空间飞行体与等离子体在压缩区内的非稳态相互作用研究

研究了空间飞行体在运动过程中，其前端压缩区内飞行体与等离子体的、非稳态相互作用问题，得到了在强天线辐射源高频场作用下的控制方程．通过计算表明，飞行体上的天线可作为调制不稳定性的激发源，在等离子体中激发起很强的电磁孤波．     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

定常对称背涡流态下细长体绕流结构的演变

应用数值计算的方法模拟了细长体截面绕流结构的演变过程.指出随着细长体背涡的发展,导致截面流场的拓扑结构发生变化,会出现一种临界流动状态.并用微分方程的定性理论分析了此时流场中出现的一种高阶奇点.这种高阶奇点的指数为-3/2,它是结构不稳定的,稍有扰动就会产生分叉,使流场的拓扑结构发生变化.得出了定常对称背涡流态下细长体的空间绕流结构图.     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

空间碎片防护结构设计优化理论方法研究

航天器空间碎片防护结构设计优化在国际上属前沿课题，防护结构设计优化理论方法是其关键技术之一。在防护优化理论模型及其优化算法研究方面取得了突破性进展，建立了综合各类典型防护结构构型的统一的防护优化数学模型，提出了解决防护优化问题的几种算法：混合遗传算法，改进的差异演化算法和混合差异演化算法。最后采用航天器防护优化算例对防护优化理论方法进行了测试考核，优化结果表明了本文工作的可行性和有效性。     

Radiative and hybrid cooling of infrared space telescopes

The designs of cold space telescopes, cryogenic and radiatively cooled, are similar in most elements and both benefit from orbits distant from the Earth. In particular such orbits allow the anti-sunward side of radiatively-cooled spacecraft to be used to provide large cooling radiators for the individual radiation shields. Designs incorporating these features have predictedT _tel near 20 K. The attainability of such temperatures is supported by limited practical experience (IRAS, COBE). Supplementary cooling systems (cryogens, mechanical coolers) can be advantageously combined with radiative cooling in hybrid designs to provide robustness against deterioration and yet lower temperatures for detectors, instruments, and even the whole telescope. The possibility of such major additional gains is illustrated by the Very Cold Telescope option under study forEdison, which should offerT _tel5 K for a little extra mechanical cooling capacity.     

GH169合金细晶锻造工艺研究

为了提高涡轮盘的强度和低周疲劳性能,要求锻件具有ASTM10级以上的细晶组织国外在大型压力机上采用低温大变形锻造和直接时效热处理以获得性能良好的细晶锻件,而我国则试图采用锻锤生产GH169合金涡轮盘锻件,因此,需要探索适合国情的GH169合金细晶锻造工艺。根据以往的研究,δ相对GH169合金的显微组织有明显影响,因而可     

航空发动机全程滑态变结构控制研究

一种新的滑模变结构控制方法-全程滑态变结构控制首次应用于航空发动机控制系统，该控制方法能有效地缩短系统状态到达滑动模态的时间，避免了定常滑态变结构控制系统在能达阶段对扰动的敏感性，且其控制律的设计可以改善系统的瞬态性能，克服未知参数摄动的影响，仿真结果表明，基于全程滑态变结构控制所设计的发动机控制系统，其鲁棒性要优于发动机定常滑态结构控制系统。     

民用飞机机翼副油箱静载荷计算

以亚音速、大展弦比的大中型民用飞机机翼挂装副油箱为研究对象,分析CCAR-25部中载荷计算的相关适航条款内容,考虑外挂物自身运动及机翼结构弹性变形对副油箱气动载荷的影响,给出了副油箱静载荷计算的过载—速度包线,高度—速度包线、载荷计算情况等,在工程应用成熟的《运输类飞机载荷计算程序包》基础上,采用亚音速稳态定常流升力线理论与风洞试验相结合的方法,将机翼简化为悬臂梁进行气动弹性修正,开展副油箱气动力弹性修正计算、惯性力计算、副油箱质量实时更新、包线筛选等功能模块的研究,通过工程应用其计算精度满足要求,形成了满足适航条款的副油箱静载荷计算方法,规范了副油箱静载荷的计算流程,拓展了《运输类飞机载荷计算程序包》的功能。     

高科技与微型涡轮发动机的研制

在收集、分析国外某些微型涡轮发动机的文献和实物的基础上，结合参加自行设计微型涡轮发动机的体会，提出应用现有的和正在发展中的新技术、新材料、新工艺，将对微型涡轮发动机的性能和研制周期产生较大的影响。