formation control algorithm is designed for leader spacecraft to achieve the desired formation and move with the desired translational velocity simultaneously. Then, to ensure all follower spacecraft converge to the convex hull formed by the leader spacecraft, a distributed containment control algorithm is designed for follower spacecraft. Moreover, to reduce the dependence of the designed control algorithms on the graph information and increase system robustness, the control gains are changing adaptively and the parametric uncertainties are handled, respectively. Finally, simulation results are provided to illustrate the effectiveness of the theoretical results.     

Decentralized formation pose estimation for spacecraft swarms

For spacecraft swarms, the multi-agent localization algorithm must scale well with the number of spacecraft and adapt to time-varying communication and relative sensing networks. In this paper, we present a decentralized, scalable algorithm for swarm localization, called the Decentralized Pose Estimation (DPE) algorithm. The DPE considers both communication and relative sensing graphs and defines an observable local formation. Each spacecraft jointly localizes its local subset of spacecraft using direct and communicated measurements. Since the algorithm is local, the algorithm complexity does not grow with the number of spacecraft in the swarm. As part of the DPE, we present the Swarm Reference Frame Estimation (SRFE) algorithm, a distributed consensus algorithm to co-estimate a common Local-Vertical, Local-Horizontal (LVLH) frame. The DPE combined with the SRFE provides a scalable, fully-decentralized navigation solution that can be used for swarm control and motion planning. Numerical simulations and experiments using Caltech’s robotic spacecraft simulators are presented to validate the effectiveness and scalability of the DPE algorithm.     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.