跨大气层和空间区域飞行器的液体推进剂管理

根据大气层飞行环境与机动飞行特点,以及空间飞行环境与液体推进剂特点,分析了跨大气层和空间区域飞行器的保证重力场和失重状态下均无夹气液体输送、控制液体推进剂质心位移、剩余推进剂空间排放和重复使用等液体推进剂管理技术要求。阐述了相应的关键技术,如包括无夹气输送、液体质心位移控制、失重状态下的流体动力、参数确定和结构设计等管理模式确定,以及包括模型参数确定、模型、状态模拟和验证等的管理模式试验。     

空间相机像移补偿方法研究

介绍了空间相机拍照时产生像移的机理及国内外目前较常使用的不同像移补偿方法,并对光、机、电等不同实现方法进行分析比较,得出各种方法的优缺点及适用范围。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

交互式PID温度控制系统的设计

本文介绍了一种新型的PID温度控制系统。该系统利用单片机可以方便地实现对PID参数的选择与设定；也可以通过计算机与单片机的串行通讯，实现工业过程中的交互式PID控制。     

漂浮弹性空间机械臂动力学及振动抑制

本文讨论自由漂浮弹性空间机械臂系统动力学，建立系统非完整约束方程及动力学控制方程。运用Ｐｏｎｔｒｙａｇｉｎ 极值原理寻求最小控制力矩及抑制弹性振动的控制规律。数值模拟结果表明本文提出方法的有效性。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

航天器最优再入轨迹的选择分析

本文研究的目的是想获得具有最大有效载荷的航天器最优再入轨迹。返回段航天器的最大有效载荷等价于航天器离轨点所耗燃料质量与热防护系统（ＴＰＳ）质量之和达极小。文中把最大有效载荷的再入轨迹分三种情况作了分析：航天器ＴＰＳ质量不确定时，通过返回轨迹优化来获得航天器的最大有效载荷，并选择确定相应ＴＰＳ的质量；ＴＰＳ质量已确定时，通过再入轨迹优化来获得航天器的最大有效载荷；ＴＰＳ质量足够大时，通过多次穿越大气层来获得航天器的最大有效载荷。本文的结论可为航天器再入轨迹与ＴＰＳ的一体化选择提供思路。     

4J32低膨胀合金的应用与切削加工及热处理

文中就4J32低膨胀合金在航天遥感器型号产品上的应用和切削加工及热处理进行了综述。分析了这种材料难切削加工的原因,并详细介绍了机械加工中采取的措施和工艺流程及具体的热处理方法。     

模型修正中一种特殊广义逆的性质与功能

本文对一种特殊的广义逆矩阵在模型修正中使用时可能具有的性质与功能给予了间接的论证,从而为这种广义逆的进一步应用给予了提示。该论证表明,这种广义逆不仅具有增补方程个数的作用,而且还具有对修正模型的参考基增补高阶理论模态信息的功能。通过本文论证,文[2][4]之解的唯一性问题明确解决了,即为一个实用完备模态空间中的确定解。     

带充液腔的自旋卫星稳定性问题

本文应用Pfeiffer的思想讨论带轴对称充液腔的卫星系统自旋稳定性。本方法的基本思想为将轴对称腔内的液体旋度平均化,使之与空间位置无关,由此将液体的无限自由度问题离散化为有限自由度问题,从而用线性理论讨论系统的自旋稳定性。用这方法,本文讨论了带充液腔的非轴对称卫星系统、带充液腔的双自旋卫星系统的自旋稳定性,给出了它们的自旋稳定性判据。此外,本文还给出了一些带有不同形状腔体的卫星系统自旋稳定域图,为实际工程设计人员提供理论参考。