现代战斗机的飞行试验

根据近几年新机飞行试验的工程实践,结合国外飞行试验的经验,叙述了现代战斗机飞行试验的特点,包括飞行试验的架次和周期,机载测试和地面实时监控,地面支持设施,它机试飞和组织管理;由于电传操纵显得更为突出的飞行试验技术,包括飞控系统稳定裕度、颤振和气动伺服弹性(ASE)、人机闭环飞行品质和大迎角试飞技术,提出了国内飞行试验工作方面目前存在的若干问题.      

基于GPS载波相位的微卫星姿态算法研究

GPS姿态系统是利用GPS载波相位测量来确定载体的航向和姿态角。本文对微卫星的GPS姿态系统进行了研究。重点解决短基线的GPS状态算法，讨论了姿态价格函数的了小化方法。测试结果表明，所提的算法对小于1m的基线是有效的。     

微波衰减测量过程失控的原因分析及解决方案

针对高频串联替代法微波衰减测量标准装置测量过程所出现的失控现象 ,从测量标准仪器、被测仪器、测量方法、人为因素等方面分析了失控的原因 ,制定并实施了相应的解决方案 ,使测量过程恢复到统计受控状态     

应用分力合成方法提高系统性能指标的研究

提出了将柔性结构的分力合成主动振动抑制方法和反馈控制律结合使用来提高柔性结构控制系统性能指标的方法。应用该方法仅需要知道闭环系统及柔性振动的频率及阻尼，而且可以同时抑制任意多个振动模态（包括控制器引起的振动，柔性振动及其他形式的振动），分力合成方法对频率及阻尼的不确定性具有较强的鲁棒性，使该方法易于工程实现，文章针对单柔性杆，将分力合成主动振动抑制方法和反馈控制相结合，设计了不同形式的大角度机动控制律，数值仿真和试验结果充分验证了方法的有效性。     

煤矿安全生产微型机监控系统

用微型计算机监测与控制煤碳生产,可以大大提高煤矿的安全生产和自动化水平,进一步改善煤矿的生产管理和增加企业效益。本文具体介绍了一个适用于中、小型煤矿的安全生产微型机监测与控制系统的功能、结构和软、硬件配置,并着重讨论了系统主站的几个关键技术问题是怎样解决的。该系统现已投入运行。实践证明,设计合理,性能稳定,工作可靠,它是一个特别适用于中、小型煤矿的廉价安全生产监控系统。     

InfraRed Astronomy Satellite Swarm Interferometry (IRASSI): Overview and study results

The far-infrared (FIR) regime is one of the few wavelength ranges where no astronomical data with sub-arcsecond spatial resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. For many research areas, however, information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, from highly excited carbon monoxide (CO) and especially from water lines would open the door for transformative science. These demands call for interferometric concepts. We present here first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for an FIR space interferometer. Extending on the principal concept of the previous study ESPRIT, it features heterodyne interferometry within a swarm of five satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1 arcsec over the whole wavelength range of 1–6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by members of our study team. We first give a motivation on how the science requirements translate into operational and design parameters for IRASSI. Our consortium has put much emphasis on the navigational aspects of such a free-flying swarm of satellites operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard, in quasi-real-time. We also address questions regarding the spacecraft architecture and how a first thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. This will have implications for the necessary internal calibration of the local tie between the laser metrology and the phase centres of the science signals and will ultimately affect the accuracy of the baseline estimations.     

Novel finite-time attitude control of postcapture spacecraft with input faults and quantization

This paper investigates a novel finite-time attitude control method for the postcapture spacecraft with an unknown captured space target in the presence of input faults and quantization. First, a quasi fixed-time convergent performance function is developed to quantitatively characterize the attitude tracking performance. Then, a backstepping prescribed performance attitude controller is devised via using integral barrier Lyapunov function. Compared with the existing works, the fractional state feedback and discontinuous controller is directly avoided to achieve the fixed-time convergence rate. Namely, the proposed fixed-time controller is easily achieved online. Finally, two groups of illustrative examples are organized to validate the effectiveness and robustness of the proposed control method.     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

电磁测力系统研究

介绍了电磁测力系统中静磁场分析与优化、通电线圈位置控制方法及提高线性度的自校准方法。运用Maxwell 3D进行仿真计算,得到了相对优化的磁密及磁均匀性,通过控制通电线圈在磁场中位置及分段线性微分技术,提高了电磁测力准确度。构建了试验装置,对比试验数据表明,该研究措施对于提高电磁测力准确度取得了较好效果。