回归设计铝合金7075微弧氧化形膜控制及膜特性

通过二次回归通用旋转组合设计了铝合金7075微弧氧化实验,建立了回归模型,量化了对陶瓷膜的多变量互约组合的影响趋势,解决了对生长陶瓷膜可预测、可控制的工艺。通过工艺特性曲线、金相分析、X射线衍射、扫描断层分析、摩擦磨损实验等手段,对形成的陶瓷膜特性进行了分析。结果表明:采用回归设计铝合金7075微弧氧化工艺是可行有效的,可在很大范围内调节陶瓷膜的微观和宏观结构,调节陶瓷膜相的比例关系,获得防腐、耐磨、电绝缘等高品质陶瓷膜。     

卫星优化热设计方法

试图把最优化技术应用于卫星工程的热设计中,提出一种优化热设计的方法,并以14个节点模型作为实例进行了计算分析,采用Hooke-Jeeves 的直接搜索法得到了满意的结果。初步编制的计算机程序,可作为卫星热设计方案计算的基础。     

模拟地球同步轨道辐照环境对光学太阳反射镜性能的影响

研究了模拟地球同步轨道辐照环境对卫星用温控涂层-光学太阳反射镜(OSR)性能的影响。对所研制的两类OSR 片进行的辐照试验项目有,真空紫外辐照、低能电子和两种能量的质子辐照。此外还进行了等离子体环境条件下的表面充/放电效应试验。经过相当于安装在地球同步轨道卫星南北极位置处,在空间七年所受到的电子、质子和紫外辐照总剂量的辐照后,导电型OSR 的太阳光谱吸收率α_s 由0.068增加到0.078,法向发射率ε_n 由0.83降低到0.72;而非导电型OSR的α_s 由0.066增加到0.085,ε_n 由0.82降低到0.76。表面充/放电试验的结果表明:导电型OSR 的充电电位仅在15～40V 之间,而非导电型OSR 的充电电位则可高达13kV。因此导电型OSR能有效地控制表面的充/放电现象。     

MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.     

线阵CCD平场校正及FPGA实现的研究

为了消除由于照明光源的非均匀性、镜头渐晕及CCD传感器噪声对图像质量造成的不良影响,首先从理论上分析了线阵CCD固定模式噪声和像素光电响应非均匀性的数学模型和产生的原因;对像素光电响应非均匀性这一主要影响因素,根据其光电响应模型提出了CCD像素光电响应非均匀性的两点校正方法,即求解出各个像素光电响应不均匀性的校正因子和暗偏置量系数,进而用以计算各个像素的校正量,实现逐点校正;针对校正算法大数据量、实时计算的要求,设计了基于现场可编程逻辑门阵列FPGA快速实现校正算法的硬件处理结构。最后,通过仿真和实验表明,两点校正方法可以有效地减小CCD像素光电响应不均匀性的图像噪声,提高图像质量,以便做后续精确处理。     

Space telescope and cosmology

The status of institutional arrangements and of the hardware development for Space Telescope are highlighted. After a brief summary of instrument characteristics, some examples are given on the possible use of the ST to study objects of interest to cosmology.     

基于在轨组装维护的多载荷协同观测卫星平台构型设计

针对高轨遥感卫星多载荷协同观测和一致测量应用需求,在前期总体技术方案研究的基础上,通过开展现有在轨组装航天器和高轨卫星公用平台的构型调研,提出了一种适用于多载荷协同观测需求的平台构型设计方案。平台利用CZ-5运载火箭发射并在轨展开,采用“网格式中心承力筒+板+桁架”式的总体构型,开展了主传力路径、贮箱承载结构、网格式中心承力筒等的细化设计工作,并进行了结构产品的初步设计,建立了平台结构整星的有限元模型。仿真分析表明:平台结构整星的各向一阶频率均能满足运载火箭的频率要求。基于标准化、通用化的平台接口设计,使其具备可扩展及可维修的能力,大大提升了平台鲁棒性。基于全网格筒的主承力设计,增强平台结构承载能力,并改善平台内部热环境。该设计方案可为基于在轨组装维护的高轨遥感大平台结构的设计提供有价值的参考。     

某型机翼内翼结构几何优化设计

某型机翼内翼结构布局优化模型,包括两类设计变量:位置变量和尺寸变量。本文利用PCL语言实现了在MSC.PATRAN环境下的参数化建模,以最小重量为目标函数,在强度和位移约束条件下,利用网格法进行位置寻优,并使用MSC.NASTRAN软件给出了最优尺寸变量。通过计算表明,本方法效率较高,结构重量稳定下降,优化效果明显。可以解决此类工程问题,具有一定的实用价值。     

复合材料桁架式发动机支架改型设计分析

采用DFH-3改进型平台的卫星变轨发动机支架直接安装在承力筒下锥段的内壁,要求在正弦振动载荷条件下,变轨发动机安装法兰面的最大加速度响应(5Hz~100Hz范围内)不得超过3g。针对上述条件,本文对DFH-3改进型平台变轨发动机支架直接继承现有产品的可行性进行了分析,并对几种可能的设计变更方式进行了分析,最终得到了对变轨发动机支架结构进行加强的优选方案。     

利用星间测距的轨道计算方法

基于天基空间监测的技术背景,根据单位矢量法的基本原理,给出了一种在已知目标卫星轨道面的前提下仅利用星间测距对目标卫星进行轨道计算的算法,并对已知轨道面的不同误差大小对定轨精度的影响进行了分析。模拟计算表明,轨道倾角的误差对定轨的精度影响更大。